• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.123-129
• /
• 2010

The fabrication of interconnect from titanium powders and $TiN_x$ powders is investigated. Corrosion-resistant titanium and $TiN_x$ are used as reinforcement in order to reveal high heat and corrosion resistance at the elevated temperature. We fabricated the plates for interconnect reinforced with $TiN_x$ by mixing titanium powders with 10 wt.% of nano-sized $TiN_x$. Spark Plasma Sintering (SPS) was chosen for the sintering of these composites. The plate made of titanium powders and $TiN_x$ powders demonstrates higher corrosion resistance than that of the plate of titanium powders alone. The physical properties of specimens were analyzed by performing hardness test and biaxial strength test. The electrochemical properties, such as corrosion resistance and hydrogen permeability at high temperature, were also investigated. The microstructures of the specimens were investigated by FESEM and profiles of chemical compositions were analyzed by EDX.

• 방사성폐기물학회지
• /
• 제12권2호
• /
• pp.135-151
• /
• 2014

상용의 GoldSim과 GoldSim 이동 모듈 (GoldSim Transport Module; GTM)을 이용하여 방사성폐기물 처분시스템과 같이 복잡한 질량 이동 시스템을 신뢰성 있고 효율적으로 모사할 수 있다. 그러나 GTM의 특성을 보다 정확하게 이해하여야 이를 사용하여 실제 처분시스템의 안전성 평가 프로그램을 개발할 때 발생할 수 있는 오류를 피할 수 있다는 것을 인지하는 것이 중요하다. 이를 위하여 GTM에서 다양하게 제공되는 요소 (element) 중, 질량 이동 모사에 유용한 Transport pathway의 특징에 대하여 소개하고, 방사성폐기물 처분시스템 안전성 평가를 위해 시스템 내 핵종의 거동과 같은 질량 이동 모사에서 이에 대한 올바른 활용 방안을 제시하였다.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.40-46
• /
• 2018

The light-weight of the research and development materials is actively carried out by overseas automobile companies and technology development continues in Korea. For the sake of fuel efficiency, the development of lightweight technology by improving the manufacturing method has been very effective. Recently, to maximize the effects of light weight, automotive interior parts have been applied by the micro-cellular injection molding using supercritical fluids and we call the Mucell manufacturing. This technique causes a problem in the quality of the surface of the products, because the shooting cells are revealed as the surface layer of the products by forming micro cells at the center of the products during injection molding. To overcome these phenomenon, we increased the temperature of injection molding using joule heating until critical value. In this study, we have predicted the problem of Mucell injection molding through the finite element analysis as changed the temperature by joule heating. From the result of finite element analysis, we have determined the optimized process and made the injection mold included electric current heating system with Mucell manufacturing analyzed the surface characteristics of the injection product according to changing mold temperature.

• 전기화학회지
• /
• 제17권3호
• /
• pp.201-208
• /
• 2014

본 연구에서는 산화그래핀과 카본블랙의 혼합담체를 이용하여 내구성이 향상된 백금촉매를 폴리올법으로 제조하였다. 삼전극 순환전압전류법을 이용한 전기화학성능 측정결과 적절한 비율로 조절된 혼합담지체에 백금을 담지시켰을 경우 초기 성능 감소없이 장기내구성이 향상되는 것으로 나타났다. 또한 회전원판전극을 이용하여 산소환원반응을 수행한 결과 혼합담체에 담지된 백금촉매가 카본블랙 단일담체에 담지된 백금촉매보다 우수한 고유활성값을 나타내었다.

• 한국세라믹학회지
• /
• 제42권12호
• /
• pp.854-859
• /
• 2005

Performance of micro scale intermediate temperature solid oxide fuel cell system has been successfully evaluated by computer simulation based on macro modeling. Two systems were studied in this work. The one is designed that the ceria-based electrolyte placed between composite electrodes and the other is designed that electrodes alternately placed on the electrolyte. The injected gas was composed of hydrogen and air. The polarization curve was obtained through a series of calculations for ohmic loss, activation loss and concentration loss. The calculation of each loss was based on the solving of mathematical model of multi physical-phenomena such as ion conduction, fluid dynamics and diffusion and convection by Finite Element Method (FEM). The performance characteristics of SOFC were quantitatively investigated for various structural parameters such as distance between electrodes and thickness of electrolyte.

• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.577-586
• /
• 2011

본 논문에서 DC 마이크로그리드의 동작분석을 위한 하드웨어 시뮬레이터의 개발에 관해 기술하고 있다. 이 하드웨어 시뮬레이터는 분산전원으로 풍력발전, 태양광 발전, 연료전지를, 그리고 에너지저장으로 슈퍼커패시터, 배터리를 포함하고 있다. 또한 전체시스템의 에너지관리와 상태모니터링을 수행하는 중앙제어기를 포함하고 있어 이더넷을 기반으로 한 통신을 통해 각 분산전원과 에너지저장에 탑재된 하위제어기와 연계되어있다. 개발한 하드웨어 시뮬레이터는 실제 상황을 고려한 DC 마이크로그리드의 성능분석에 활용될 것으로 기대된다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제16권4호
• /
• pp.124-129
• /
• 2008

Design practice has been made on an oil-less scroll air compressor as an air supply device for a 2 kW fuel cell system where air pressure of 2 bar and flow rate of 120 liter/min are required. Basic structure of the scroll compressor includes double-sided scroll wrap for the orbiting scroll driven by two crankshafts connected to each other by a timing belt. These features can eliminate thrust surface which otherwise would produce frictional heat and jeopardize reliable operation of the orbiting scroll and the scroll element's deformation as well. This study focuses on optimum scroll wrap design; orbiting radius has been chosen as an independent design parameter. As the orbiting radius changes, scroll sizes such as scroll base plate and discharge port diameters change accordingly. Gas compression-related losses and mechanical loss also change with the orbiting radius. With a scroll base plate diameter of 120mm at most and discharge port of at least 10mm, the orbiting radius should be within the range of 2.5-4.0mm. With this range of the orbiting radius, it was estimated by performance analysis that the compressor efficiency reached to a maximum of ${\eta}_c$=96% at the orbiting radius of $r_s$=3.5mm for the scroll wrap height-to-thickness ratio of h/t=5.

• 방사성폐기물학회지
• /
• 제9권2호
• /
• pp.87-92
• /
• 2011

본 논문은 극저준위폐기물 관리에 관한 중국의 정책과 규정들을 소개하고 있다. 오래된 시설의 중요한 해체 및 부지복구 프로그램에 주어진 바와 같이, 극저준위폐기물의 처분을 위한 새로운 시설의 필요성이 대두되고 있다. 여러가지 일반적인 설계원리들은 다중방벽에 의해 폐기물을 격리시키는 중저준위폐기물 처분시설과 같다. 콘크리트 방벽을 사용하는 것 대신에 벤토나이트 또는 고밀도 폴리에틸렌 멤브레인을 사용하는 것 외에 통상적으로 처분시설의 설계는 위해폐기물 처분시설의 설계와 같다 극저준위폐기물 처분시설 2개소의 공학적 설계가 소개되었다.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.75-80
• /
• 2012

A sputter-sublimation source was tested for high rate deposition of protective coating of PEMFC(polymer electrolyte membrane fuel cell) with high electrical conductivity and anti-corrosion capability by DC biasing of a metal rod immersed in inductively coupled plasma. A SUS(stainless steel) tube, rod were tested for low thermal conductivity materials and copper for high thermal conductivity ones. At 10 mTorr of Ar ICP(inductively coupled plasma) with 2.4 MHz, 300 W, the surface temperature of a SUS rod reached to $1,289^{\circ}C$ with a dc bias of 150 W (-706 V, 0.21 A) in 2 mins. For 10 min of sputter-sublimation, 0.1 gr of SUS rod was sputter-sublimated which is a good evidence of a high rate deposition source. ICP is used for sputter-sublimation of a target material, for substrate pre-treatment, film quality improvement by high energy particle bombardment and reactive deposition.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.289-290
• /
• 2012

This paper proposes a new active snubber boost PFC converter to provide a zero-voltage-switching (ZVS) turn-on condition and reduce electromagnetic interference (EMI) noise in home appliances and renewable energy applications, including solar or fuel cell electric systems. The proposed active snubber circuit enables a main boost switch of the boost-type PFC or grid converter to turn on under a ZVS condition and reduce the switching losses of the main boost switch. Moreover, for the purpose of a specialized intelligent power module (IPM) fabrication, the proposed boost circuit is designed to satisfy some design aspects such as space saving, low cost, and easy fabrication. Simulation and experimental results of a 2kW IPM boost-type PFC converter are provided to verify the effectiveness of the proposed active snubber boost circuit.