• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1518-1522
• /
• 2006

In the present study, it was observed how the phage-host system that is naturally reproduced in activated sludge is affected by the host inoculation. The system of Microlunatus phosphovorus and its phages was selected as the phage-host system native to an activated sludge system operated for 19 days under sequencing anaerobic-aerobic conditions with glutamate as the main carbon source. The phage-host system related to M. phosphovorus was monitored by plaque assay for the phages and by fluorescent in situ hybridization (FISH) for the bacterial host. In addition, the whole phage structure was also monitored by pulsed-field gel electrophoresis (PFGE). During the first 9 days, the phage-host system was more or less steady at approx. 9% (FISH/ DAPI) for M. phosphovorus and approx. 10,000 PFU/ml for its lytic phages. Microlunatus phosphovorus JCM9379 was inoculated into the activated sludge on day 10. Right after the inoculation, M. phosphovorus was approx. 24% (FISH/DAPI) whereas its lytic phages dropped down to approx. 500 PFU/ ml. After the host inoculation (within 9 days), however, the phage-host system eventually reverted to its original level in each population. On the other hand, the whole phage structure was not significantly changed by M. phosphovorus inoculation but stable throughout the process operation. Only the minor change that four phage groups gradually became abundant after the host inoculation was observed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.862-865
• /
• 2008

Wireless energy supply for an MAV propulsion system using microwave was developed. This system consists of three sub system; the transmitter system, the rectenna system, and the tracking system. In the transmitter system five horn antennas were used as the antenna elements for the phased array system and both the beam divergence and steering angle was about 9deg. Eight rectennas were arrayed in parallel to obtain enough power to drive the electric motor on the MAV(the voltage was 250mV and the current was 6.8mA) in rectenna system. In tracking system two units of antenna system with leaf pattern which received the linearly-polarized wave despite the MAV yaw angle were set in each axis(x, y) for tracking an MAV in a 2-Dimentional space. And three output voltages $V_{com},\;V_1$ and $V_2$ were loaded in the PC to detect if the distance between transmitter and receiver was not constant. Finally when the microwave beam was steered by the phased array system the output voltage from rectenna was measured at 62cm while the MAV circled around above the transmitter system.

• International Area Studies Review
• /
• v.12 no.2
• /
• pp.99-123
• /
• 2008

In this paper, technology gap between Korea's manufacturing industries compared to technology frontier countries was estimated in order to take into account Korea's status as a technology follower country. Then by using this measure the role of technology gap was investigated in explaining total factor productivity growth of the Korean manufacturing at industry level. The main empirical findings are as follows: First, the conventional factors that were emphasized in the previous literature such as R&D intensity, trade openness and human capital play important role in explaining the growth rate of Korea's total factor productivity. Second, the larger the technology gap between Korea and technology leader country (and the faster the technology growth rate in the leader country), the higher the growth rate of total factor productivity in Korea as well. Third when the technology gap is large, the most efficient way of absorbing higher technology from frontier country seems to be the international trade channel rather than R&D or human capital accumulation.

• Journal of Korean Neurosurgical Society
• /
• v.66 no.5
• /
• pp.525-535
• /
• 2023

Objective : We performed an expanded multi-ethnic meta-analysis to identify associations between inflammation-related loci with intracranial aneurysm (IA) susceptibility. This meta-analysis possesses increased statistical power as it is based on the most data ever evaluated. Methods : We searched and reviewed relevant literature through electronic search engines up to August 2022. Overall estimates were calculated under the fixed- or random-effect models using pooled odds ratio (OR) and 95% confidence intervals (CIs). Subgroup analyses were performed according to ethnicity. Results : Our meta-analysis enrolled 15 studies and involved 3070 patients and 5528 controls including European, Asian, Hispanic, and mixed ethnic populations. Of 17 inflammation-related variants, the rs1800796 locus (interleukin [IL]-6) showed the most significant genome-wide association with IA in East-Asian populations, including 1276 IA patients and 1322 controls (OR, 0.65; 95% CI, 0.56-0.75; p=3.24#x00D7;10^-9) under a fixed-effect model. However, this association was not observed in the European population (OR, 1.09; 95% CI, 0.80-1.47; p=0.5929). Three other variants, rs16944 (IL-1β), rs2195940 (IL-12B), and rs1800629 (tumor necrosis factor-α) showed a statistically nominal association with IA in both the overall, as well as East-Asian populations (0.01<p<0.05). Conclusion : Our updated meta-analysis with increased statistical power highlights that rs1800796 which maps on the IL-6 gene is associated with IA, and in particular confers a protective effect against occurrence of IA in the East-Asian population.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.165-177
• /
• 2000

Ceramic on ceramic total hip prostheses are developed to apply to young patients because lifetime of polyethylene joint prostheses is limited by loosening due to biological response. As mating faces of all-ceramic joint must be highly conformed to reduce stress concentration, wear properties of flat surfaces are investigated in this study. Through wear tests at 2 MPa of contact pressure and 36 mm/s of sliding velocity, alumina and silicon carbide keep low wear rate, high hardness and smooth surface. Soft surface film was detected after the test in bovine serum. This suggests that boundary lubrication is effective to reduce wear in all-ceramic joint.

• Korean Journal of Organic Agriculture
• /
• v.24 no.3
• /
• pp.355-368
• /
• 2016

There are growing interests in environmental friendly cultivation for the matter of health concern. This study analyzes an economic efficiency of strawberry and tomato farming by considering the role of environmentally friendly cultivation. The Database of Rural Development Administration is used for strawberry and tomato farming households. We adopt a Bayesian stochastic frontier model to resolve a small sample property of the data. Empirical finding is that environmentally friendly cultivation improves the revenue of farming but the effect on net profit is not conclusive which calls for future research.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.35 no.3
• /
• pp.59-68
• /
• 2010

Improving productive efficiency is important for strengthening a competitiveness of coastal fisheries. This paper examines the productive efficiency of a sample of coastal gillnet fishing business units by estimating a stochastic frontier analysis (SFA) and a data envelopment analysis (DEA) approaches and compares those estimates obtained from two approaches. The estimated mean productive efficiency by SFA is 77.6% and the mean productive efficiencies obtained for the VRS and CRS DEA are 75.9% and 45.7%, respectively. The joint use of SFA and DEA for estimating efficiency is also discussed.

• Advanced Composite Materials
• /
• v.16 no.3
• /
• pp.223-244
• /
• 2007

This study experimentally and numerically investigated the tensile damage progress in stitched laminates. In particular, it focused on the effects of stitching on the damage progress. First, we experimentally confirmed that ply cracks and delamination appeared under load regardless of stitching. We then performed damage-extension simulation for stitched laminates using a layer-wise finite element model with stitch threads as beam elements, in which the damage (ply cracks and delamination) was represented by cohesive elements. A detailed comparison between observation and the simulated results confirmed that stitching had little effect on the onset and accumulation of ply cracks. Furthermore, we demonstrated that the stitch threads significantly suppressed the extension of the delamination.

• The Journal of Fisheries Business Administration
• /
• v.43 no.2
• /
• pp.67-77
• /
• 2012

Based on the survey on aquaculture management status in Nohwa-eup, Bogil-myeon, Wando-eup in Wando region, this study aimed to estimate productive efficiencies of abalone aquaculture production using a stochastic frontier approach (SFA) and to find out their determinants. In the analysis, a Cobb-Douglas production function with an inefficiency term that follows an halfnormal distribution was assumed for the estimation of productive efficiencies. Then, based on the outcomes of productive efficiencies, determinants of productive efficiency were investigated using a tobit regression model. Results showed that the average inefficiency was estimated to be 10% and the production size would be a statistically significant variable for the production. In addition, it was shown that the cage installing method would be an important factor affecting to the level of productive efficiency.

• Asia-Pacific Journal of Business
• /
• v.7 no.1
• /
• pp.31-42
• /
• 2016

Small and Medium Enterprises (SMEs) are suitable to provide employment with lower investment in densely populated countries like Bangladesh. A stochastic frontier model is used to evaluate performance of SME Banking of the commercial banks in Bangladesh. Input (Total Deposit, Cost of Fund and Salary Expenditure) and output (Finance to SME) data are collected on 45 banks which are dealt with SME for 13 quarters from $1^{st}$quarter of 2010 to $2^{nd}$quarter of 2013. Average performance of the SME banking is 0.716 in Bangladesh. That is, banks have opportunity to increase 30% performance in SME banking from the same inputs. Bangladesh Development Bank has lowest performance (0.540) while Eastern bank has the highest performance (0.753). Highest (0.743) and lowest (0.662) performance is observed during the second quarter of 2013 and fourth quarter of 2010 respectively. Inefficient Bank might be benefited by following the rules of efficient banks.