• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.175-181
• /
• 2005

스컬용융법에 의해 루틸 단결정들을 성장시켰으며, 서로 다른 융액의 유지시간에 따른 ingot의 특성을 비교하였다. 스컬용융법은 교류전자기장(RF)에 의해 전기가 흐르는 융액의 직접유도가열에 근거하며, 가열은 RF 에너지의 흡수로 실행된다. $TiO_2$는 상온에서는 부도체이지만 온도가 올라갈수록 전기 전도성이 증가한다. 따라서, 초기 RF 유도가열을 위해 티타늄 금속 링(외경 : 6cm, 내경 : 4cm, 두께 : 0.2cm)을 $TiO_2$ 분말(아나타제상, CERAC, 3N)내부에 묻었다. 스컬용융법에 의한 산화물 용융에서 매우 중요한 것은 융점에서의 전기 저항 값, RF generator의 주파수 그리고 냉각도가니 크기이다. 본 연구에서는, $TiO_2$의 융점에서의 전기저항$(10^{-2}\~10^{-1}\;{\Omega}{\cdot}m)$은 알루미나$(10^{-1}\;{\Omega}{\cdot}m)$의 지르코니아$(10^{-3}\;{\Omega}{\cdot}m)$의 전기저항 데이터를 바탕으로 추정하였다. 냉각도가니의 내부직경은 11cm, 높이는 14cm였으며, 이것은 침투깊이$(0.36\~1.13cm)$와 RF generator 주파수를 고려하여 결정하였다

• 한국표면공학회지
• /
• 제42권5호
• /
• pp.216-219
• /
• 2009

A surface acoustic wave (SAW) filter structure was fabricated employing $4{\mu}m$ thick nanocrystalline diamond (NCD) and $2.2{\mu}m$ thick ZnO films on Si wafer. The NCD film was deposited in an $Ar/CH_4$ gas mixture by microwave plasma chemical vapor deposition method. The ZnO film was formed over the NCD film in an RF magnetron sputter using ZnO target and $Ar/O_2$ gas. On the top of the two layers, copper film was deposited by the RF sputter and inter digital transducer (IDT) electrode pattern (line/space : $1.5/1.5{\mu}m$) was defined by the photolithography including a lift-off etching process. The fabricated SAW filter exhibited the center frequency of 1.66 GHz and the phase velocity of 9,960 m/s, which demonstrated that a giga Hertz SAW filter can be realized by utilizing the nanocrystalline diamond thin film.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 추계학술대회
• /
• pp.63-66
• /
• 2010

본 논문은 차세데 3D-TV 방송을 위해 수정된 ATSC (Modified Advanced Television Systems Committee) 시스템 [1]에서 파일럿 (Pilot)을 이용한 채널 추정 대신, PN 시퀀스 (Pseudo-Noise Sequence)를 이용한 채널 추정 방식의 문제점에 대하여 2가지 방법으로 연구하였다. PN 시퀀스를 이용하여 채널을 추정하는 TDS-OFDM (Time Domain Synchronous - Orthogonal Frequency Division Multiplexing)시스템은 QAM (Quadrature Amplitude Modulation) 변조 방식을 사용하기 때문에 수신측 PN 시퀀스의 위상 변화가 일어나지 않는다. 하지만 수정된 ATSC 시스템에서 사용하는 VSB (Vestigial Side Band)변조 방식에서 직교위상 (Quadrature) 채널을 통해 전송되는 값은 동위상 (In-Phase) 채널을 통해 전송되는 값의 단순한 힐버트 변환 (Hilbert Transform)에 의해 생성되어 불규칙한 위상 변화가 발생한다. 따라서 수정된 ATSC 시스템에서 채널 추정을 위해 PN 시퀀스를 사용하게 된다면 상관 (Correlation) 특성을 잃어버릴 것이며 올바른 채널 임펄스 응답 (Channel Impulse Response)을 얻을 수 없다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.90-95
• /
• 2003

The present paper is to investigate the phase stability and soft magnetic properties of amorphous CoNbZr films when Pd is added as a substitution for CoNbZr alloys. The films were prepared by a RF magnetron sputtering method. The CoNbZrPd films deposited on Si wafers exhibited amorphous structures being independent upon the amount of Pd added in the films. On the addition of 4.34% Pd, the excellent soft magnetic characteristics of the films were observed with a coercive force of 0.54 Oe and an anisotropy field of 11 Oe, whereas a coercive force of 1 Oe and an anisotropy field of 3.5 Oe were shown in the film without the addition of Pd. The increased anisotropy field and low coercive force of the films may be attributed to the occupancy of Pd in the preferred sites parallel to the external magnetic field applied on the deposition process. A permeability of about 1100 was kept constant in the operation frequency ranging up to 100 MHz, which can be explained by the Landau-Lifshitz formula.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.603-605
• /
• 1996

The SLIM used in the conveyance system has been generally developed the controller based on the slip frequency control and the VVVF method to obtain the quick response for the position control signal. This paper deals with the trust control of the SLIM by vector control with Bang-Bang condition. Also, the control system is composed of the PI controller for soft start of the SLIM and the q-axis current controller for correction in phase with Space Vector for reducing the harmonic pulsation in low speed. The processing for vector control and robust dynamic breaking control is carried out by MC80196KC micro processor and IGBT module. The proposed scheme is verified through the computer simulation and experiments for the 10KW SLIM.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.429-434
• /
• 2002

The Synthetic Aperture Radar (SAR) data are considered to contain the greatest amount of information among various microwave techniques developed for measuring ocean variables from aircraft or satellites. They have the potential of measuring wavelength, wave direction and wave height of the ocean waves. But, it is difficult to retrieve significant ocean wave heights and surface current from conventional SAR data, since the imaging mechanism of ocean waves by a SAR is determined by the three basic modulation processes arise through the tilt modulation, hydrodynamic modulation and velocity bunching which are poorly known functions. Along-Track Interferometric (ATI) SAR systems can directly detect the Doppler shift associated with each pixel of a SAR image and have been used to estimate wave fields and surface currents. However, the Doppler shift is not simply proportional to the component of the mean surface current. It includes also contributions associated with the phase velocity of the Brags waves and orbital motions of all ocean waves that are longer than Brags waves. In this paper, we have developed a new method for extracting the surface current vector using multiple-frequency (L- & C-band) ATI SAR data, and have generated surface wave height information.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.58-66
• /
• 1997

Ti alloys, with the advantageous tensile strength/density ratio and the chemical stability, have been used widely in the aerospace and chemical engineering industries and their usages are still expanding in various industrial areas. In the automotive industry, because of their superior merits of weight reduction and fuel saving, Ti alloys are expected to be used as various part materials including connecting rods, engine valves, springs and retainers, which are all subjected to the fatigue loads. In this study, using Ti-3A1-2.5V, the effects of temperature and microstructure change on fatigue crack propagation has been investigated. Five different microstructures were tested at the temperatures of room temperature, 20$0^{\circ}C$, 30$0^{\circ}C$ and 40$0^{\circ}C$ under the same frequency 20Hz. Some of the conclusions obtained are as follows: (1)Microstructurally, the morphology of less $\alpha$-phase and finer lamellar structure of $\alpha$ and $\beta$-Ti showed better registance to the fatigue crack propagation. (2)Fatigue crack growth rate increased with test temperature.

• 한국통신학회논문지
• /
• 제17권3호
• /
• pp.268-276
• /
• 1992

본 논문에서는 전파감측(감시 및 측정)이나 유니버셜 복조기의 개발을 위한 기초 연구로써, 미지의 디지털 변조 신호 식별에 대하여 논의한다. 제안한 식별 방법은 시간 영역의 파라미터를 이용하는 방안으로 먼저 포락선, 순시 주파수, 차위상 정보를 기본특징으로 추출한다. 추출된 기본특징은 식별을 위해 2개의 2차원 비선형 식별 공간으로 사상되며 입력 신호의 식별은 1차 선형식별함수를 이용해 이루어진다. 본 논문에서 제안한 방법의 타당성을 검증하기 위하여 가우스성 잡음 환경하에서 ASK-2, ASK-4, BPSK, QPSK, 8PSK, FSK, QAM 신호를 대상으로 특징추출과 식별과정을 모의실험한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 추계학술대회 논문집
• /
• pp.103-107
• /
• 2007

In doubly fed induction generators (DFIGs), control of rotor currents allows for adjustable speed operation, active, and reactive power control. This paper presents a DFIG control strategy that enhances the active and reactive power control with controllers that can compensate for the errors caused by current measurement path in the DFIG system. The errors can be divided into two categories: offset and scaling errors. These can induce the speed, active, and reactive power pulsations, which are one and two times the fundamental slip frequency in the DFIG. And these undesirable ripples can do the DFIG harm. In this paper, a new compensation algorithm is proposed. Therefore, the proposed algorithm has several advantages: to implement is easy; it require less computation time; it is robust with regard to the variation of the induction generator parameters. In this paper, a new algorithm is introduced by using the integral of phase currents to measure the current ripples of rotor-side converterin the DFIG system. The experiment results are shown the effectiveness of the proposed method.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1375-1386
• /
• 2016

To decouple the secondary saliencies in sensorless permanent magnet synchronous machine (PMSM) drives, a repetitive control (RC) in the angle domain is proposed. In this paper, the inductance model of a concentrated windings surface-mounted PMSM (cwSPMSM) with strong secondary saliencies is developed. Due to the secondary saliencies, the estimated position contains harmonic disturbances that are periodic relative to the angular position. Through a transformation from the time domain to the angle domain, these varying frequency disturbances can be treated as constant periodic disturbances. The proposed angle-domain RC is plugged into an existing phase-locked loop (PLL) and utilizes the error of the PLL to generate signals to suppress these periodic disturbances. A stability analysis and parameter design guidelines of the RC are addressed in detail. Finally, the proposed method is carried out on a cwSPMSM drive test-bench. The effectiveness and accuracy are verified by experimental results.