• Research in Community and Public Health Nursing
• /
• v.18 no.1
• /
• pp.14-22
• /
• 2007

Purpose: The purpose of this study was to investigate the experience of falls, the fear of falling and fall efficacy and identify the predictors of falls in the elderly at senior citizens' centers. Method: The subjects of this study were 106 elders who used senior citizens' centers in Chungcheongbuk-do, Korea. Data were collected from May to June, 2006 through a survey using a structured questionnaire. Result: Of the elderly sampled, 35.8% experienced falls during the last 1 year. Of falls experienced by the elderly, 53% occurred indoors, 47% outdoors, 15.8% in the bathroom or toilet. In addition, 57.8% of the elderly had injuries on the hip and waist related with falls. The fear of falling was higher in those with experience in falls than in those without. Factors affecting the elders' falls were age (OR=1.113, 95% CI=1.012-1.224), the number of chronic disease (OR=2.342, 95% CI=1.365-4.019) and the fear of falling (OR=4.279, 95% CI=1.901-9.634). The predictor of the frequency of falls was fall efficacy ($R^2=24.9$). Conclusion: As a result, it is essential to develop fall prevention programs based on the fear of falling, fall efficacy, chronic diseases and medication state. And in senior citizens' centers, fall prevention safety education should be activated as a health promotion program.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.29-35
• /
• 2020

The purpose of this study was to examine the effect that the affective factors of oral health in industrial workers would have on oral health behaviors and quality of oral health life. A survey was performed of 100 subjects selected from 5 industrial companies located in Chungcheongbuk-do through simple random sampling method from January 19 to 23, 2018, using the questionnaires. The data collected from the survey were analyzed with frequency analysis, independent t-test, and multiple regression analysis by using the SPSS 18.0 statistical program. The results showed that the affective factors of oral health had an influence on oral health behaviors and that the influence on quality of oral health life was greater when the oral health practice intention was stronger. Based on aforesaid results, effective oral health programs, conducive to bringing changes to the affective factors of oral health, would need to be developed in order to enhance oral health behaviors and quality of oral health life in industrial workers.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.476-480
• /
• 2009

A polymer composite electrolyte of a blend of poly(methyl methacrylate)(PMMA) and poly(ethylene oxide) (PEO) as a host polymer, the ethylene carbonate as a solvent, and $LiClO_4$ as a salt was studied. The crystallinity of the polymer electrolytes was evaluated using differential scanning calorimeter(DSC). The ionic conductivity of the polymer electrolytes was measured by frequency response analyzer(FRA) method. The effect of PEO/PMMA blend ratios on the ionic conduction in these electrolytes was investigated. The electrolyte films showed a phase separation due to immiscibility of the PMMA with the PEO. The PMMA-rich phase and the PEO-rich phase were produced during a film casting. The ionic conductivity of blend electrolyte was dependent on the content of PMMA and showed the highest value at 20 wt.%. However, when PMMA content exceeds 20 wt.%, the ionic conductivity was decreased due to the slow ionic transport through the PMMA-rich phase.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.147-152
• /
• 2007

Numerous non-destructive tests(NDT) to assess the safety of real structures have been developed. System identification(SI) techniques using dynamic responses and behaviors of structural systems become an outstanding issue of researchers. However the conventional SI techniques are identified to be non-practical to the complex and tall buildings, due to limitation of the availability of an accurate data that is magnitude or location of external loads. In most SI approaches, the information on input loading and output responses must be known. In many cases, measuring the input information may take most of the resources, and it is very difficult to accurately measure the input information during actual vibrations of practical importance, e.g., earthquakes, winds, micro seismic tremors, and mechanical vibration. However, the desirability and application potential of SI to real structures could be highly improved if an algorithm is available that can estimate structural parameters based on the response data alone without the input information. Thus a technique to estimate structural properties of building without input measurement data and using limited response is essential in structural health monitoring. In this study, shaking table tests on three-story plane frame steel structures were performed. Out-put only model analysis on the measured data was performed, and the dynamic properties were inverse analyzed using least square method in time domain. In results damage detection was performed in each member level, which was performed at story level in conventional SI techniques of frequency domain.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.879-885
• /
• 2008

A rotordynamic analysis was performed with a decant-type centrifuge, which is a kind of industrial centrifuge. The system is composed of screw rotor, bowl rotor, driving motors, gear box, and support rolling element bearings. These rotors have a rated speed of 4300 rpm, and were modeled utilizing a rotordynamic FE method for analysis, which was verified through 3-D FE analysis. Design goals are to achieve wide separation margins of lateral critical speeds, and favorable unbalance responses of the rotor in the operating range. Then, a complex analysis rotordynamic analysis of the system was carried out to evaluate its forward synchronous critical speeds and mode shapes, whirl natural frequencies, and unbalance responses under various balance grade. As a result of analysis, the rotordynamic analysis performed by separating a screw rotor and bowl rotor may cause an error in predicting critical speed of entire system. Therefore, the rotordynamic analysis of a coupled rotor combining a screw and bowl rotor must be performed in order to more accurately estimate dynamic characteristics of the decanter-type centrifuge as presented in this paper. Also, rolling element bearings with suitable stiffness should be selected to keep enough separation margin. In addition, in establishing balance grade of a screw and bowl rotor, ISO G2.5 balance grade is more recommended than ISO G6.3, in particular balancing correction of a screw rotor based on ISO G2.5 grade is strongly recommended.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.105-113
• /
• 2010

In this paper, a 1.485 Gbps video signal transmission system using the carrier frequency of 240 GHz band was designed and simulated. The sub-harmonic mixer based on Schottky barrier diode was simulated in the transmitter and receiver. Both of heterodyne and direct detection receivers were simulated for each performance analysis. The ASK modulation was used in the transmitter and the envelop detection method was used in the receiver. The transmitter simulation results showed that the RF output power was -11.4 dBm($73{\mu}W$), when the IF input power was -3 dBm(0.5 mW) at the LO power of 7 dBm(5 mW) in sub-harmonic mixer, which corresponds to SSB(Single Side Band) conversion loss of 8.4 dB. This value is similar to the conversion loss of 8.0 dB(SSB) of VDI's commercial model WR3.4SHM(220~325 GHz) at 240 GHz. The combined transmitter and receiver simulation results showed that the recovered signal waveforms were in good agreement to the transmitted 1.485 Gbps NRZ signal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.219-225
• /
• 2019

There is a problem with the existing method of selecting the difficulty levels of Hanja characters. Some Hanja characters selected by the existing methods are different from Sino-Korean words used in real life and it is impossible to know how many times the Hanja characters are used. To solve this problem, we measure the difficulty of Hanja characters using the multiple regression analysis with the frequency as the features. Based on the elementary textbooks, FWS and FHU are counted. A questionnaire is written using the two frequencies and stroke together to answer the appropriate timing of learning the Hanja characters and use them as target variables for regression. Use stepwise regression to select the appropriate features and perform multiple linear regression. The R² score of the model was 0.1105 and the RMSE was 0.1105.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.74-77
• /
• 2015

WiSee is by utilizing the frequency of Wi-Fi(802.11n/ac), a technique for performing the operation recognized by the user's gesture. Current motion recognition scheme are using a dedicated device (leaf motion, Kinekuto) and the recognition range is 30cm ~ 3.5m. also For recognition range increases the narrow recognition rate, there is inconvenience for maintaining a limited distance. But WiSee is used by Wi-Fi it is possible to anywhere motion recognition if available location. Permeability also has advantages as compared with the conventional recognition method. In this paper I take a look at the operation process and the recent trend of WiSee.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.486-494
• /
• 2012

In this paper, we proposes the three-phase embedded Z-source inverter consisting of the three embedded Z-source converters and it's the output voltage control method. Each embedded Z-source converter can produce the bipolar output capacitor voltages according to duty ratio D such as single-phase PWM inverter. The output AC voltage of the proposed system is obtained as the difference in the output capacitor voltages of each converter, and the L-C output filter is not required. Because the output AC voltage can be stepped up and down, the boost DC converter in the conventional two-stage inverter is unnecessary. To confirm the validity of the proposed system, PSIM simulation and a DSP based experiment were performed under the condition of the input DC voltage 38V, load $100{\Omega}$, and switching frequency 30kHz. Each converter is connected by Y-connection for three-phase loads. In case that the output phase voltage is the same $38V_{peak}$ as the input DC voltage and is the 1.5 times($57V_{peak}$), the simulation and experimental results ; capacitor voltages, output phase voltages, output line voltages, inductor currents, and switch voltages were verified and discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.862-876
• /
• 1991

In this theses, the procedure for finding the equivalent immittance of an n-line coupled structures is presented in terms of the normal mode parameters of the n-line coupled system. The above generalized equations can be applied to the various Coupled structures including directional couplers, DC blocks, bandpass/band elimination filters, and various other uniformly coupled filters. The design equations are based on a simplified TEM(Quasi TEM) mode. The obtained results and the definition of the scattering parameters for a general coupled line four port with arbitrary terminations are used to present the procedure to determine the optimum physical dimensions matching the given load impedances connected to input, output port. Multiple coupled rnicrostrip two-port with three lines circuit designed shows little discrepancy between the conventional method and this one. Four port with five lines were fabricated on teflon substrate($e$r=2.55) with its thickness h=l.588mm designed at the center frequency, 4 GHz. Their measured results are fairly close to the ones by computation.