• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.436-442
• /
• 2022

In this paper, the performance of the selective combining according to the channel selection decision method of frequency diversity is evaluated in the underwater frequency selective channel. The underwater acoustic channel in the shallow sea has a complex multipath characteristic by combining various environmental factors such as boundary surface reflection and sound wave refraction according to the water temperature layer. In particular, frequency selectivity due to multipath causes energy fluctuation in a communication channel, which reduces SNR (Signal to Noise Ratio) and deteriorates communication performance. In this paper, we applied the frequency diversity technique using multiple channels to secure the communication performance according to the frequency selectivity by multipath. For each channel, 4-FSK (Frequency Shift Keying) and selective combining were applied, the performance was evaluated by applying the maximum value, average value, and majority decision of the signal in order to decide the demodulation channel selection of the selective combining.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.471-476
• /
• 1996

In this study, the method to use the phase shift keying (PSK) communication technique in smart transmitter is presented. In nuclear applications. smart transmitters for various parameters are expected to improve the accuracy of measurement and to reduce the load of calibration work. The capability of communication in field level is the most important merit of the smart transmitter. The most popular method is using of digital and analog techniques simultaneously - transmitting measurements from the field at 4∼20mA while modulating the current to carry digital information in both directions over the same twisted pairs. Conventional smart transmitters use the frequency shift keying (FSK) method for digital communication. Generally, however, the FSK method has the speed limit at 1200 bps. Amount of information to transmit becomes increasing as the processing technique is improved. The PSK method is noticeable alternative for high speed digital communication, but it has non-zero DC component. In order to use the PSK method in the field transmission with smart transmitter, the method to remove the DC component is studied in this work.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.2
• /
• pp.194-200
• /
• 2003

In this paper, FSK(Frequency Shift Keying) demodulator which is widely used for FH-SS system is designed and the experimental results are analyzed. The performance of the ADPLL(All-digital Phase-Locked-Loop), which is the main part of the demodulator circuit, is analyzed by the computer program. Using Maxplus-II tool provided by altera. co., ltd, each part of the ADPLL is designed and all of them is integrated into EPM7064SLC44-10 chip. And the simulation results are compared with the characteristics of the implemented circuits for analysis. There is about 2${\mu}\textrm{s}$ difference in time constant of the PLL. This difference is not critical in the demodulator. And the experimental results show that the transmitted data is well demodulated when the phase difference between the FSK modulated signal and the reference signal is about 180 degree.

• ETRI Journal
• /
• v.9 no.3
• /
• pp.3-12
• /
• 1987

In this paper, a non-classical autocorrelation detector adopting a newly defined test statistic is introduced to solve the typical problem of detecting a narrowband signal transmitted over an additive white Gaussian noise (AWGN) channel. Error probability analyses are performed for a noncoherent frequency-shift-keying (FSK) system employing the proposed test-statistic. Through the histogram approach, the probability density functions of the test-statistics are plotted to explain the analysis model. All numerical results obtained indicate the limited improvement in error performance under the lower signal-to-noise ratio (SNR) and the use of higher number of samples per bit will finally provide the almost same confident potential of improvement in error rate as the system using matched filters (MFs) gives.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.270-279
• /
• 2014

The Viterbi decoding algorithm, which provides maximum - likelihood decoding, is currently considered the most widely used technique for the decoding of codes having a state description, including the class of linear error-correcting convolutional codes. Two classes of nonbinary convolutional codes are presented. Distance preserving mapping convolutional codes and M-ary convolutional codes are designed, respectively, from the distance-preserving mappings technique and the implementation of the conventional convolutional codes in Galois fields of order higher than two. We also investigated the performance of these codes when combined with a multiple frequency-shift keying (M-FSK) modulation scheme to correct narrowband interference (NBI) in power-line communications channel. Themodification of certain detectors of the M-FSK demodulator to refine the selection and the detection at the decoder is also presented. M-FSK detectors used in our simulations are discussed, and their chosen values are justified. Interesting and promising obtained results have shown a very strong link between the designed codes and the selected detector for M-FSK modulation. An important improvement in gain for certain values of the modified detectors was also observed. The paper also shows that the newly designed codes outperform the conventional convolutional codes in a NBI environment.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.460-462
• /
• 1995

ATS Systems is activated against the over-running and the crashes between trains. Up to now, ATS Systems have been constituted analog systems adopting the changed frequency method or amplitude modulation, which is impossible to give any essential informations. In this paper, it is dealt with. digital ATS Systems which are replaced the former ATS Systems in the advanced nation of railways. Especially, this paper shows the possibility of any developments for the digital ATS Systems by the experiment of digital ATS systems by Frequency Shift Keying method.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1132-1134
• /
• 2001

전력선통신 변조방식 중 FSK(Frequency Shift Keying)변조방식을 이용하여 컴퓨터와 RS232케이블로 전력선모뎀과 연결하여 컴퓨터의 데이터신호를 전력라인으로 직접 송신할 수 있게 하였으며, 수신부에서 데이터신호를 검출하여 가전기기의 전원을 ON/OFF 하였다.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.666-668
• /
• 2001

전력선통신 변조방식 중 FSK(Frequency Shift Keying) 변조방식을 이용하여 컴퓨터와 RS232 케이블로 전력선모뎀과 연결하여 컴퓨터의 데이터신호를 전력라인으로 직접 송신할 수 있게 하였으며, 수신부에서 데이터신호를 검출하여 가전기기의 전원을 ON/OFF하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1251-1258
• /
• 2002

The weather FAX machine is the one of necessary of safety navigation for ship. which is the machine which make the weather image by the receiving radio signal which is modulated using FSK method and transmitted on air by coast station. after Coast station scan the weather image and broadcast the image with black dot to 1500Hz and white dot to 2300Hz using FSK modulation. This paper implement weather fax machine using only general IBM-PC by software. By using IBM-PC we can make some good functions like print, edit, save etc. The modulated signal from SSB go into RS232C port via photo coupler not to give damage to PC. by using Timer Interrupt and RS232C serial interrupt, we can measure signal frequency and remake weather image. This paper use only IBM-PC with general SSB receiver which is widely spread on the ship. so this is very economic and possible to implement mutifunctions.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.423-429
• /
• 2007

Since the wireless smart card has played a main role in the identification security application for the building access; this research has its purpose to improve the performance of the smart card system and aims to offer more convenient to user. The contactless cards do not require insertion into a card reader and can work up to centimeters away from the reading device. To be able to cope with this performance the controlling of power consumption through the adaptive modulation and error control is needed. This paper addresses a forward error control (FEC) scheme with the adaptive Reed-Solomon code rate and an M-ary frequency shift keying (M-FSK) modulation scheme with the varying symbol size M over the link. The result of comparing energy efficiencies of adaptive error correction and adaptive modulation to other various static schemes shows to save over 50% of the energy consumption.