• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.58-59
• /
• 2011

Microstrip line on dielectric substrate depending on the type of its configuration can be applied to be antenna, communication filters, and resonators. When driving frequency is considered more than X-band, unnecessary signal leakage should be occurred because of flowing through the planar circuit at banding position. So leakage signal will affect other planar circuit, and then EMC problem has to be introduced. In this paper, the affection of banding planar circuit on dielectric substrate was investigated.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.4
• /
• pp.407-416
• /
• 1991

A turbogenertor without damper cage is divided into five regions according to compoding materials in the radial direcrion. And the electric and magnetic field of each region in the subsynchronous resonance (SSR) phenomena is analyzed in this paper. The analytical method is based on solving a boundary value problem involving a three-dimensional magnetic diffrsion equation and the basic function consists of the double Fourier series. And the electrical characteristics of the material and kthickness of the wedges inserted in slot of the region III, which is dependent on frequency, is to be investigated.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.60-66
• /
• 1996

Brushless DC(BLDC) motor have been increasingly used in machine tools and robotics applications due to the reliability and the efficiency. In control of BLDC motor, it is important to construct the controller which is robust to parameter variations and external disturbances. Variable structure controller(VSC) has been known as a powerful tool in robust control of time varying systems. In practical systems, however, VSC has a high frequency chattering which deteriorates system performances. In this paper, a binary controller(BC) which takes the form of VSC and MRAC combined is presented to solve this problem. BC consists of the primary loop controller and the external loop controller to change the gain of primary loop controller smoothly. So it can generate the continuous control input and is insensitive to parameter variations in the given domain. To confirm the validity, various investigations of control characteristics for various design parameters in a position control system of BLDC motor are carried out. (author). 11 refs., 18 figs., 1 tab.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.65-68
• /
• 2001

In the vector control methods of induction motor, the stator current is divided into the flux and torque component current. By controlling these components respectively, the methods control independently flux and torque as in the DC motor and improve the control effects. To apply the vector control methods, the position of the rotor current is identified. The indirect vector control use the parameters of the machine to identify the position of rotor flux. But due to the temperature rise during machine operation, the variation of rotor resistance degrades the vector control. To solve the problem, the q-axis is aligned to reference frame without phase difference by comparing the real flux component with the reference flux component. Then to compensate the slip, PI controller is used. The proposed method keeps a constant slip by compensating the gain of direct slip frequency when the rotor resistance of induction motor varies. To prove the validations of the proposed algorithm in the paper, computer simulations is executed.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.98-101
• /
• 2002

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300V/1kW with 5%${\sim}$30% white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with USN. which are connected to the spectrum analyzer respectively.

• Journal of Power Electronics
• /
• v.2 no.2
• /
• pp.88-94
• /
• 2002

The demand for protection of power electronic application has during the last couple of vears increased regarding the high-power IGBT modules. Even with an active protection, a high power IGBT still has a risk of exhibiting a violent rupture in the case of a fault if IGBT Fuses do not protect it. By introducing fuses into the circuit this will increase the circuit inductance and slight inductance over-voltage during the turn-off of the diode and the IGBT. It is therefore vital when using fuses that the added inductance is kept at a minimum. This paper discuss three issues regarding the IGBT Fuse protection of adding inductance of existing High-speed and new Typower Fuse protection. First, the problem of adding inductance of exiting High-speed and new Typower Fuse DC-link circuit is treated, second a short discussion of protection of the IGBT module is done, and finally, the impect of the high frwquency loading on the currying capability of the fuses is presented.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.18-21
• /
• 2003

In general it has been considered to be the difficult problem that we divide continuous speech into short interval with having identical phoneme quality. In this paper we used Gaussian Mixture Model (GMM) related to probability density to divide speech into phonemes, an initial, medial, and final sound. From them we peformed continuous speech recognition. Decision boundary of phonemes is determined by algorithm with maximum frequency in a short interval. Recognition process is performed by Continuous Hidden Markov Model(CHMM), and we compared it with another phoneme divided by eye-measurement. For the experiments result we confirmed that the method we presented is relatively superior in auto-segmentation in korean speech.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.81-84
• /
• 2000

Digital Halftoning convert a continuous-tone images to a binary images. Inverse halftoning addresses the problem of recovering a continuous image from a halftoned binary image. Simple low pass filtering can remove the high frequency noise but it also removes the edge information. Thus the edge information should be separated from the halftoning noise. As a result, the edge of result image is blurring. This paper present that we obtain continuous-tone-image which using Anisotropic diffusion filter. To reduce noise without blurring the edges of reconstructed image use edge map. The experimental results show that proposed method gives a higher PSNR and better subjective quality than conventional methods. As a result, the edge information of reconstructed image reduce blurring.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.922-924
• /
• 2005

최근 리더기가 RF를 이용하여 사물에 부착되어있는 전자태그를 인식하는 비접촉 기술인 RFID(Radio Frequency identification)기술을 대형 물류, 제조업 등에 확대 적용함에 따라 기업 공급망의 가시성이 높아지고 효율적인 관리가 이루어지고 있다. 하지만 RFID 태그가 널리 보급됨에 따라 태그간의 충돌문제가 대두되고 있다. 본 논문에서는 태그간의 충돌문제(Anti-collision problem)를 최소화 할 수 있는 알고리즘을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.523-525
• /
• 2005

RFID(Radio Frequency IDentification) 기술은 RF 신호를 이용하여 특정 물체에 부착되어진 태그를 일정 범위 이내에서 식별할 수 있는 자동인식기술이다. RFID 시스템 상용화 이전에 해결해야 할 중요한 문제 중 하나는 다수의 리더들 간의 충돌 문제이다. 이러한 문제점을 해결하기 위한 리더 충돌 방지 알고리즘들은 RFID 시스템의 효율성과 직접적인 연관이 있으며 아직 연구가 미비한 상태이다. 기존의 리더 충돌 방지 알고리즘 중 Colorwave 방식은 구현이 간단한 장점은 있으나, 시간 이용 효율 저하 및 태그 오동작이 발생하게 된다. 또한 경쟁 기반의 슬롯 할당 방식으로 인한 문제점을 가지고 있다. 본 논문에서는 RFID 리더 네트워크에 충돌 중재를 위한 매니저를 두어 리더 간의 충돌 발생을 방지함과 동시에 위의 문제점을 해결 할 수 있는 적응형 리더 네트워크 구조를 제시한다.