• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.707-716
• /
• 2013

Tire noise is divided into two parts. One is pattern noise the other one is road noise. Pattern noise primarily occurs in over 500 Hz frequency but road noise occurs mainly in low frequency. It is important to develop a technology to predict the pattern noise at the design stage. Prediction technology of pattern noise has been developed by using image processing. Shape of tire pattern is computed by using imaging signal processing. Its results are different with the measured one. Therefore, the prediction of actual measured pattern noise is valuable. In the signal processing theory is applied to calculate the impulse response for the measurement environment. This impulse response used for the prediction of pattern noise by convolving this impulse response by the results of image processing of tire pattern.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.198-205
• /
• 2005

Many precedent investigations hate been made for the reliable assessment of the insulation state of large power apparatus for which partial discharge detection is one of tile plausible way. In this work, experimental investigations have been carried out to make the comparison on the PD(partial discharge) pattern analysis related to the five different types of artificial defects such as SFMP (Single Free Moving Particle), MFMP (Multi Free Moving Particle), Void, CFP (Conductor-Fixed Protrusion), EP (Enclosure Protrusion). For each PD pattern, PD detection has been done by tee different types of PD sensors such as HFCT(High Frequency Current Transformer), AE(Acoustic Emission) and UHF(Ultra High Frequency). And, in addition, frequency spectrum by the UHF sensor has been also made for each defect respectively. As a result, it is observed that the possibility of obtaining PD pattern based on PRPD(Phase Resolved Partial Discharge) in connection with the defects tinder investigation is dependant on the type of the sensor while the spectrum analysis is always successful to be achieved for every defect. Therefore, it could be suggested that the nature of PD source can be identified more distinctively when the conventional PRPDA is combined with spectrum analysis.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.690-701
• /
• 2008

Fashion illustration as conversational pattern which is made up of human and daily story creates brand image and new cultural value in textile design. The purpose of this study is to analyze an expressive characteristics focused on human body in conversational pattern illustration. The method of this study was to analyze documentaries, fashion magazines and internet fashion web site. The results were as follows: The category of body expression was classified as the head, the bust, the whole body, and the others. Most of all, the head is higher frequency than any other part. The category of body type was classified as iconic reappearance and surreal fantasy. The former expressed gender images of woman and man in reality and showed high frequency of 90.41%. Above all, two types were to show the organic correlation between fashion illustration body and brand concept. The construction method of motif was classified as singleness of body, repetition of body, singleness of body and non-body mixed, and repetition of body and non-body mixed. The repetition of body showed low frequency and it was composed of regular repetition construction and irregular construction. The singleness of body and non-body mixed, showed the highest frequency and it was definitely to communicate fashion concept. In these days, conversational pattern illustration in modern fashion pattern strengthens brand identity and informs the fashion image as creative commercial art. And also, it satisfies cultural sensibility of consumer and categorizes public phenomenons in our times.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1335-1343
• /
• 1999

This paper presents concrete pattern recognition method to identify the strength of concrete by evidence accumulation with multiple parameters based on artificial intelligence techniques. At first, zero-crossing(ZCR), mean frequency(MEANF), median frequency(MEDF) and autoregressive model coefficient(ARC) are extracted as feature parameters from ultrasonic signal of concrete. Pattern recognition is carried out through the evidence accumulation procedure using distance measured with reference parameters. A fuzzy mapping function is designed to transform the distances for the application of the evidence accumulation method. Results are presented to support the feasibility of the suggested approach for concrete pattern recognition.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.64-67
• /
• 2009

Vibrational micro-forming of pyramidal shape patterns was conducted for an Al superplastic alloy, Al 5083 and a Zr-based bulk metallic glass, $Zr_{62}Cu_{17}Ni_{13}Al_8$. A vibrational micro-forming system was specially designed for generating vibrational load by combining a PZT actuator with a signal generator. Single crystal Si micro dies with wet-etched pyramidal patterns were used as master dies for vibrational micro-forming. The micro-formed pattern height was increasing with increasing the frequency of the vibrational load. In particular, the vibrationally-microformed pattern height was similar or even higher than the statically-microformed pattern height when the load frequency exceeded about 125 kHz. It was also observed that the crystal grains affect the surface quality of the microformed pattern and the distribution of the pattern height in the die cavity array.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.43-50
• /
• 2007

A range-frequency interference pattern is analyzed in the course of the propagation of ship noise in shallow water. It has been shown to exhibit striated bands of intensity maxima and minima in the spectrogram. The slope of the striations is an invariant of the modal interference and is described by a waveguide invariant parameter $\beta$. It turns out that this interference pattern is useful for identifying the physical properties of the waveguide such as seabed properties. In this article, the interference pattern is analyzed using image processing techniques to produce the distribution of the beta and the effects of sediment types and geoacoustic parameters on beta distribution are examined and characterized by moments of the distributions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.251-254
• /
• 2004

The aging diagnosis technique using partial discharge detection method detects partial discharge signals cause of power equipment failuer and able to forecast the aging state of insulation system through analysis algorithm, in this paper accumulates HFPD signal during constant scheduled cycles to build HFPD pattern and then analyzes HFPD pattern using statistical parameters and ${\Delta}F$ pattern. The 3D pattern is composed of detected signal frequency, amplitude and repeated number and the FRPDA(frequency resolved partial discharge analysis) technique is used in 3D pattern construction. The ${\Delta}F$ pattern shows variation characteristics of amplitude gradient of consecutive HFPD signal Pulses and able to classify discharge types-internal discharge, surface discharge and coronal discharge etc. Fractal mathematics applied to ${\Delta}F$ pattern quantification and neural networks is used in aging diagnostic algorithm.

• Journal of Nutrition and Health
• /
• 제21권4호
• /
• pp.223-231
• /
• 1988

This study was disigned to observe the pattern of food preference, desire, and intake frequency of children in Pusan area to establish basic data for school lunch program. The children in a public school with school lunch program in Pusan area, were asked the food preference, desire, and intake frequency of the 30 food items given on questinnarie. The subjects also recorded the food intake for 3 days with the mother's help. The results of this study are summarized as follows. 1) The total numbers of items taken per day per children were increased with advancing grades. The numbers were 27, 33 and food items for 2nd, 4th and 6th grade respectively. 2) The degree of preference, desire and intake frequency were also increased with higher grades for most given foods except cakes, seaweeds and beans. 3) Boys showed the higher intake frequency than girls for most food items. The girls, however, showed higher preference for cakes and cookies than boys. 4) There was a significant positive correlation between food preference and desire, however, a significant correlation was not found between preference and intake frequency, and between intake frequency and desire.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.47-55
• /
• 1996

A microwave incoherent imaging method for a conducting cyliner by using multi-frequency tiem-harmonic field is presented in this study. In this paper, an incoherent intensity pattern of th econducting cylinder is obtained by averagin gout the multi-frequency intensities of the coherent field such as the time-harmonic field scattered from this cylinder. This phenomenon is hsown numerically in scattering by a conducting circular cylinder illuminated by the time-harmonic plane wave, and is interpreted analytically by the mutual coherence functon defined as a frequency-averaged intensity of the time-harmonic fields in th frequency domain.

• Journal of Communications and Networks
• /
• 제1권3호
• /
• pp.166-181
• /
• 1999

The object of this paper is to investigate the influence of antenna pattern on indoor radio channel characteristics. Different from previous works where this analysis was carried out at a fixed frequency using different antennas, in the present paper (where measurements were taken in a wide frequency range) the variation of the radiation pattern was caused by two factors: the change of the radiation pattern when the same antenna was used at different frequenicies and the use of different type of antennas. To carry out this analysis, frequency domain measurements of the indoor radio channel at 1 GHz, 5.5 GHz, 10 GHz and 18 GHz were collected. Measurements were taken using a network analyzer. Serveral re-alizations of the channel transfer function were obtained varying, for each measurement, the positon of the transmitter and keep-ing the receiver fixed. Estimate of the channel impulse response was obtained from the Inverse Fourier Transform (IFT) of the fre-quency response. The measurements were performed in an office enviroment with mostly metallic walls and inner separations. The obtained data were elaborated to obtain the power versus distance relationship, the Cummulative Distribution Functions(CDFs) of rms Delay Spread(DS) and of the 3 dB frequency correlation band-width. Finally, the 3 dB width of the frequency correlation func-tion has been empirically related to the inverse of the rms DS of the impulse response.