• KSTLE International Journal
• /
• v.5 no.1
• /
• pp.28-31
• /
• 2004

The object of the present work is the natural frequency analysis of subambient pressure tri-pad and pico sliders. Head/disk interaction during start/stop and constant speed were detected by using the acoustic emission (AE) test system. The frequency spectrum analysis is performed using the AE signal obtained during the head/disk interaction. The FFT (Fast Fourier Transform) analysis of the AE signals is used to understand the interaction between the AE signal and the state of contact. Natural frequency analysis was performed using the Ansys program. The results indicate acceptable accordance of finite element calculation results with the experimental results.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.213-216
• /
• 1996

In this research we would like to develop an exercise ECG signal analysis algorithm using the wavelet transform, which is possible to analyze the time and the frequency simultaneously. Wavelet transform has an advantage of dividing the nonstationary signals into the high frequency and low frequency band successively. Thus, it can separates the unnecessary noises from the frequency band of QRS complex and then using the selected frequency band we could detect the QRS complex and ST segment.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.218-220
• /
• 2004

A new wide-band VCO topology using Miller capacitance is proposed. Contrary to conventional VCO using the Miller capacitance where the variable amplifier gain is negative, the proposed VCO uses both the negative and positive variable amplifier gain to enhance the frequency tuning range significantly. The proposed VCO is simulated using HSPICE. The simulations show that 410MHz and 220MHz frequency tuning range are obtained using the negative .and positive variable amplifier gain, respectively. The tuning range of the proposed VCO is $23\%$ of the center frequency(2.8GHz). The phase noise is -104dBc/Hz at 1MHz offset by simple model. The operating current is only 3.84mA at 2.5V power supply.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.1
• /
• pp.22-26
• /
• 1967

The efficiency of frequency multiplier using nonlinear elements varies with the characteristics of the elements and also varies with the order of multiplication. And, if the elements is resistive, the efficiency varies with reverse-to-forward resistance value. Microwave energy which was frequency doubled by a nonlinear resistive element was obtained, and the theoretical efficiency of nonlinear reactive and resistive multiplier were compared with the efficiency taken by experiments. It was found that efficiency of frequency multiplier using the nonlinear resistive elements was increased, without depending on frequency, with the reverse-to-forward resistance value.

• Phonetics and Speech Sciences
• /
• v.9 no.1
• /
• pp.41-47
• /
• 2017

The main advantage of the statistical parametric speech synthesis is its flexibility in changing voice characteristics. A personalized text-to-speech(TTS) system can be implemented by combining a speech synthesis system and a voice transformation system, and it is widely used in many application areas. It is known that the fundamental frequency and the spectral envelope of speech signal can be independently modified to convert the voice characteristics. Also it is important to maintain naturalness of the transformed speech. In this paper, a speech synthesis system based on Hidden Markov Model(HMM-based speech synthesis, HTS) using the STRAIGHT vocoder is constructed and voice transformation is conducted by modifying the fundamental frequency and spectral envelope. The fundamental frequency is transformed in a scaling method, and the spectral envelope is transformed through frequency warping method to control the speaker's vocal tract length. In particular, this study proposes a voice transformation method using the correlation between fundamental frequency and vocal tract length. Subjective evaluations were conducted to assess preference and mean opinion scores(MOS) for naturalness of synthetic speech. Experimental results showed that the proposed voice transformation method achieved higher preference than baseline systems while maintaining the naturalness of the speech quality.

• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.47-52
• /
• 2010

In this paper, a frequency tripler has been designed with 100mW medium-power using P-HEMT. It is designed to obtain 7.2GHz frequency at the output that is an integer multiple of 2.4GHz input frequency by using nonlinear device that produces 3rd harmonic. The frequency tripler is designed by using load-pull simulation. To suppress the 2nd and fundamental, notch filter is used for the frequency tripler. The tripler is designed to obtain about 21dBm output power with 15dBm input, i.e., 6dB conversion gain and the suppression of 20dBc at fundamental, and 30dBc at the second harmonics.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.9
• /
• pp.17-24
• /
• 2017

Core citation recognition is to identify influential ones among the prior articles that a scholarly article cite. Previous approaches have employed citing-text occurrence information, textual similarities between citing and cited article, etc. This study proposes a term-based approach to core citation recognition, which exploits the importance of individual terms appearing in in-text citation to calculate influence-strength for each cited article. Term importance is computed using various frequency information such as term frequency(tf) in in-text citation, tf in the citing article, inverse sentence frequency in the citing article, inverse document frequency in a collection of articles. Experiments using a previous test set consisting of computational linguistics articles show that the term-based approach performs comparably with the previous approaches. The proposed technique could be easily extended by employing other term units such as n-grams and phrases, or by using new term-importance formulae.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2005

The common form of pre-emphasis filter is $H(z)\;=\;1\;- az^{-1}$, where a typically lies between 0.9 and 1.0 in voiced signal. Also, this value reflects the degree of filter and equals R(1)/R(0) in Auto-correlation method. This paper proposes a new flattening algorithm to compensate the weaked high frequency components that occur by vocal cord characteristic. We used interval information of LSP to estimate formant frequency. After obtaining the value of slope and inverse slope using linear interpolation among formant frequency, flattening process is followed. Experimental results show that the proposed algorithm flattened the weaked high frequency components effectively. That is, we could improve the flattened characteristics by using interval information of LSP as flattening factor at the process that compensates weaked high frequency components.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.107-111
• /
• 2005

It has been reviewed whether it would be suitable that the application of the time-frequency signal analysis techniques to estimate the location of the impact source in plate structure. The STFT(Short Time Fourier Transform), WVD(Wigner-Ville distribution) and CWT(Continuous Wavelet Transform) methods are introduced and the advantages and disadvantages of those methods are described by using a simulated signal component. The essential of the above proposed techniques is to separate the traveling waves in both time and frequency domains using the dispersion characteristics of the structural waves. These time-frequency methods are expected to be more useful than the conventional time domain analyses fer the impact localization problem on a plate type structure. Also it has been concluded that the smoothed WVD can give more reliable means than the other methodologies for the location estimation in a noisy environment.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.3
• /
• pp.38-46
• /
• 1996

The purpose of this study is to develop the miniaturized duplexer filter for mobile communications using high dielectric constant (${\varepsilon}$r > 100, 180) ceramic resonators. Duplexer filter was ocmposed of ceramic resonators which has been developed using BNT system and SCT system, respectively. Developed duplexer filter was formed to have Tx frequency band at 836.5 (($\pm$12.5)MHz and Rx frequency band at 881.5 ($\pm$12.5)MHz. Insertion loss at Tx frequency band was 1.41dB and 1.46dB, insertion loss at Rx frequency band was 3.49dB and 3.65dB, respectively. Especially, duplexer filters using dielectric cermaics with ${\varepsilon}$r = 180 were 8% smaller than commercially manufactured duplexer filters using dielectric ceramics with ${\varepsilon}$r = 90 by murata.