• 대한한의학방제학회지
• /
• 제25권3호
• /
• pp.413-427
• /
• 2017

Objectives : This report describes 75 studies related to the use of Zingiberis siccatum Rhizoma mainly blended from Dongeuibogam. Methods : The 75 Prescriptions of Consumptive part in DonguiBogam analysed frequency of basic prescriptions, symptoms of prescriptions and the pathology. Results : Prescriptions that Zingiberis siccatum Rhizoma was taken as a monarch drug are utilized for 25 therapeutic purposes, for example, cold disease, stool disease, cough disease. In particular, 16.0% of prescriptions appear in the chapter of cold. Prescriptions that utilize Zingiberis siccatum Rhizoma as the main component are used in the treatment of cold, stool and cough disease. Zingiberis siccatum Rhizoma is used in pathogenic factors such as weakness cold and cold strength and used in pathology related to the spleen and stomach system. The dosage of Zingiberis siccatum Rhizoma is 5pun(about 1.88g) to 4nyang(about 150.4g), however 1don(about 3.75g) has been taken the most for clinical application. Ijungtang is the most useful base prescriptions which use the Zingiberis siccatum Rhizoma as the main ingredient. Conclusions : As a result of Study on Analysis all Prescriptions of Zingiberis siccatum Rhizoma in DonguiBogam. We can understand more about basic prescriptions, symptoms of prescriptions and the pathology that are using for Zingiberis siccatum Rhizoma.

• 한국음향학회지
• /
• 제22권2호
• /
• pp.104-112
• /
• 2003

유체기계 덕트 내 음원은 흔히 선형 시불변 모델을 이용하여 음원 임피던스와 강도로 특성화되어진다. 그러나 내연기관 및 압축기 음원에 대한 여러 측정에서 물리적으로 타당하지 않은 부의 저항이 보고된 바 있다. 본 논문에서는 유체기계의 시변성이 음원특성에 미치는 영향에 대하여 해석적으로 연구하였다. 이를 위하여 왕복동 피스톤 및 배기계로 구성된 간단한 유체기계를 전형적인 주기적으로 시변하는 계로서 다루었으며 등가음향 회로를 해석하였다. 해석 해를 이용한 모사측정에서는 실제 음원의 시변성이 부의 저항에 대한 주요한 원인임을 볼 수 있다. 비교적 작은 시변항의 크기를 가지는 경우에 피스톤이 정적 계의 고유진동수의 두 배 또는 그 정수로 나뉜 주파수로 작동한다면 음원이 큰 음향 파워를 방사하게 됨을 알 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제8권1호
• /
• pp.5-10
• /
• 2007

Using a reference slurry, ammonium dodecyl sulfate (ADS), an anionic and environmentally friendly surfactant, was investigated as an alternative to BTA for its inhibition and lubrication characteristics. Results demonstrated that the inhibition efficiency of ADS was superior to that of BTA. Coefficient of friction (COF) was the lowest when the slurry contained ADS. This suggested that adsorbed ADS on the surface provided lubricating action thereby reducing the wear between the contacting surfaces. Temperature results were consistent with the COF and removal rate data. ADS showed the lowest temperature rise again confirming the softening effect of the adsorbed surfactant layer and less energy dissipation due to friction. Spectral analysis of shear force showed that increasing the pad-wafer sliding velocity at constant wafer pressure shifted the high frequency spectral peaks to lower frequencies while increasing the variance of the frictional force. Addition of ADS reduced the fluctuating component of the shear force and the extent of the pre-existing stick-slip phenomena caused by the kinematics of the process and collision event between pad asperities with the wafer. By contrast, in the case of BTA, there were no such observed benefits but instead undesirable effects were seen at some polishing conditions. This work underscored the importance of real-time force spectroscopy in elucidating the adsorption, lubrication and inhibition of additives in slurries in CMP.

• 한국해양공학회지
• /
• 제23권5호
• /
• pp.45-53
• /
• 2009

In this study, Finite Element Analysis (FEA) was used to decide three kinds of material property of vibration proof rubber with the unique characteristic of non-linear and large deformation. As well, three types of hardness (Hs 50, 55, 60) were compared with the result of fatigue tests, fatigue life was able to be predicted. The request for fatigue life becomes strict more and more as increasing stress under conditions like a compaction, high load and high temperature for parts because it is main characteristics of rubber mount for automotive. Regarding to the fatigue life under dynamic deformation condition, it can be predicted as checking forced deformation extends and its frequency and its strain-life curve. As for material property tests of uniaxial tension test, uniaxial compression test, pure shear test, Ogden model was used for FEA by observing relations between stress and strain's rate as curve fitting. As a result of FEA, fatigue life for rubber mount was predicted and accorded well with the experimental data of fatigue test with hourglass specimens. In addition, its property of the predictable fatigue life method suggested in this study was accorded well with the experimental data by comparing the predicted fatigue life of FEA with the result of fatigue test for rubber component of engine rubber mount.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.26-35
• /
• 2007

The vehicle of urban transit is a complex system that consists of various electric, electronic, and mechanical equipments, and the maintenance cost of this complex and large-scale system generally occupies sixty percent of the LCC (Life Cycle Cost). For reasonable establishing of maintenance strategies, safety security and cost limitation must be considered at the same time. The concept of system reliability has been introduced and optimized as the key of reasonable maintenance strategies. For optimization, three preceding studies were accomplished; standardizing a maintenance classification, constructing RBD (Reliability Block Diagram) of VVVF (Variable Voltage Variable Frequency) urban transit, and developing a web based reliability evaluation system. Historical maintenance data in terms of reliability index can be derived from the web based reliability evaluation system. In this paper, we propose applying inverse problem analysis method and hybrid neuro-genetic algorithm to system reliability optimization for using historical maintenance data in database of web based system. Feed-forward multi-layer neural networks trained by back propagation are used to find out the relationship between several component reliability (input) and system reliability (output) of structural system. The inverse problem can be formulated by using neural network. One of the neural network training algorithms, the back propagation algorithm, can attain stable and quick convergence during training process. Genetic algorithm is used to find the minimum square error.

• 농업과학연구
• /
• 제40권4호
• /
• pp.395-403
• /
• 2013

Plant factory has drawn attention in many countries in the world due to capability of environmental control not only for better yield and quality, but also for increase in functional and medicinal components of the products. In this paper, an experimental plant factory was constructed for various tests under different environmental conditions, and the operations were evaluated. A production room was constructed with adiabatic materials with dimensions of $6,900{\times}3,000{\times}2,500$ mm ($L{\times}W{\times}H$). Four sets of $2,890{\times}600{\times}2,320$ mm ($L{\times}W{\times}H$) production frame unit, each with 9 light-installed beds and an aeroponic fertigation system, resulting in 36 beds, were prepared. Accuracy and response were evaluated for each environmental control component with and without crops. Air temperature, humidity, $CO_2$ concentration, light intensity, frequency, and duty ratio, fertigation rate and scheduling were controllable from a main control computer through wireless communication devices. When the plant factory was operated without crop condition, the response times were 8 minutes for change in temperature from 20 to $15^{\circ}C$ and 20 minutes from 15 to $20^{\circ}C$; 7 minutes for change in humidity from 40 to 65%; and 4 minutes for change in $CO_2$ concentration from 450 to 1000 ppm. When operated for 24 hours with crop cultivation; average, maximum, and minimum values of temperatures were 20.06, 20.8, and $18.8^{\circ}C$; humidity were 66.72, 69.37, and 63.73%; $CO_2$ concentrations were 1017, 1168, and 911 ppm, respectively. Photosynthetic Photon Flux Density was increased as the distance from the light source decreased, but variability was greater at shorter distances. Results of the study would provide useful information for efficient application of the plant factory and to investigate the optimum environment for crop growth through various experiments.

• 한국컴퓨터정보학회논문지
• /
• 제16권10호
• /
• pp.175-183
• /
• 2011

디지털 비디오 워터마킹의 성능은 디지털 비디오에서 많은 정보를 은닉하는 방법에 대한 평가이다. 그러므로 디지털 컨텐츠에 대한 주파수 영역의 고화질의 동영상에 많은 비트의 데이터를 저장하는 방법이 요구되고 있다. 따라서 본 논문은 워터마크 요소 중 강인성과 비시각성 사이의 절충을 통해서 동영상의 프레임에 대해 휘도 성분을 추출한 후 웨이블릿 변환을 수행하여 LH와 HL 부대역에 워터마크를 내장하고 비시각적인 워터마크 기반의 강인한 워터마크를 통해 향상된 워터마크의 보안성을 위한 워터마크 시스템을 설계한다. 워터마크의 보안성에 대한 성능의 분석은 통계적인 방법을 사용하여 비시각적인 워터마킹에서의 다양한 공격에 대한 강인성을 평가한다. 실험 결과에 따르면 노이즈 추가, 손실 압축, Low-Pass 필터링과 같은 일반적인 신호 처리를 수행하여 워터마크 강인성과 비시 각성을 평가하였고, 다양한 공격에 대한 워터마크의 보안성을 검증할 수 있었다.

• 대한전자공학회논문지SD
• /
• 제40권6호
• /
• pp.400-407
• /
• 2003

본 논문에서는 전통적인 JTC와는 달리 입력평면을 주파수 영역으로 사용해서 JTC의 자기상관성분을 이용하여 원 영상을 재생할 수 있는 광 암호화 시스템을 제안하였다. 제안한 시스템은 푸리에변환과 역변환의 두 가지 처리과정을 거치지 않고 한 번의 푸리에 변환 과정을 거치는 구조로 JTC를 사용하기 때문에 출력 평면에 나타나는 위상성분의 영향을 고려해야 한다. 따라서 본 논문에서는 결합입력평면의 구조에 따른 위상성분의 영향을 분석하고 해결책을 제시하였다. 원 영상은 무작위 위상영상과 곱해져 수치적인 방법으로 암호화되며 복소함수 값을 가지므로 기존의 광 보안 시스템이 가지는 장점을 그대로 가진다. 또한 한 번의 푸리에 변환만을 이용하고 JTC의 가장 큰 문제점인 자기상관성분을 이용하여 원 영상을 재생하므로 JTC를 이용한 실시간 처리에 보다 적합하다. 컴퓨터 모의실험과 광 실험을 통하여 분석의 타당성을 확인하고 제안한 암호화 시스템의 성능을 확인하였다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.315-327
• /
• 2017

In this paper, we present a method for estimating of position and velocity of a moving target by using the range and the bearing measurements from multiple sensors of aiming unit. In many cases, conventional low cost gyro sensor and a portable laser range finder(LRF) degrade the accuracy of estimation. To enhance these problems, we propose two methods. The first is background image tracking and the other is principal component analysis (PCA). The background tracking is used to assist the low cost gyro censor. And the PCA is used to cope with the problems of a portable LRF. In this paper, we prove that our method is robust with respect to low-frequency, biased and noisy inputs. We also present a comparison between our method and the extended Kalman filter(EKF).

• 한국항공우주학회지
• /
• 제40권4호
• /
• pp.292-299
• /
• 2012

칼만 필터를 이용하여 RF 탐색기의 시선각 변화율 추정을 수행하였다. 김발형 탐색기의 모델링을 기반으로 칼만필터를 설계하였다. 필터 설계 시 주요한 인자인 공정 잡음 및 측정 잡음의 특성에 대해 살펴보았으며, RF 탐색기의 신호 특성에 맞는 측정 잡음치를 선정하여 필터링을 수행하였다. 측정 잡음관리를 위해 SNR 및 관련 신호를 이용하였으며, 공정 잡음에 따른 필터의 민감도 확인을 위해 대수적 방식을 사용하였다. 일식 등으로 탐색기 신호가 없는 경우 선형 해석을 통해 필터의 안정도를 분석하였다. 수치 시뮬레이션을 통해 제안된 시선각 변화율 추정기법의 타당성을 검토하였다.