• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• 지구물리와물리탐사
• /
• 제6권3호
• /
• pp.119-125
• /
• 2003

소형루프 전자탐사법은 다양한 현장에 성공적으로 적용되어온 효과적인 물리탐사법으로 특히 천부 지반조사나 환경오염대의 조사에 널리 사용되고 있다. 일반적으로 저유도상수(low induction number)대역에서 수행되는 소형루프 전자탐사에서는 주로 기하학적 수직탐사(geometric sounding)이 사용되어 왔으나, 근자에 이르러 정확한 2차장의 측정이 가능한 일체형의 다중 주파수 소형루프 전자탐사장비가 개발되면서, 주파수 수직탐사(frequency sounding)이 시도되고 있다. 본 논문에서는 간단한 2층구조에 대하여 수평루프 전자탐사 모델링을 수행하였다. 분석 결과 동상성분의 경우에는 주파수 수직탐사이 가능하지만, 이상성분의 경우에는 기하학적 수직탐사가 효과적인 것으로 확인되었다. 그러나 동상성분의 경우 신호의 크기가 이상성분에 비하여 미약하므로 국내에서와 같이 전기전도도가 낮고 전자기적 잡음 수준이 높은 지역에서는 적용이 곤란하다. 따라서 본 논문에서는 이상성분이 신호의 크기가 커 안정적 자료획득이 가능하며, 두 개의 주파수에 측정된 이상성분의 차가 동상성분과 같은 거동특성을 보인다는 점에 착안하여, 기존의 방법과는 다른 주파수 수직탐사 방법을 제시하고자 하였다. 또한 지하의 전기전도도를 비교적 잘 반영하는 겉보기 전도도를 정의하였다.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.220-223
• /
• 2011

Respiration signal of the vital signs is an important parameter in clinical parts. To extract the respiration signal from PPG signal for mobile healthcare system is difficult because the bands of the motion artifacts and respiration in the frequency domain are overlapped. This study to improve this problem suggested a respiration extraction method using the independent component analysis and evaluated its performances. In results of evaluation, the ICA method showed better performance than LPF suggested recently.

• 한국방재학회 논문집
• /
• 제10권3호
• /
• pp.119-131
• /
• 2010

가뭄은 인간이 극복하기 힘든 자연재해로서 가뭄지역의 경제를 어렵게 할 뿐 아니라 생태계까지 파괴하기 때문에 전 세계적으로 가장 두려워하는 관심 재해 중 하나이다. 따라서 본 연구에서는 대표적인 가뭄지수인 팔머가뭄지수와 범지구적 해수면 온도의 상관관계를 분석하였다. 먼저 팔머가뭄지수를 산정하여 과거 가뭄발생연도와 비교분석을 실시하였다. 비교분석을 결과 대부분의 과거 가뭄사상과 지수가 일치하는 것으로 분석되었다. 상관성 분석을 위해 팔머가뭄지수 산정을 위한 지수인 강수자료와 온도자료를 월평균강수량과 월평균온도 자료로 산정하여 군집분석을 실시하였다. 우리나라 기상청관할에 있는 61개 지점을 선정하여 월평균강우량과 월평균온도 자료로 군집분석결과 총 6개의 군집을 형성하는 것으로 분석되었다. 또한, 군집분석결과와 팔머가뭄지수의 주성분 분석을 실시하였다. 주성분 분석을 통해 전체 자료의 분산을 80% 이상 설명할 수 있는 14개의 시계열 자료를 추출하였다. 추출된 팔머가뭄지수의 주요 성분과 범지구적 해수면 온도와의 상관성 분석결과 팔머가뭄지수는 양의 상관관계가 음의 상관관계보다 큰 것으로 분석되었으며, 태평양에서 관측되는 해수면 온도와 통계적으로 유의한 상관관계를 갖는 해수면 온도 구역을 확인할 수 있었다. 이를 통해 해수면 온도를 이용하여 우리나라에 발생할 수 있는 가뭄의 예측 가능성을 제시하였다.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.475-480
• /
• 2021

The purpose of this study is to obtain the natural frequency of fuel supply pipes for vehicle engines through modal analysis and testing and compare the resulting values to ensure the reliability of the analysis. In other words, in this study, we obtain the unique frequency of the fuel pipe of the vehicle engine through analysis and testing and compare its results. Comparing the natural frequency obtained through analysis and testing, the first and third vibration modes obtained accurate natural frequency results of less than 1% and very similar results of less than 5% maximum error over the fourth vibration modes. These results are determined that if design changes of fuel pipes are made depending on the vehicle in the future, there will be no problem in obtaining the natural frequency of pipes that have been changed by analysis. Through future analysis and testing, durability and stability evaluation of connections of fuel supply pipes for vehicle engines will be carried out.

• 전력전자학회논문지
• /
• 제18권2호
• /
• pp.178-183
• /
• 2013

The study of lightning surge have been conducted on information and communications equipment and power system. However, the research on SMPS itself is an inactive field. This paper analyzes surge current path of flyback converter with the combination wave generator by lightning surge. Also, this paper discloses that there exists the surge current with high-frequency component besides the low-frequency component based on the standard surge current. This high-frequency surge current is the major reason to damage the semiconductor devices such as FET and IC. To confirm the validity of the proposed issue, the analysis and experimental results are presented.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1093-1098
• /
• 2017

액체로켓엔진용 산화제펌프의 캐비테이션 시험 중 입출구 배관과 펌프 케이싱에서 계측된 고주파 신호를 분석하였다. 각각의 데이터의 RMS 값을 캐비테이션 수에 따라 표현하였다. 회전수 동기 주파수와 날개 개수 성분, 캐비테이션 불안정성 주파수의 RMS를 계산하였다. 입구 배관의 압력섭동은 캐비테이션 불안정성의 영향을 받았다. 출구 배관의 경우 3x 성분이 탁월하였는데, 인듀서에서 발생한 3x 성분이 임펠러에서 증폭된 결과로 해석된다. 케이싱에 부착된 가속도계에서도 캐비테이션 불안정성에 해당하는 주파수가 확인되었다.

• 가정과삶의질연구
• /
• 제10권2호
• /
• pp.163-178
• /
• 1992

This study is focused on causual relationship analysis among the components of family resource management system based on a theory of Deacon and Firebaugh. The system of family resource management is consisted for the component of input like on objective resource and level of resource perception, the component of throughput like a behavior pattern of the family resource management, and the component of output like a degree of the family life satisfaction. The instrument for resource perception level, behavior pattern of family resource management and degree of life satisfaction were developed for this study, and main investigation was executed through 1st and 2nd pre-test. The 800 questionnaire were distributed by cluster sampling to the homemakers in Seoul. The final data used in this study were 703, and analyzed by Cronback's coefficient, factor analysis. frequency. percentage, regression analysis and path analysis, and teated with SAS PC+. Consequently , the findings of this study were accepted hypothesis I, II, II, IV.

• 한국전기전자재료학회논문지
• /
• 제35권6호
• /
• pp.568-575
• /
• 2022

This paper is a study on frequency analysis and electronic noise reduction of energy storage system (ESS). We acquired 4 necessary data for about 2 minutes and 4 seconds using a sampling frequency of 10,000 Hz in ESS. Fast Fourier transform (FFT) was used for electronic noise analysis from the acquired data. As a result, it was confirmed that DC component, fundamental wave, second and higher harmonic component exist. For the attenuation of harmonics, low-pass filter (LPF) was applied. We confirmed that an attenuation of approximately 59.3% appears from the second harmonic. The presence of many harmonic components in the data of the ESS was expected to occur due to the insufficiency of optimization among the modules inside the ESS. Therefore, we propose that a national certification system for ESS should be introduced to settle down the issue properly.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.65-74
• /
• 1994

Various substructure synthesis methods, such as component mode synthesis, building block analysis and reduced impedance method, are studied for the determination of vibration characteristics of plate problems. Comparisons are made for each methods in terms of accuracy and computational efficiency. Following conclusions are made from the results of computer simulations and experiments. i) The computation time of component mode synthesis is much shorter than that of whole structure analysis. The natural frequencies of lower modes obtained from component mode synthesis are almost same as those obtained from whole structure analysis, but in higher modes the differences between those two methods are increases. ii) The transfer function obtained from building block analysis is same as that obtained from the finite element method. iii) Same transfer functions can be obtained by the reduced impedance method. The computation time of reduced impedance mathod is shorter that that of general finite element method, but for the solutions in broad frequency band it requires long calculation time.