• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.32-32
• /
• 2008

Microstructure and positive temperature coefficient of resistivity (PTCR) characteristics of $0.9BaTiO_3-0.1(Bi_{0.5}Na_{0.5})TiO_3$ [BaBiNT] ceramics doped with $Nb_2O_5$ were investigated in order to develop the Pb-free high Curie temperature ($T_c$)(>$160^{\circ}C$) PTC thermistor. The BaBiNT ceramics showed a tetragonal perovskite structure, irrespective of the added amount of $Nb_2O_5$. They also have a homogeneous microstructure. The resistivity of BaBiNT ceramics was gradually decreased by doping $Nb_2O_5$, which might be due to $Nb^{+5}$ ions substituting for $Ti^{+4}$ sites. The PTCR characteristics of BaBiNT ceramics appeared when the amount of doped $Nb_2O_5$ exceeded 0.0025mol%. Moreover, the abrupt grain growth was observed for the 0.03mol% $Nb_2O_5$added BaBiNT ceramics. It showed an especially high $T_c$ of approximately $172^{\circ}C$ and good PTCR characteristics of a high $\rho_{max}/\rho_{min}$ ratio ($2.96\times10^3$), a high resistivity temperature factor (11.40/$^{\circ}C$) along with a relatively low resistivity ($3.5\times10^4\Omega{\cdot}cm$).

• Korean Journal of Logic
• /
• v.16 no.3
• /
• pp.437-452
• /
• 2013

This paper verifies the following two: First, I verify the standard completeness proof for the system $ULw_t$ is not correct in the sense that t-weakening uninorms are t-norms, but not weakening-free uninorms. Second, I verify that the proof for $ULw_t$ can be used for the system MTL. That is, I provide a new standard completeness proof for it.

• Journal of applied mathematics & informatics
• /
• v.40 no.3_4
• /
• pp.709-717
• /
• 2022

The objective of this research is to prove that an additive mapping T : R → R is a left as well as right centralizer on R if it satisfies any one of the following identities: (i) T(xⁿyⁿ + yⁿxⁿ) = T(xⁿ)yⁿ + yⁿT(xⁿ) (ii) 2T(xⁿyⁿ) = T(xⁿ)yⁿ + yⁿT(xⁿ) for each x, y ∈ R, where n ≥ 1 is a fixed integer and R is any n!-torsion free semiprime ring. In addition, we talk over above identities in the setting of *-ring(ring with involution).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.225-231
• /
• 2023

This study was carried out to investigate the growth characteristics, yield and chemical compositions of whole crop barley (Hordeum vulgare L.) according to mixing ratio of chemical fertilizer (CF) and liquid swine manure (LSM) in the paddy field cultivation. The experimental design was arranged in a randomized block design with five treatments and three replications. The manure fertilizer ratio of five treatments were CF 100% (T1), CF 70% + LSM 30% (T2), CF 50% + LSM 50% (T3), CF 30% + LSM 70% (T4), and LSM 100% (T5) of whole crop barley. At this time, the application of liquid swine manure was based solely on the nitrogen. Plant length was higher at T1 as compared to other treatments (T2, T3, T4 and T5). Fresh yield, dry matter yield and total digestive nutrients (TDN) yield were the highest in T1, whereas the lowest in T5 treatment (p<0.05). Chemical compositions (crude protein, crude fat, neutral detergent fiber, acid detergent fiber and TDN) did not show significant difference among treatments. Ca and Na contents were significantly lower at T1 as compared to other treatments (T2, T3, T4 and T5). However, Mg and P contents were significantly higher at T1 as compared to other treatments(p<0.05). There was no significant difference in total free sugar content among T2, T3, T4 and T5 treatments, but the chemical fertilizer (T1) was significantly lower than the other treatments (p<0.01). Considering the above results, liquid swine manure application showed lower dry matter yield and TDN yield than chemical fertilizer, but higher free sugar content. Therefore, in order to increase the productivity of whole crop barley, it is considered desirable to mix liquid fertilizer with chemical fertilizer, taking into account the decomposition rate and insufficient components (P, K) of the liquid swine manure.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1342-1348
• /
• 2014

Seeds of Korean pine cone (Pinus koraiensis) have long been consumed as an edible food in countries located in North-East Asia, On the other hand, Korean pine cone, containing various polyphenols, is discarded as a useless garbage after removing seeds. This study investigated the lipolytic effects of pine cone extract in differentiated 3T3-L1 adipocytes. Intracellular lipid accumulation was measured by Oil red O staining, free glycerol release by colorimetric reaction, and expression of genes related to lipid metabolism by real-time PCR. Compared to control, pine cone extract reduced intracellular lipid accumulation by 8.8% and increased free glycerol release by 8.2% a concentration of $5{\mu}g/mL$ in differentiated 3T3-L1 adipocytes. mRNA levels of fatty acid synthesis were not significantly different between control and pine cone extract, but mRNA levels of lipoprotein lipase (LPL) and hormone-sensitive lipase (HSL) significantly increased by 38.7% and 94.1% at a concentration of $5{\mu}g/mL$, respectively. Thus, pine cone extract is suggested to have lipolytic effects through induction of LPL and HSL gene expression.

• The Korean Journal of Mycology
• /
• v.49 no.4
• /
• pp.433-440
• /
• 2021

The fungal genus Trametes is globally distributed and comprises various wood-decay species, including the well-known medicinal mushroom Trametes versicolor, a popular remedy in traditional Asian medicine. Trametes species produce antioxidants, which have a wide range of health benefits. The pressent study evaluated seven indigenous Trametes species from Korea, which were cultivated in three different media (dextrose-yeast extract, DY; malt extract-yeast extract, MY; malt extract broth, MEB) and tested for antioxidant activity using the 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assays. We found that the medium consumption rate did not significantly differ between the media and among the strains (72-76%). However, the T. versicolor strains had a relatively low consumption rate (14-65%). The 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) tests demonstrated that culture filtrates of T. cf. junipericola, T. orientalis, T. suaveolens, and T. versicolor possessed antioxidant activity against damage from free radicals. In particular, T. cf. junipericola (DY) and T. versicolor (MY) had >80% activity in the DPPH and ABTS assays, compared with that of the positive control (ascorbic acid). Thus, our study identified promising candidates with substantial antioxidant activity among the indigenous strains of Trametes spp. from Korea.

• Bulletin of the Korean Mathematical Society
• /
• v.29 no.2
• /
• pp.265-275
• /
• 1992

The characteristic free representation theory of the general linear group has found a wide range of applications, ranging from the theory of free resolutions to the symmetric function theory. Representation theory is used to facilitate the calculation of explicit free resolutions of large classes of ideals (and modules). Recently, K. Akin and D. A. Buchsbaum [2] realized the Jacobi-Trudi identity for a Schur function as a resolution of GL$_{n}$-modules. Over a field of characteristic zero, it was observed by A. Lascoux [6]. T.Jozefiak and J.Weyman [5] used the Koszul complex to realize a formula of D.E. Littlewood as a resolution of schur modules. This leads us to further study resolutions of Schur modules of a particular form. In this article we will describe some new classes of finite free resolutions associated to the Pieri type skew Young diagrams. As a special case of these finite free resolutions we obtain the generalized Koszul complex constructed in [1]. In section 2 we review some of the basic difinitions and properties of Schur modules that we shall use. In section 3 we describe certain exact complexes associated to the Pieri type skew partitions. Throughout this article, unless otherwise specified, R is a commutative ring with an identity element and a mudule F is a finitely generated free R-module.e.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.117-125
• /
• 1998

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. The volume free energy associated with Helmholtz free energy includes strain energies caused by applied stress and dislocations piled up in interface(DPI). The energy due to DPI is found by modifying the result of Dundurs and Mura[4]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(r) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius $r^*$ and incubation time $t^*$ to maximise Helmholtz free energy is found in present analysis. Also, kinetics of cavity formation are investigated using the results obtained by Riede [7]. The incubation time is defined in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that 1) strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius $r^*$ decreases or holds constant with increase of the time until the kinetic condition(eq. 2.3) is satisfied. there for the cavity may not grow right after it is formed, as postulated by Harris [15], and Ishida and Mclean [16], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f)and particle size on the incubation time are estimated using material constants of the copper as matrix.

• Journal of Yeungnam Medical Science
• /
• v.20 no.1
• /
• pp.53-61
• /
• 2003

Background: Body weight is an important factor that influence the bone density in postmenopausal women except estrogen dificiency. However, different results are reported about the relationship between body composition and bone density in the postmenopausal women. We have studied the relationship between age, body weight, body mass index (BMI), waist hip ratio (WHR), muscle mass, fat mass, fat free mass and bone density. Materials and Methods: We have studied 127 persons of postmenopausal women who visited university medical center and examined the inbody 3.0 and Dual Energy X-ray Absorptiometry (DEXA) from Jan, 2001 to Jun, 2002. they didn't have any disease and didn't received hormone therapy, osteoporosis therapy or other medication that influence the bone density. Results: The numbers of study subjects is total 127 persons. Mean age is $56.9{\pm}5.14$, mean weight is $59.3{\pm}8.7kg$, mean BMI is $25.37{\pm}3.16(kg/m^2)$, mean fat mass is $20.02{\pm}5.05kg$, mean muscle mass is $37.49{\pm}4.50kg$, mean fat free mass is $39.80{\pm}4.70$, mean BMD is $0.828{\pm}0.148(g/cm^2$). In the result of linear regression analysis, age, height, weight, muscle mass, fat free mass, fat mass, BMI are significant determinants of BMD. In stepwise multiple regression analysis, age is the most significant determinant of BMD and besides age, fat free mass is the most significant determinant of BMD among body composition. Conclusion: In postmenopausal women, age, height, weight, BMI, muscle mass, fat free mass, fat mass are significant determinants of BMD and besides age, fat free mass is the most significant determinant of BMD among the body composition. So, diet and exercise that increase fat free mass will contribute to bone density increment.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.297-310
• /
• 2017

A CFD software was used to simulate free surface flow of SCC in the T-Box test. In total, seven simulations were developed to study the effect of rheological parameters on the non-restricted flow performance of SCC in both horizontal and vertical directions. Different suspending fluids having five plastic viscosity values between 10 and 50 Pa.s, three yield stress values between 14 and 75 Pa, one density of $2500kg/m^3$, and one shear elasticity modulus of 100 Pa were considered for suspension of 178 spherical particles of 20-mm diameter and $2500kg/m^3$ density. The results of the simulations are found to correlate well to changes in rheological parameters of the suspending fluid. Plastic viscosity was shown to be the most dominant parameter affecting flowability and dynamic stability compared to the yield stress. A new approach was proposed to evaluate performability of SCC based on a trade-off between flowability and dynamic stability.