• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.805-808
• /
• 2006

This paper deals with the dynamic stability analyses of columns with constant volume and both clamped ends. Numerical methods are developed for solving natural frequencies of such column, subjected to an axial compressive load. Differential equation governing free vibration of such column is derived. The numerical methods developed herein for computing natural frequencies are found to be efficient and robust. From the numerical results, the dynamic stability regions of such columns are obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1229-1234
• /
• 2006

This paper is concerned with the dynamic modeling and controller design for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Ravleigh-Ritz method based on Donnel-Mushtari shell theory. The boundary conditions at both ends were assumed to be shear diaphragm. To verify the theoretical results, a cylindrical shell structure made of aluminum was built ana tested by using impact hammer. Experimental results show that there are little discrepancies compared to theoretical results because of the boundary conditions at both ends. The MFC actuators were glued to the cylindrical shell in longitudinal and circumferential directions. The PPF controller were designed for lowest two modes and applied to the MFC actuators. The experimental results show that vibrations can be successfully suppressed.

• 대한조선학회지
• /
• 제2권1호
• /
• pp.3-8
• /
• 1965

The objects of this paper are to stimulated discussion of the criteria used for deciding the scantling of watertight bulkhead stiffener of steel fishing boats ranged of length of 20 meters to 80 meters and to suggest a method of calculation based on beam theory. Present knowledge is examined and it appears that failure of a bulkhead stiffener is comparatively rare. Regarding its structure bulkhead does not contribute on longitudinal strength of a ship. The strength of a bulkhead stiffener can be treated locally. Assuming bulkhead stiffeners are free ends and fixed ends theoretical required section modulus are calculated and compared with classification societies' rule. Welding effect of a bulkhead stiffener to bulkhead plate and a bracket to stiffener and deck plate are considered. On various conditions of joints are suggested.

• Steel and Composite Structures
• /
• 제27권4호
• /
• pp.509-523
• /
• 2018

This paper presents experimental results on the residual bond-slip behavior of high strength concrete-filled square steel tube (HSCFST) after elevated temperatures. Three parameters were considered in this test: (a) temperature (i.e., $20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$); (b) concrete strength (i.e., C60, C70, C80); (c) anchorage length (i.e., 250 mm, 400 mm). A total of 17 HSCFST specimens were designed for push-out test after elevated temperatures. The load-slip curves at the loading end and free end were obtained, in addition, the distribution of steel tube strain and the bond stress along the anchorage length were analyzed. Test results show that the shape of load-slip curves at loading ends and free ends are similar. With the temperature constantly increasing, the bond strength of HSCFST increases first and then decreases; furthermore, the bond strength of HSCFCT proportionally increases with the anchoring length growing. Additionally, the higher the temperature is, the smaller and lower the bond damage develops. The energy dissipation capacity enhances with the concrete strength rasing, while, decreases with the temperature growing. What is more, the strain and stress of steel tubes are exponentially distributed, and decrease from the free end to loading end. According to experimental findings, constitutive formula of the bond slip of HSCFST experienced elevated temperatures is proposed, which fills well with test data.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.970-978
• /
• 2002

이제까지 아치의 자유진동에 관한 연구들은 모두 극좌표계에서 해석한 연구들이다. 이 논문은 극좌표계에서 아치의 해석을 지양하고, 직교좌표계에서 아치의 자유진동을 해석한 연구이다. 아치의 자유진동을 지배하는 미분방정식을 직교좌표계에서 유도하고. 이를 수치해석하여 고유진동수와와 진동형을 산출하였다. 미분방정식에는 회전관성 효과를 고려하고. 아치의 선형은 포물선으로 채택하였다. 실제 구조물에 대한 적용을 위하여 비대칭 축을 갖는 아치를 수치해석 하였다. 본 연구와 SAP 2000의 결과를 비교하여 본 연구의 타당성을 검증하였다. 수치해석의 결과로 아치의 무차원 변수들이 무차원 고유진동수에 미치는 영향을 분석하고. 전형적인 진동형의 예를 그림에 나타내었다.

• 대한토목학회논문집
• /
• 제41권3호
• /
• pp.191-200
• /
• 2021

이 논문은 아치의 자유진동 해석에서 아치 정점의 합응력 경계조건 이용에 관한 연구이다. 연구 대상 아치는 마제형 타원 대칭 아치이다. 마제형 타원 아치의 자유진동을 다룬 연구는 이미 문헌에 발표된 바 있다. 이 재고 논문은 기존 문헌에서 사용한 아치 양단의 경계조건을 대신할 수 있는 아치 정점의 합응력 경계조건의 적용성을 연구하는 데 그 목적이 있다. 기존 문헌의 이론을 이용하여 아치 정점의 합응력 경계조건을 유도하고, 이를 이용하여 아치의 고유진동수와 진동형을 산정하였다. 이 연구의 결과는 기존 문헌 및 유한요소해 ADINA의 결과와 잘 일치하여, 아치 정점의 합응력 경계조건을 아치의 자유진동 해석에 적용할 수 있음을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.340-343
• /
• 2007

The differential equations governing free, in-plane vibrations of non-circular arches with the translational (radial and tangential directions) and rotational springs at the ends, including the effects of rotatory inertia, shear deformation and axial deformation, are solved numerically using the corresponding boundary conditions. The lowest four natural frequencies for the parabolic geometry are calculated over a range of non-dimensional system parameters: the arch rise to span length ratio, the slenderness ratio, and the translational and rotational spring parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.815-818
• /
• 2006

This paper deals with the free, in-plane vibrations of curved members with the translational(radial and tangential directions) and rotational springs at the ends. The governing differential equations for the circular curved member are solved numerically using the corresponding boundary conditions. The lowest three natural frequencies and the corresponding mode shapes are obtained over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, the translational spring stiffness, and the rotational spring stiffness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.977-981
• /
• 2002

The ordinary differential equations governing free vibrations of elastic horizontally curved beams are derived, in which the effect of shear deformation as well as the effects of vertical, rotatory and torsional inertias are included. Frequencies and mode shapes are computed numerically for parabolic curved beams with the hinged-hinged, hinged-clamped and clamped-clamped ends. Comparisons of natural frequencies between this study and ADINA are made to validate the theories and numerical methods developed herein. The lowest three natural frequency parameters are reported, with and without the effect of shear deformation, as functions of the three non-dimensional system parameters: the horizontal rise to span length ratio, the slenderness ratio and the stiffness parameter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.395.1-395
• /
• 2002

The ordinary differential equations governing free vibrations of elastic horizontally curved beams are derived, in which the effect of shear deformation as well as the effects of vertical deflection, rotatory and torsional inertias are included. Frequencies and mode shapes are computed numerically fer parabolic curved beams with hinged-hinged, hinged-clamped and clamped-clamped ends. Comparisons of natural frequencies between this study and ADINA are made to validate the theories and numerical methods developed herein. (omitted)