• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.863-870
• /
• 2018

The traditional power control theories for the harmonic reduction methods in multilevel inverters are found to be unreliable under unbalanced load conditions. The unreliability in harmonic mitigation is caused by voltage fluctuations, non-linear loads, the use of power switches, etc. In general, the harmonics are reduced by filters. However, such devices are an expensive way to provide a smooth and fast response to secure power systems during dynamic conditions. Hence, the Decoupled Double Synchronous Reference Frame (DDSRF) theory combined with a State Delay Controller (SDC) is proposed to achieve a harmonic reduction in power systems. The DDSRF produces a sinusoidal harmonic that is the opposite of the load harmonic. Then, it injects this harmonic into power systems, which reduces the effect of harmonics. The SDC is used to reduce the delay between the compensation time for power injection and the generation of a reference signal. The proposed technique has been simulated using MATLAB and its reliability has been verified experimentally under unbalanced conditions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.44-54
• /
• 2007

In the military field, according to the MIL-STD-188-220, which is an Ad-Hoc communication protocol used for sending out or receiving data and voice smoothly among nodes in the situation that wireless communication nodes move arbitrarily, data communication is cut off because nodes can not know topology changes perpetually in the link disconnection state due to node movement in the case that transmitters do not confirm whether data is delivered to receivers or not, and transmit only the data having routine precedence continuously. In order to solve this problem, we have proposed the technique that makes efficient data communication possible by achieving a rapid topology change detection and link information update using TEST frame. We have analyzed TEST frame application effects in the two aspects of the topology update delay time and the data transmission success ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1430-1437
• /
• 1996

A low delay code excited linear predictive speech coder(LD-CELP) at bit rates under 8kbps is considered. We try to improve the perfomance of speech coder with frame type dependent modification of synthesis filter. We first classify frames into 3 groups: voiced, unvoiced and onset. For voicedand unvoiced frame, the spectral envelope of the synthesis filter is adapted to the phonetic characteristics. For transition frame from unvoiced to voiced, the synthesis filter which has been interpolated with the bias filter is used. The proposed vocoder produced more clear sound with similar delay level than other pre-existing LD-CELP vocoders.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.244-246
• /
• 2001

In a full digital implementation of a current regulator, the voltage output is inevitably delayed due to arithmetic calculation and PWM. In case of the synchronous frame current regulator, the time delay is accompanied by the rotation of frame. In some applications in which the ratio of sampling frequency to output frequency is not high enough, such as high power drive or super high-speed drive, it is known that the effect of rotation of frame during the delay time causes phase and magnitude error in the voltage output. The error degrades the dynamic performance and can bring about the instability of current regulator at high speed. It is also intuitively known that advancing the phase of voltage output can mitigate the instability. In this paper, the instability problems are studied analytically and a compensation method for the error has been proposed. By means of computer simulation and complex root locus analysis, comparative study with conventional methods is carried out and the effectiveness of proposed method is verified.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.12
• /
• pp.1001-1008
• /
• 2003

A time-delay compensation method for vector control system is proposed that can compensate for voltage and current distortions resulting from a time delay in the overall system due to the low pass filter, hysteresis control inverter, microprocessor program computation time, and so on. The proposed scheme estimates the time delay using the difference between the Q-axis stator current command and the time-delayed actual Q-axis stator current in a synchronous reference frame, then compensates the time delay in the voltage and current using the angular displacement of a DQ transformation. Accordingly, the proposed scheme can accurately compensate for the time delay related to the overall system, thereby significantly improving the performance of the vector control system, as verified by simulation and experiment.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.131-138
• /
• 2020

In this paper, we analyze the delay phenomenon that can occur when controlling an unmanned aerial vehicle using a camera and describe a solution to solve the phenomenon. The group of pictures (GOP) value is changed in order to reduce the delay according to the frame data size that can occur in the moving image data transmission. The appropriate GOP values were determined through experimental data accumulation and validated through camera self-test, system integration laboratory (SIL) verification test and system integration test.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.6
• /
• pp.255-260
• /
• 2017

The limitation of real-time video conferencing system is that the delay of network and buffering and the transmission of user information are not efficiently performed between systems, so real - time performance is not guaranteed completely. In order to overcome this problem, the study on the extension of the network infrastructure and the jitter delay is actively carried out, but the study on the buffering delay is insufficient. In this paper, we propose a frame-rate control buffer management (FRCB) scheme to solve the problem caused by buffering delay. The FRCB is used to prevent overflow and underflow of the buffer by adopting the two-stage buffer threshold of Fast-play THreshold (FTH) and Slow-play THreshold (STH). Therefore, it showed better performance than jitter buffer even under high CPU load, and showed that it is suitable for high quality real time video conferencing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.445-453
• /
• 2002

We propose a cell-multiplexing scheme for the real-time communication service in ATM network and a new service discipline guarantee end-to-end delay based on pseudo-isochronous cell switching. The proposed scheme consists of two level frame hierarchy, upper and lower frame, which is used to assign the bandwidth and to guarantee the requested delay bound, respectively. Since the proposed algorithm employs two level frame hierarchy, it can overcome the coupling problem which is inherent to the framing strategy. The proposed scheme consists of two components, traffic controller and scheduller, as the imput traffic description model and regulates the input traffic specification. The function of the traffic controller is to shape real-time traffic to have the same input pattern at every switch along the path. The end-to-end delay is bounded by the scheduller which can limit the delay variation without using per-session jitter controllers, and therefore it can decrease the required buffer size. The proposed algorithm can support the QoS's of non-real time traffic as well as those of real time traffic

• Journal of Broadcast Engineering
• /
• v.12 no.6
• /
• pp.574-584
• /
• 2007

As the real time multimedia service become more popular, the needs of transmission with low delay and high quality are getting more stronger. Among those video compression technologies, the rate control method dose an important role in getting the effective data transmitting and the high image quality. In this paper, we combined the feature of CBR and VBR coding methods to propose a new bit-rate control method witch allows each frame to generates bits in the defined fluctuation range and applies a scene change detection at a part of frame and also can maintain low-delay and high quality even if the perfect VBR transmission environment is not guaranteed. The experiment result shows the proposed algorithm provides more effective method than TMN8 in real time application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.177-182
• /
• 2014

In this paper, we propose an energy efficient sink node based MAC protocol for Wireless Sensor Networks (WSNs). The proposed sink node-based MAC (SB-MAC) protocol uses a RB(rapid beacon) frame to save sender's energy consumption and to reduce transmission delay. The RB frame is a modified IEEE 802.15.4 beacon frame. The RB frame contains the length of the sender nodes data. Using this information other nodes except sender and receiver nodes can be stay sleep mode long time to reduce energy consumption. Results have shown that the SB-MAC protocol outperformed other protocols like X-MAC and RI-MAC in terms of packet delivery delay and energy consumption. The SB-MAC protocol is especially energy efficient for the networks with one sink node and many senders.