• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.333-340
• /
• 2019

Tests using a middle velocity propulsion impact machine (MVPIM) were performed to verify the impact resistance capability of sandwich concrete panels (SCP) in a modular liquefied natural gas (LNG) outer tank, and numerical models were constructed and analyzed. $2{\times}2m$ specimens with plain sectional characteristics and specimens including a joint section were used. A 51 kg missile was accelerated above 45 m/s and impacted to have the design code kinetic energy. Impact tests were performed twice according to the design code and once for the doubled impact speed. The numerical models for simulating impact behaviors were created by LS-DYNA. The external steel plate and filled concrete of the panel were modeled as solid elements, the studs as beam elements, and the steel plates as elasto-plastic material with fractures; the CSCM material model was used for concrete. The front plate deformations demonstrated good agreement with those of other tests. However the rear plate deformations were less. In the doubled speed test for the plain section specimen, the missile punctured both plates; however, the front plate was only fractured in the numerical analysis. The impact energy of the missile was transferred to the filled concrete in the numerical analysis.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.31-42
• /
• 1998

Recently crosshole seismic tomography has come to be widely used especially for the civil engineering, because it can provide more detail information than any other surface method, although the resolution of tomogram will be inevitably deteriorated to some extent due to the limited wavefield aperture on the nonuniqueness of traveltime inversion. In addition, our field sites often consist of a high-velocity bed rock overlain by low-velocity rock, sometimes with a contrast of more than 45 percent, and furthermore the bed rock is folded. The first arriving waves can be then the refracted ones that travel along the bed rock surface for some source/receiver distances. Thus, the desirable first arrivals can be easily misread that cause severe distortion of the resulting tomogram, if it is concerned with (straight ray) traveltime inversion procedure. In this case, comparision with synthetic data (forward modeling) is a valuable tool in the interpretation process. Besides, abundant information is contained in the crosshole data. For instance, examination of tube waves can be devoted to detecting discontinuities within the borehole such as breakouts, faults, fractures or shear zones as well as the end of the borehole. Specific frequency characteristics of marine silty mud will help discriminate from other soft rocks. The aim of this paper is to present several strategies to analyze and interpret the crosshole data in order to improve the ability at first to determine the spatial dimensions of interwell anomalies and furthermore to understand the underground structures. To this end, our field data are demonstrated. Possibility of misreading the first arrivals was illustrated. Tube waves were investigated in conjunction with the televiewer images. Use of shot- and receiver gathers was examined to benefit the detectabilities of discontinuities within the borehole.

• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2006

Recently, spillways are need to control stable water level for supporting main dams because of floods by unusual change of weather such as Typhoon Rusa. This study has been focused on the amount of leakage through the rock mass distributed fractures and joints under the opened emergency spillway. It is very important to evaluate the amount of leakage as these affect stability of spillway by interaction between effective stress and pore pressure. The commercial program MAFIC has been used for analyzing groundwater flow in fractured rock mass. The results showed that the values of range, average and deviation of leakage were 2.85∼ 3.79×10-1, 3.32×10-1 and 1.70×10-2 m3/day/m2 respectively. Secondary, we have estimated the effect of grouting after the transmissivity(Tf) of joint 1 as main pathway of leakage known from above results was changed from 1.78×10-7 to 1.59×10-9 m2/s. The results showed that the values of range, average and deviation of leakage were 7.80×10-4∼1.53×10-3, 1.18×10-3 and 1.32×10-4 m3/day/m2 respectively. As the result, the amount of leakage after grouting has been decreased by a ratio of 1 to 277.

• Journal of the Korean Geophysical Society
• /
• v.4 no.1
• /
• pp.57-69
• /
• 2001

We have carried out a nondestructive close examination for the purpose of the structural safety diagnosis of the Three-Story Pagoda(Seokga Pagoda) in Bulkuk temple in the city of Kyungju, Kyungbuk, Korea. Ultrasonic wave velocities were measured at 456 points of the pagoda comprising 44 blocks to estimate the mechanical properties of rock blocks constituting the pagoda. The measured velocities have the range of 1217 to 4403 m/sec with the average of 3227 m/sec. The empirical relationship between the ultrasonic velocity and the uniaxial compressive strength yielded the estimation of strength of each block, ranging from 134 to 844 kg/cm^2 and averaging 463 kg/cm^2. With an assumption that the strength of each block is described as a random variables having a normal distribution, we calculated the probability of failure of rock blocks of the pagoda. Our investigation revealed that the probability of the structural failure due to the weight of higher blocks is very low. However, the probability of partial failure around contact area is substantial, which is consistent with the appearance that edges and the corners of some blocks were broken off. The platform under the body of the pagoda appeared to be structurally weak as the probability of tensile failure of the lower platform is up to 18%, and diagonal fractures are shown where the probability of failure is high.

• Journal of Korean Foot and Ankle Society
• /
• v.24 no.4
• /
• pp.135-141
• /
• 2020

Purpose: This study evaluated the results of two groups-the early group and midterm group-comparatively in the treatment of hallux valgus using a scarf osteotomy. Materials and Methods: From January 2005 to December 2009 (Group 1) and from January 2010 to December 2013 (Group 2), this study compared hallux valgus cases treated by a scarf osteotomy by a single surgeon with at least a five-year follow-up. Results: The average ages of Group 1 and Group 2 were 50.5 and 51.7 years old, respectively. The average follow-up of Groups 1 and 2 were 7.4 and 6.2 years, respectively. Groups 1 and 2 had 86 cases (53 patients) and 93 cases (64 patients) with at least a five-year follow-up, respectively. The average hallux valgus angle (HVA) and 1-2 intermetatarsal angle (IMA) of Group 1 were improved from 31.3° and 13.9° preoperatively to 11.3° and 6.8° at the final follow-up, respectively (p<0.001). The average HVA and 1-2 IMA of Group 2 were improved from 31.7° and 13.4° preoperatively to 8.9° and 6.6° at the final follow-up, respectively (p<0.001). The mean American Orthopaedic Foot and Ankle Society (AOFAS) score of both groups increased from 48.5 and 45.0 points preoperatively to 73.7 and 82.4 points at the final follow-up, respectively. The numbers of patient-assessed subjective satisfaction of Groups 1 and 2 at the final follow-ups were as follows: excellent, 27 and 36 (31.4%, 38.7%); good, 34 and 49 (39.5%, 52.7%); fair, 13 and 5 (15.1%, 5.4%); poor, 12 and 3 (13.9%, 3.2%); respectively. Neither troughing nor stress fractures occurred in both groups. Conclusion: Scarf osteotomy for treating hallux valgus is an excellent surgical method with a relatively low incidence of complications. The results in Group 2 were better than those in Group 1, showing that more surgical experience and evolution of the techniques provided better results.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.973-980
• /
• 2018

Study Design: Retrospective review. Purpose: To identify the trends in stimulator use, pair those trends with various grafting materials, and determine the influence of stimulators on the risk of revision surgery. Overview of Literature: A large number of studies has reported beneficial effects of electromagnetic energy in healing long bone fractures. However, there are few clinical studies regarding the use of electrical stimulators in spinal fusion. Methods: We used insurance billing codes to identify patients with lumbar disc degeneration who underwent anterior lumbar interbody fusion (ALIF). Comparisons between patients who did and did not receive electrical stimulators following surgery were performed using logistic regression analysis, chi-square test, and odds ratio (OR) analysis. Results: Approximately 19% of the patients (495/2,613) received external stimulators following ALIF surgery. There was a slight increase in stimulator use from 2008 to 2014 (multi-level $R^2=0.08$, single-level $R^2=0.05$). Patients who underwent multi-level procedures were more likely to receive stimulators than patients who underwent single-level procedures (p<0.05; OR, 3.72; 95% confidence interval, 3.02-4.57). Grafting options associated with most frequent stimulator use were bone marrow aspirates (BMA) plus autograft or allograft for single-level and allograft alone for multi-level procedures. In both cohorts, patients treated with bone morphogenetic proteins were least likely to receive electrical stimulators (p<0.05). Patients who received stimulation generally had higher reimbursements. Concurrent posterior lumbar fusion (PLF) (ALIF+PLF) increased the likelihood of receiving stimulators (p<0.05). Patients who received electrical stimulators had similar revision rates as those who did not receive stimulation (p>0.05), except those in the multilevel ALIF+PLF cohort, wherein the patients who underwent stimulation had higher rates of revision surgery. Conclusions: Concurrent PLF or multi-level procedures increased patients' likelihood of receiving stimulators, however, the presence of comorbidities did not. Patients who received BMA plus autograft or allograft were more likely to receive stimulation. Patients with and without bone stimulators had similar rates of revision surgery.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.311-316
• /
• 2018

Average life expectancy is getting longer due to medical developments and improvements in living standards. So much so that the elderly have an increased risk of developing osteoporosis. Therefore, it is important to prevent, diagnose, and treat the senile disease at an early stage through a bone density test. Bone density is measured by dual energy X-ray absorption (DXA). In this study, while using DXA, in cases when the measurements for both the lumbar and the femur could not be taken simultaneously, the correlation between both measurements were known, and the measurement of one area was used to make a clinical inference for the value of the other. Measurements were taken using Lunar Prodigy Advance (GE) for 43 participant with clinically significant fractures. Statistical calculations were produced and analysed regarding bone density. In case of T-score, lumbar spine produced a statistical result of $-2.112{\pm}1.836$ and femur neck was $-1.716{\pm}1.565$. In case of Z-score lumbar spine produced a statistical result of $-0.151{\pm}1.513$, and femur neck $-0.026{\pm}1.283$. It is indicated that the pearson correlation coefficient of T-score between lumbar spine and femur neck is high at 0.699, and the pearson correlation coefficient of Z-score is considered relatively high at 0.503. The correlation of bone density between lumbar spine and femur neck is shown to be statistically meaningful in T-score's p-value at 0.000 and Z-score's p-value at 0.001. In conclusion, it seems to have clinical usefulness that we can infer the result of one measurement through that of the other part tested, based on the knowledge of the correlation coefficients between lumbar spine and femur neck.

• Economic and Environmental Geology
• /
• v.52 no.4
• /
• pp.275-290
• /
• 2019

Geochemical study was conducted to elucidate the origin of fluorine (F) distributed in the rocks within the four areas of Yongyudo and Sammokdo, Incheon, which have been used as the source area of land reclamation for the $3^{rd}$ and $4^{th}$ stage construction sites of the Incheon International Airport. The main geology of the study area is Triassic biotite granite. Fluorine is contained at high levels in biotite granite, mylonite, and dykes (andesite and, basaltic-andesite). Furthermore, the higher concentrations of fluorine in the biotite granite can be contributed to fluorite. The results of microscopic analyses reveal that the fluorite was mostly observed as small vienlets together with quartz. This features support that fluorite was naturally formed due to the secondary process of hydrothermal fluids. In addition, fluorine was investigated to be highly enriched in a large amount of mica within the veins. In the case of mylonite, a high levels of fluorine was contributed to a large amount of sericite. The sericites contained in the mylointe, differently to those of the biotite granite, filled the micro-fractures of quartz formed as a result of mylonitization and included small cataclastic quartz grains. This indicates that fluorine was naturally enriched due to the alteration of hydrothermal fluids filling fractured zones formed by mylonitization. Consequently, the results of petrological and mineralogical study confirm that the fluorine distributed in the rocks within the Yongyudo and Sammokdo originated naturally.

• Journal of Bone Metabolism
• /
• v.25 no.4
• /
• pp.195-211
• /
• 2018

Background: To develop guidelines and recommendations to prevent and treat glucocorticoid (GC)-induced osteoporosis (GIOP) in Korea. Methods: The Korean Society for Bone and Mineral Research and the Korean College of Rheumatology have developed this guideline based on Guidance for the Development of Clinical Practice Guidelines ver. 1.0 established by the National Evidence-Based Healthcare Collaborating Agency. This guideline was developed by adapting previously published guidelines, and a systematic review and quality assessment were performed. Results: This guideline applies to adults aged ${\geq}19years$ who are using or plan to use GCs. It does not include children and adolescents. An initial assessment of fracture risk should be performed within 6 months of initial GC use. Fracture risk should be estimated using the fracture-risk assessment tool (FRAX) after adjustments for GC dose, history of osteoporotic fractures, and bone mineral density (BMD) results. All patients administered with prednisolone or an equivalent medication at a dose ${\geq}2.5mg/day$ for ${\geq}3months$ are recommended to use adequate calcium and vitamin D during treatment. Patients showing a moderate-to-high fracture risk should be treated with additional medication for osteoporosis. All patients continuing GC therapy should undergo annual BMD testing, vertebral X-ray, and fracture risk assessment using FRAX. When treatment failure is suspected, switching to another drug should be considered. Conclusions: This guideline is intended to guide clinicians in the prevention and treatment of GIOP.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.478-489
• /
• 2018

Total knee arthroplasty has become a standard procedure for advanced knee arthritis to relieve pain and improve function. Computer-assisted navigation systems have been used in total knee arthroplasty to improve the mechanical axis of the limb as well as the alignment and position of the components. A computer-assisted navigation system has the advantage of real-time feedback during surgery, such as mediolateral balance in extension and flexion gap, alignment of the lower limb, and components. On the other hand, the computer-assisted navigation system requires an additional stab wound for tracker fixation, which can increase the likelihood of superficial wound infection and stress fractures and increase the operation time and cost of surgery. The clinical efficacy of computer-assisted navigation in total knee arthroplasty is also controversial. Compared to the conventional technique, computer navigation improves the accuracy of the postoperative mechanical axis within outliers of $3^{\circ}$ varus or $3^{\circ}$ valgus. This paper reviews the surgical technique, pitfalls, clinical and radiological outcomes, useful clinical cases, and future perspectives in computer-assisted navigation total knee arthroplasty.