• Title/Summary/Keyword: fracture patterns

Search Result 281, Processing Time 0.021 seconds

Comparison of the fracture resistances of glass fiber mesh- and metal mesh-reinforced maxillary complete denture under dynamic fatigue loading

  • Im, So-Min;Huh, Yoon-Hyuk;Cho, Lee-Ra;Park, Chan-Jin
    • The Journal of Advanced Prosthodontics
    • /
    • v.9 no.1
    • /
    • pp.22-30
    • /
    • 2017
  • PURPOSE. The aim of this study was to investigate the effect of reinforcing materials on the fracture resistances of glass fiber mesh- and Cr-Co metal mesh-reinforced maxillary complete dentures under fatigue loading. MATERIALS AND METHODS. Glass fiber mesh- and Cr-Co mesh-reinforced maxillary complete dentures were fabricated using silicone molds and acrylic resin. A control group was prepared with no reinforcement (n = 15 per group). After fatigue loading was applied using a chewing simulator, fracture resistance was measured by a universal testing machine. The fracture patterns were analyzed and the fractured surfaces were observed by scanning electron microscopy. RESULTS. After cyclic loading, none of the dentures showed cracks or fractures. During fracture resistance testing, all unreinforced dentures experienced complete fracture. The mesh-reinforced dentures primarily showed posterior framework fracture. Deformation of the all-metal framework caused the metal mesh-reinforced denture to exhibit the highest fracture resistance, followed by the glass fiber mesh-reinforced denture (P<.05) and the control group (P<.05). The glass fiber mesh-reinforced denture primarily maintained its original shape with unbroken fibers. River line pattern of the control group, dimples and interdendritic fractures of the metal mesh group, and radial fracture lines of the glass fiber group were observed on the fractured surfaces. CONCLUSION. The glass fiber mesh-reinforced denture exhibits a fracture resistance higher than that of the unreinforced denture, but lower than that of the metal mesh-reinforced denture because of the deformation of the metal mesh. The glass fiber mesh-reinforced denture maintains its shape even after fracture, indicating the possibility of easier repair.

A CLINICO-RADIOLOGIC STUDY OF BONY REMODELING OF THE FRACTURED CONDYLES IN CHILDREN (소아에서 골절된 하악과두의 골개조 양상에 관한 임상 및 방사선학적 연구)

  • Cho Jeong-Shin;Park Chang-Seo
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.25 no.2
    • /
    • pp.471-482
    • /
    • 1995
  • Bony remodeling pattern of condyle fractures in children are different from in adult for growing of condyle, also might affect treatment and prognosis of the condyle fracture. Subjects of this clinical and radiologic study were 26 temporomandibular joints diagnosed as condyle fracture in 23 patients under 15 years old age. They were treated with conservative method at Dental Hospital of Yonsei University from Jan., 1986 to Oct., 1994. Bony remodeling related with fracture pattern was evaluated. The results obtained are as follows: 1. The ratio of male to female in patients with condyle fracture was 1 : 0.9 and the difference of sex ratio was not noted. Comparing with preschool-age group and school-age group, age frequency was higher in preschool-age group(83%). 2. Fallen down(54%) was the most frequent cause of condyle fractures. Traffic accident and slip down were followed. 3. The most common clinical sign of condyle fractures was tenderness to paipation09 cases). Mouth opening limitation07 cases), swelling(7 cases), malocclusion(3 cases) were next in order. 4. According to sites of condyle fractures, unilateral fractures were in 20 patients and bilateral fractures in 3 patients, therefore total 23 patients-26 cases of condyle fracture were observed. According to fracture distribution, condyle fractures were in 10 patients(44%). Condyle fractures with symphysis fracture(9 patients, 39%), condyle fractures with ascending ramus fracture(2 patients, 9%), condyle fracture with mandibular body fracture(1 patient, 4%), and condyle fractures with mandibular angle fracture(1 patient, 4%) were followed. 5. In displacement pattern of fractured fragment of mandibular condyle, dispiacement(17 cases, 66%) was most common. Dislocation(5 cases, 19%) and deviation (4 cases, 15%) were next in order. 6. During the observation period of fractured condyles, remodeling patterns of fracture sites related with articular fossa were observed with usual condylar shape in 23 cases and with prominently different shape in 3 cases.

  • PDF

Biomechanical Complications : Fracture and Screw loosening (Biomechanical Complications : 파절과 나사풀림)

  • Kim, Tae in
    • The Journal of the Korean dental association
    • /
    • v.53 no.5
    • /
    • pp.307-317
    • /
    • 2015
  • Although the long-term success of osseointegrated endosseous implants for the support of fixed dental prostheses has been reported, the increasingly widespread use of implant-supported prostheses has led to problems associated with their structural integrity. The most common biomechanical complications observed in dental implant treatment are fracture and screw loosening. The nature of loosening or fracture of dental implant components is complex, since it involves fatigue, fitness, and varied chewing patterns and loads. To assess the service life of the components of the prosthetic system, a knowledge of the loads transmitted through the system is necessary. Design of the final restoration and occlusion in relation to the geometry of a prosthetic restoration has a great influence on the mechanical loading of the implant. It is proposed that control of force in oral cavity may play a larger role in failures than previously believed. Based on theoretic consideration and clinical experiences with dental implant, this article gives simple guidelines for controlling these loads.

Deformation and Fracture Behavioos of Soda-lime Glass by Sliding Microindentation (미끄럼 미소압입에 의한 소다석회 유리의 변형 및 파괴 거동)

  • 안유민;최상현;박상신
    • Tribology and Lubricants
    • /
    • v.13 no.4
    • /
    • pp.18-25
    • /
    • 1997
  • The various deformation and fracture behaviors under light loads in soda-lime glass under sliding Vickers indentation have been studied. In soda-lime glass, deformation and fracture behaviors can be classified into four different patterns by applied load. At very light load (<0.1N), plastic deformation only occurred. At low loads (0.1~0.8N), median crack, appear. At intermediate loads (0.8~3.0N), median and lateral cracking occurred leading to a large chipping. At high loads (3.0~6.0N), a crushed zone was observed with median crack. The friction experiment finds that the increasing in the friction coefficients coincides with the onset of crushing in soda-lime glass.

Panfacial Bone Fracture and Medial to Lateral Approach

  • Kim, Jiye;Choi, Jin-Hee;Chung, Yoon Kyu;Kim, Sug Won
    • Archives of Craniofacial Surgery
    • /
    • v.17 no.4
    • /
    • pp.181-185
    • /
    • 2016
  • Panfacial bone fracture is challenging. Even experienced surgeons find restoration of original facial architecture difficult because of the severe degree of fragmentation and loss of reference segments that could guide the start of facial reconstruction. To restore the facial contour, surgeons usually follow a general sequence for panfacial bone reduction. Among the sequences, the bottom-to-top and outside-in sequence is reported to be the most widely used in recent publications. However, a single sequence cannot be applied to all cases of panfacial fractures because of the variations in panfacial bone fracture patterns. In this article, we intend to find the reference and discuss the efficacy of inside-out sequence in facial bone fracture reconstruction.

Fracture Characteristics of Cutting Tools in Machining of Hardened Alloy Steel (열처리한 합금공구강의 절삭에서 공구파손의 특성)

  • Noh, S.L.;An, S.O.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.7 no.3
    • /
    • pp.199-205
    • /
    • 1994
  • The fracture characteristics and tool life of ceramics and WC, CBN cutting tool when turning heat treated steel STD11($H_RC$ 60) were investigated experimentally to clarify the machinability and optimum tool materials in cutting of difficult-to-cut material with high hardness. Forthermore, the behaviors of the tool wear and failure were examined with regard to cutting force. The hardened steel wore the cutting tool edge rapidily and increased the cutting forces, especially radial force. The tool was worn by the abrasive action. Flank Weat of $Al_2O_3-TiC$ ceramic and WC tool become relatively large and CBN & $Al_2O_3$, ceramic tool had a long life among the tool materials tested. The tool fracture patterns were just like minor cutting wear, flank wear, crater wear, notch wear, chipping. Flank wear rate was accelerated by occurrence of chipping. During the proceeding of machining, it was possible to foresee the catastrophic fracture of tool by abrupt increase of radial force.

  • PDF

Normal ossification of the glenoid mimicking a glenoid fracture in an adolescent patient: a case report

  • Maria Galan-Olleros;Rosa M. Egea-Gamez;Angel Palazon-Quevedo;Sergio Martinez-Alvarez;Olga M. Suarez Traba;Marta Escribano Perez
    • Clinics in Shoulder and Elbow
    • /
    • v.26 no.3
    • /
    • pp.306-311
    • /
    • 2023
  • A 13-year-old male was diagnosed with a glenoid fracture following direct shoulder trauma, for which surgical treatment was considered. After referral to a center for pediatric orthopedic care, physical examination, contralateral shoulder X-ray, and detailed computed tomography examination ruled out the presence of fracture; these findings were later confirmed by magnetic resonance imaging. Normal ossification patterns in the adolescent shoulder may simulate a fracture in traumatic settings. To accurately diagnose and manage pediatric shoulder pathology, orthopedic surgeons must be aware of the normal anatomy of the growing shoulder, its secondary ossification centers, and growth plates.

Thoracolumbar Spine Injury (흉요추부 손상)

  • Ahn, Myun-Whan
    • Journal of Yeungnam Medical Science
    • /
    • v.19 no.2
    • /
    • pp.73-91
    • /
    • 2002
  • Method of management of the spine injury should be determined, based on the status of neurological injury as well as on the presence of traumatic instability. At the thoracic and lumbar spine, patterns of neurological injury are different from the cervical spine due to their neuro-anatomical characteristics. Especially, at the thoracolumbar junction, neurological injury patterns with their respective prognosis vary from the complete cord injury or conus medullaris syndrome to the cauda equina syndrome according to the injury level. The concept of Holdsworth's instability based on the posterior ligament complex theory has evolved into the current 3-column theory of Denis. Flexion-rotation injury and fracture-dislocation are well known to be unstable that surgical fixation is frequently needed for these injuries. However, there have been some controversies for the stability of burst fractures and their treatment, such as indirect or direct decompression and anterior or posterior approach. In this article, current concepts and management of traumatic instabilities at the thoracic and lumbar spine have been reviewed and summarized.

  • PDF

Factors Affecting Hemodynamic Instability in Patients with Pelvic Bone Fracture (골반골 골절 환자의 혈역학적 불안정화에 미치는 영향요소)

  • Park, Seung Min;Lee, Kang Hyun;Choi, Han Ju;Park, Kyung Hye;Kim, Sang Chul;Kim, Hyun;Hwang, Sung Oh
    • Journal of Trauma and Injury
    • /
    • v.21 no.1
    • /
    • pp.22-27
    • /
    • 2008
  • Purpose: Treatment and prognosis in patients with pelvic bone fracture depend on the characteristics of the fracture and the stability of the pelvic ring. The purpose of this study is to analyze the characteristics of and the relationships between fracture patterns, injury mechanisms, clinical courses, and prognoses according to the hemodynamic pattern. Methods: Between January 2004 and September 2006, 89 patients under diagnosis of pelvic bone fracture were retrospectively analyzed on the basis of medical records and radiologic examinations. Patients with confirmed hemorragic shock with a systolic pressure of less than 90 mmHg were defined as the shock group. Young's classification was used to characterize fracture patterns. Factors relating to the clinical manifestation and to treatments such as transfusion and surgery were analytically compared. Results: The mean age of the patients was $48.8{\pm}18.7$, among which 49 (55.1%) were male. The numbers of shock and non-shock patients were 35 (39.3%) and 54 (60.7%) respectively. Eighteen (51.4%) of the shock patient had injuries resulting from pedestrian accidents (p=0.008). According to Young's classification, lateral impact fractures amounted to 20 and 33, front-rear impact fractures to 9 and 20, and multiple fractures to 6 and 1 among the shock and non-shock patients, respectively (p=0.027). Thirty-nine (39) cases in non-shock injuries were conservatively managed while 18 cases in shock injuries were surgically treated. In the shock group, the liver and the kidney were often damaged, as well. Among the shock patients, the average admission period was $7.5{\pm}8.7days$ in intensive care and $55.1{\pm}47.9days$ in total, which were longer than the corresponding numbers of days for the non-shock patients (p<0.05). No deaths occurred in the non-shock group while 5 deaths (14.2%) occurred in the shock group (p=0.007). Conclusion: The factors affecting hemodynamic instability in patients with pelvic bone fracture are injury mechanism, classification of fracture, and associated injuries.

Comparisons of Fracture Types and Pelvic Angiographic Findings in Hemodynamically Unstable Pelvic Bone Fracture (혈역학적으로 불안정한 골반골 골절 환자에서 골반골 골절 소견과 혈관조영술 소견의 비교)

  • Lee, Kwon Il;Lee, Kang Hyun;Kang, Sung Chan;Park, Sung Min;Jang, Yong Su;Shin, Tae Yong;Hwang, Sung Oh;Kim, Hyun
    • Journal of Trauma and Injury
    • /
    • v.20 no.1
    • /
    • pp.26-32
    • /
    • 2007
  • Purpose: Hemorrhagic shock is the leading cause of death in patients with pelvic bone fractures. The majority of blood loss is due to injured pelvic arteries and retroperitoneal veins and to bleeding from the fracture site itself. Pelvic angiography and embolization of injured vessels is an effective way to control continuous bleeding. However, identifying the bleeding focus in hemodynamically unstable patients before diagnostic intervention is difficult. The purpose of this study was to determine the correlation between fracture patterns in hemodynamically unstable patients with pelvic fractures and later pelvic angiography findings. Methods: We performed a retrospective study of 21 hemodynamically unstable patients with pelvic fractures admitted to our emergency department between April 2001 to April 2006. All 21 patients underwent pelvic angiography. Pelvic fractures were assessed according to the Tile's classification and the degree of injury was assessed using the Injury Severity Score (ISS) and Revised Trauma Score (RTS). The hemodynamic status of the patients was defined using vital signs, base excess, and blood lactate. Fracture patterns were compared with hemodynamic status and angiography findings. Results: In the 5year study period, 21 hemodynamically unstable pelvic bone fracture patients were admitted; ten were men (47.6%), and 11 were women (52.4%). The mean age was 41.1 years (range: ${\pm}20.1$). Of the 21 embolization was performed in 6 patient (28.6%): 1 patient of the 5 unstable pelvic bone fracture patients (20%), and 5 patients of 16 the stable pelvic bone fracture patients (31.3%). There were no significant differences between the RTS (p=0.587) and embolization rate (p=0.774) for either the stable patients or the unstable patients. Patients with arterial injury on angiography had a lower RTS compared with patients without arterial injury but there was no significant difference in ISS between the two groups. The angiographic injured sites were five internal femoral arteries and one external femoral artery. Conclusion: The findings in this study suggest that the pelvic fracture pattern in hemodynamically unstable patients with pelvic fractures does not correlate with pelvic angiography findings.