• 한국지구과학회지
• /
• 제33권5호
• /
• pp.377-394
• /
• 2012

To elucidate the mechanism associated with the development of heavy precipitation system, a field experiment was carried out in Jejudo (or Jeju Island) and Marado, Korea from 22 June to 12 July 2006. The synoptic atmospheric conditions were analyzed using the National Centers for Environmental Prediction-National Center for Atmospheric Research's (NCEP/NCAR) reanalyzed data, weather maps, and sounding data. The kinematic characteristics of each precipitation system were investigated by dual Doppler radar analysis. During the field experiment, data of four precipitation events with more than 20 mm rainfall were collected. In F case (frontal precipitation), a typical Changma front was dominant and the observation field was fully saturated. However there was no convective instability near the surface. LF case (low pressure accompanied with Changma front) showed strong convective instability near the surface, while a strong convergence corresponded to the low pressure from China accompanied with Changma front. In FT case (Changma front indirectly influenced by typhoon), the presence of a convective instability indicated the transport of near surface, strong additional moisture from the typhoon 'EWINIAR'. The convergence wind field was ground to be located at a low level. The convective instability was not significant in T case (precipitation of the typhoon 'EWINIAR'), since the typhoon passed through Jejudo and the Changma front was disappeared toward the northeastern region of the Korean peninsula. The kinematic (convergence and divergence) characteristics of wind fields, convective instability, and additional moisture inflow played important roles in the formation and development of heavy precipitation.

• Journal of Ceramic Processing Research
• /
• 제20권5호
• /
• pp.464-469
• /
• 2019

In this study, the electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and polyethylene synthesized by an extrusion process was evaluated. The MWCNTs used exhibited differences in their dispersion characteristics depending on the type of catalyst or synthesis gas used. Thus, the choice of catalyst or synthesis gas significantly affect the physicochemical state of the final MWCNTs and MWCNT-based composites. In this investigation, the characteristics of MWCNTs were analyzed in four cases by introducing ethylene and propylene gas to each catalyst synthesized using deposition precipitation and spray drying methods. The MWCNT-based composites synthesized using the catalyst prepared by deposition precipitation and the ethylene synthesis gas showed the best electrical conductivity. In principle, the morphologies of the MWCNTs indicate that the smaller the aggregate size and bundle thickness, the better the electrical conductivity of the MWCNT composites. This implies that the network is well-formed.

• 대기
• /
• 제33권5호
• /
• pp.457-475
• /
• 2023

Accurately predicting localized heavy rainfall is challenging without high-resolution mesoscale cloud information in the numerical model's initial field, as precipitation intensity and amount vary significantly across regions. In the Korean Peninsula, the radar observation network covers the entire country, providing high-resolution data on hydrometeors which is suitable for data assimilation (DA). During the pre-processing stage, radar reflectivity is classified into hydrometeors (e.g., rain, snow, graupel) using the background temperature field. The mixing ratio of each hydrometeor is converted and inputted into a numerical model. Moreover, assimilating saturated water vapor mixing ratio and decomposing radar radial velocity into a three-dimensional wind vector improves the atmospheric dynamic field. This study presents radar DA experiments using a numerical prediction model to enhance the wind, water vapor, and hydrometeor mixing ratio information. The impact of radar DA on precipitation prediction is analyzed separately for each radar component. Assimilating radial velocity improves the dynamic field, while assimilating hydrometeor mixing ratio reduces the spin-up period in cloud microphysical processes, simulating initial precipitation growth. Assimilating water vapor mixing ratio further captures a moist atmospheric environment, maintaining continuous growth of hydrometeors, resulting in concentrated heavy rainfall. Overall, the radar DA experiment showed a 32.78% improvement in precipitation forecast accuracy compared to experiments without DA across four cases. Further research in related fields is necessary to improve predictions of mesoscale heavy rainfall in South Korea, mitigating its impact on human life and property.

• 대한토목학회논문집
• /
• 제31권3B호
• /
• pp.265-276
• /
• 2011

한반도와 제주를 포함한 전국의 강우 자료와 국가지하수위 관측소에 관측된 지하수위 관측 자료를 수집하였다. 강우와 지하수위의 관계를 분석한 후 강우자료를 이용하여 이동평균을 취한 후 지하수위와의 상관관계를 분석하였다. 또한 유역평균 일최대침투량인 한계침투량을 고려한 후, 강우이동평균과 지하수위간의 상관계수를 산정하였다. 한계침투량 고려시 상관계수가 0.6 이상인 곳을 최종적으로 선정하였고, 선정된 지역의 공통점과 지역 특성에 따른 차이점 등을 비교 분석하였다. 총 26개 지역이 선정되었고 행정구역별로 경기도가 4개소, 강원도가 4개소, 충청도가 5개소, 전라도가 3개소, 경상도가 9개소, 제주도가 1개소이다. 상관계수가 높을수록 강우사상 발생에 따른 지하수위 변동은 뚜렷하게 나타났으며, 강우와 상관없는 요인에 의한 지하수위의 변동이 거의 없는 것으로 나타났다. 본 연구를 토대로 강우 예측 시나리오를 활용한다면 상관계수가 높은 지역에서 지하수위 또한 예측이 가능할 것으로 기대된다.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.331-342
• /
• 2010

Aerosol physical properties have been measured at Pusan National University by using the 16-channel LPC(Laser Particle Counter), and particle characteristics have been examined for the period from Aug. 4 2007 to Dec. 30, 2008. Annual total average, seasonal average, and other averages of the meteorologically classified four categories such as Asian dust, precipitation, foggy, and clear days are respectively described here. Both annually and seasonally averaged number concentration show three peaks at the particle diameter of 0.3, 1.3, and $4{\mu}m$, respectively. However, the first peak for summer season tends to be shifted toward smaller size than other seasons, implying the strong fine particle generation. Meteorological condition shows strong contrast in aerosol concentrations. In Asian dust case, relatively lower number concentrations of fine particles (i.e., smaller than $0.5{\mu}m$) were predominant, while higher concentrations of coarse particles were found particularly for the size bigger than $0.5{\mu}m$. In precipitation day, number concentrations were decreased by approximately 30% due to the removal process of precipitation. Foggy day shows significantly higher concentrations for fine particles, implying the importance of the aerosol condensation process of micro-fine-particle growing to fine-particle. Finally the regressed particle size distribution function was fitted optimally with two log-normal distribution, and discussed the similarities and differences among four categorized cases of the Asian dust, precipitation, foggy, and clear days.

• 대기
• /
• 제23권2호
• /
• pp.187-204
• /
• 2013

This study analyzed the synoptic distribution and vertical structure about four cases of precipitation occurrences using NCEP/NCAR reanalysis data and upper level data of winter intensive observation to be performed by National Institute of Meteorological Research at Bukgangneung, Incheon, Boseong during 63days from 4 JAN to 6 MAR in 2012, and Observing System Experiment (OSE) using 3DVAR-WRF system was conducted to examine the precipitation predictability of upper level data at western and southern coastal regions. The synoptic characteristics of selected precipitation occurrences were investigated as causes for 1) rainfall events with effect of moisture convergence owing to low pressure passing through south sea on 19 JAN, 2) snowfall events due to moisture inflowing from yellow sea with propagation of Siberian high pressure after low pressure passage over middle northern region on 31 JAN, 3) rainfall event with effect of weak pressure trough in west low and east high pressure system on 25 FEB, 4) rainfall event due to moisture inflow according to low pressures over Bohai bay and south eastern sea on 5 MAR. However, it is identified that vertical structure of atmosphere had different characteristics with heavy rainfall system in summer. Firstly, depth of convection was narrow due to absence of moisture convergence and strong ascending air current in middle layer. Secondly, warm air advection by veering wind with height only existed in low layer. Thirdly, unstable layer was limited in the narrow depth due to low surface temperature although it formed, and also values of instability indices were not high. Fourthly, total water vapor amounts containing into atmosphere was small due to low temperature distribution so that precipitable water vapor could be little amounts. As result of OSE conducting with upper level data of Incheon and Boseong station, 12 hours accumulated precipitation distributions of control experiment and experiments with additional upper level data were similar with ones of observation data at 610 stations. Although Equitable Threat Scores (ETS) were different according to cases and thresholds, it was verified positive influence of upper level data for precipitation predictability as resulting with high improvement rates of 33.3% in experiment with upper level data of Incheon (INC_EXP), 85.7% in experiment with upper level data of Boseong (BOS_EXP), and 142.9% in experiment with upper level data of both Incheon and Boseong (INC_BOS_EXP) about accumulated precipitation more than 5 mm / 12 hours on 31 January 2012.

• 통합자연과학논문집
• /
• 제1권2호
• /
• pp.89-114
• /
• 2008

Interrelationship between heavy rainfalls and related with low-level jets(LLJ) is analyzed by using fifty cases of heavy rainfall events occurred over the Korean peninsula from 1992 to 2001. Those cases are classified with four synoptical features. There are 32% chances that the low pressure exist in heavy rainfall over than 150 mm per day case by case. Secondly Changma front and front zone account for 28% of all cases. The ratio of marine tropical boundary type and trough type record 22% and 18% respectively. The moist and warm south-westerly winds associated with low-level jets have been induced convective instability and baroclinic instability. Therefore, heavy rainfall due to the approach of a low pressure occurred at September and before Changma. During the period of Changma, this type has been happened heavy rainfall when low pressure and stationary front has vibrated south and north. Changma type has longer the duration time of precipitation than other types. Third type, located with marine Tropical boundary, have mainly rained in August and September. The last trough case locally downpoured in short time with developing cell. The occurrence low-level jets related to heavy rainfall has increased over 12.5 m/s wind speed. The result is that 43 heavy rainfalls out of 50 cases reach peak at the time of maximum precipitation intensity. Also, the variation of wet number and K-index corresponded with the variation of wind speed. It is found that the number of frequency of low-level jets with southwestward direction has been increased and these jets are mainly passed from the southwest toward to the northeast of the Korean peninsula in that time.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.735-742
• /
• 2019

가뭄은 영향을 받는 인자에 따라 체감정도가 달라지는 사회적 현상으로 기후학적 가뭄, 기상학적 가뭄, 농업적 가뭄, 수문학적 가뭄 등 다양한 상대적 개념으로 정의되고 있다. 본 연구에서는 다양하게 정의되는 가뭄 중에서 기상학적 가뭄을 나타내는 지수에 대한 비교 분석을 실시하고자 하였으며, 실제 과거 가뭄사례와 기상학적 가뭄지수 분석결과의 비교를 통하여 가뭄지수의 적용성을 검토하고자 하였다. 가뭄지수의 비교를 위하여 기상학적 가뭄을 판단하기 위해 일반적으로 가장 많이 사용되는 SPI (Standardized Precipitation Index)와 일반적으로 사용되지는 않지만 강수량만을 이용하여 가뭄분석이 가능한 CZI (China-Z Index), MCZI (Modified CZI), ZSI (Z-Score Index) 지수를 이용하였다. 대상지역으로는 최근까지도 가뭄이 발생하였던 태백과 속초지역을 대상으로 선정하였으며 1986년부터 2015년 기상 자료를 이용하여 지속시간 3개월로 가뭄지수 분석을 실시하였다. 분석 결과 SPI 가뭄지수가 과거 제한급수발생 가뭄사례에 대하여 높은 재현성을 나타내는 것으로 분석되었으며 CZI와 MCZI 가뭄지수의 경우 Extreme Dry 발생 횟수는 과거사례와 유사하나 실제 가뭄이 발생했던 년도에 대해서는 낮은 재현성이 나타났다. ZSI 가뭄지수의 경우 발생횟수, 과거사례와의 비교 모두 재현성이 떨어지는 것으로 분석되었다. 가뭄지수의 비교결과 강수량을 이용한 기상학적 가뭄지수의 경우 과거 가뭄사례와 가장 높은 재현성을 보이는 SPI 가뭄지수를 이용하는 것이 효과적일 것으로 판단된다.

• 한국대기환경학회지
• /
• 제29권2호
• /
• pp.135-151
• /
• 2013

This study has been carried out to analyze the sensitivity of ozone concentrations by employing different options of cumulus parameterization schemes (CPSs) and microphysics schemes in MM5 models. These sensitivity tests were applied to long-range transport case of higher ozone over Northeast Asia. Employed CPS schemes are Betts-Miller (BM), Grell (GR), Kain-Fritsch2 (KF2), Anthes-Kuo (AK), None scheme (grid scale physics only), and four microphysics used here are Simple ice, Reisner1, Reisner2, Schultz scheme in MM5. We chose two cases of high ozone long range transport case by employing both concentrations ozone level and backward trajectory model. The results showed that modeled ozone concentrations indicated about 10% differences among CPSs. Of the all options, GR and KF2 (for CPS), and Rersiner-1 and Resiner-2 (for microphysics) showed relatively good and stable variations against ensemble mean values. For both CPS and microphysics schemes, the difference of precipitation arising from different parameterization schemes was significant by itself, but the resultant ozone variations showed only marginal. But the cloud fraction differences arising from different parameterization schemes showed better correlation with ozone variations than precipitation differences, indicating that the photochemical ozone generation variations is more dominant by cloud fraction than wet removal process for high and long-ranged transported ozone cases over Northeast Asia.

• 한국재료학회지
• /
• 제12권7호
• /
• pp.580-586
• /
• 2002

The effect of processing and designing variables such as pouring temperature(1400 or $1500^{\circ}C$), inoculation and risering design(T and H type) on the formation of defects such as external depression, primary and secondary shrinkage cavities in GC150 gray cast iron was investigated. In T type risering design, external depression or primary shrinkage cavity due to liquid contraction was formed in all of the eight cases. Regardless of its modulus value, the riser could not function properly in T type risering design because directional solidification was not promoted toward the riser. On the other hand, the four cases of H type risering design in which thermal sleeves were set onto the risers produced defect-free castings. In both types of the risering designs, secondary shrinkage cavity caused by solidification contraction was not observed in the casting because of the expansion pressure due to graphite precipitation and the application of rigid pep-set mold. The degree of external depression or primary shrinkage cavity was reduced with lowered pouring temperature. The effect of inoculation was diminished because of the high carbon equivalent of GC 150 gray cast iron.