• Journal of The Korean Association of Information Education
• /
• v.10 no.3
• /
• pp.315-325
• /
• 2006

As a substitute for preventing school violence, the reward and punishment system has some problems such as different imposition basis for each teacher, ambiguity of applicable items, and difficulties in directing students in relation to parents of students. In this thesis, a reward and punishment points management system is implemented based on the web to solve the problems. The week point of the current system is complemented by separating the system into four parts, operating each part that is operated by administrators, teachers, students and their parents respectively and sharing their data. In addition, as each group of administrators, teachers, students and their parents is organically connected to the system, when special problems occur, the problems can be solved effectively. Therefore, if the implemented system is used in the field, the guidance of human nature is naturally conducted by understanding broadly for student's living guidance. Furthermore, it can be helpful to prevent students from school violence in advance.

• Journal of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.67-75
• /
• 2000

It was well recognized that the damages associated mainly with the aging of civil infrastructures were one of very serious problems for assurance of safety and reliability. Recently carbon fiber sheet(CFS) has been widely used for reinforcement and rehabilitation of damaged concrete beam. However, the fundamental mechanism of load transfer and its load-resistant for carbon fiber sheet reinforced concrete are not fully understood. In this study, three point bending test has been carried out to understand the damage progress and the micro-failure mechanism of CFS reinforced mortars. For this purpose, four different types of specimens are used, that is, mortar, steel bar reinforced mortar, CFS reinforced mortar, and steel bar and CFS reinforced morter. Acoustic Emission(AE) technique was used to evaluate the characteristics of damage progress and the failure mechanism of specimens. in addition, two-dimensional AE source location was also performed to monitor crack initiation and propagation processes for these specimens.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.77-78
• /
• 2010

As the maximum power operating point(MPOP) of photovoltaic(PV) power systems alters with changing atmospheric conditions, the efficiency of maximum power point tracking(MPPT) is important in PV power systems. Moreover, grid-connected PV system occurs some problems such as voltage inequality and harmonics. Therefore, this paper presents the results of a grid-connected PV system modeling by PSIM simulator and investigates the influence on the grid-connected PV system from aspect of power quality, i.e. voltage drop. This paper includes four MPPT algorithms; Perturbation & Observation(P&O), Improved P&O, Increment Conductance(Incond), Hysterisis simulated with irradiation changing.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.443-452
• /
• 1998

The future water quality of Youngwol Dam was predicted using FEMWASP. In the this study, point and non-point source in the basin was investigated in detail, and future pollutant loading was computed by various prediction technique. The water quality of 29 sites was analyzed over four seasons. FEMWASP was used to predict future water quality of Youngwol lake and downstream of proposed dam. Future water quality of Youngwol lake was predicted to configure eutrophication status, management criteria was suggested to minimize the pollution problems coming from future eutrophication. Discharge rate of dam was decided as 30CMS to conserve the water quality, and overall design of dam was changed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12C
• /
• pp.984-994
• /
• 2010

Pose variation is a critical problem in face recognition. Three-dimensional(3D) face recognition techniques have been proposed, as 3D data contains depth information that may allow problems of pose variation to be handled more effectively than with 2D face recognition methods. This paper proposes a pose-normalized 3D face modeling method that translates and rotates any pose angle to a frontal pose using a plane fitting method by Singular Value Decomposition(SVD). First, we reconstruct 3D face data with stereo vision method. Second, nose peak point is estimated by depth information and then the angle of pose is estimated by a facial plane fitting algorithm using four facial features. Next, using the estimated pose angle, the 3D face is translated and rotated to a frontal pose. To demonstrate the effectiveness of the proposed method, we designed 2D and 3D face recognition experiments. The experimental results show that the performance of the normalized 3D face recognition method is superior to that of an un-normalized 3D face recognition method for overcoming the problems of pose variation.

• Asian Journal of Innovation and Policy
• /
• v.8 no.3
• /
• pp.417-427
• /
• 2019

This article puts forward the opinion of a policy expert, who had been involved in Korea's science and technology policy for 30 years, about technology policy for SMEs. This article first explains why technology policies for SMEs are needed, and from what point of view. The next section looks at the current problems facing Korean SMEs, followed by the introduction of past and current polices to support SMEs. The comparison between current issues facing SMEs and past and current policies leads to lessons that can be learned. There are four lessons for the policy itself and three for the implementation of these policies. As for policy, the first four are about stages of development, concentration, R&D and diffusion, and policy mix. The latter three are policymakers, institutional building, and cooperation between ministries. This article makesfour suggestions for future policy: the importance of startups' culture, cooperation with others, infrastructure to reduce uncertainty, and policy monitoring and evaluation.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.11 no.1
• /
• pp.7-14
• /
• 2005

The existing six-bed patient rooms, general type of multiple-bed rooms in Korea causes many problems for the amenity of patients. We should reconsider their inconvenience carefully and try to provide the right to keep their privacy and enjoy amenity. The number of patients of multi-bed rooms is very critical point to improve the environmental condition of the patient rooms. So This paper aims to provide the possibilities of four-bed rooms through the comparison and analysis of six and four-bed room for planning and design.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.60-67
• /
• 2017

A baggage handling system (BHS) in airport is an unified system for moving the passengers' baggage in designated time. Input baggage from the check-in counter travels to the baggage claim area or cargo handling terminal through this system. In particular, entryway BHS consists of conveyors, X-ray and sorters such as tilt-tray to send the baggage to departing airplane and it could have various problems for handling certain amount of baggage in restricted time such as baggage jamming at certain merge point. This causes systemic error such as delay of the time, omissions of the baggage and even breakdown of the equipment and inefficiency. Also the increasing maximum time of the baggage passing through the BHS could delay the flight schedule and finally decrease the service level. Thus, the algorithm for controlling the flow of the merge is essential to the system. The window reservation algorithm is the one of the most frequently used methods to control the merge configuration. Above all, the reserve location, so called reserve ahead point, that allocates the window is important for the performance of the algorithm. We propose the modified window reservation algorithm and the best reserve locations by changing the reserve ahead point in the induction conveyors. The effect of various reserve ahead points such as the capacity and utility of the system were analyzed and the most effective reserve ahead point combination was found. The total baggage processing time and the utilization of the tilt-tray are properly considered when choosing the optimal Reserve ahead point combination. In the layout of this study, the configuration of four conveyors merged into one tilt-tray is studied and simulation analysis is done by AutoMod(R), 3D simulation software. Through the simulation, the window reservation algorithm is effectively operated with the best combination of reserve ahead point which reduces the maximum baggage travel time.

• Nutrition Research and Practice
• /
• v.4 no.2
• /
• pp.163-172
• /
• 2010

The purposes of this study were to assess hospital foodservice quality and to identify causes of quality problems and improvement strategies. Based on the review of literature, hospital foodservice quality was defined and the Hospital Foodservice Quality model was presented. The study was conducted in two steps. In Step 1, nutritional standards specified on diet manuals and nutrients of planned menus, served meals, and consumed meals for regular, diabetic, and low-sodium diets were assessed in three general hospitals. Quality problems were found in all three hospitals since patients consumed less than their nutritional requirements. Considering the effects of four gaps in the Hospital Foodservice Quality model, Gaps 3 and 4 were selected as critical control points (CCPs) for hospital foodservice quality management. In Step 2, the causes of the gaps and improvement strategies at CCPs were labeled as "quality hazards" and "corrective actions", respectively and were identified using a case study. At Gap 3, inaccurate forecasting and a lack of control during production were identified as quality hazards and corrective actions proposed were establishing an accurate forecasting system, improving standardized recipes, emphasizing the use of standardized recipes, and conducting employee training. At Gap 4, quality hazards were menus of low preferences, inconsistency of menu quality, a lack of menu variety, improper food temperatures, and patients' lack of understanding of their nutritional requirements. To reduce Gap 4, the dietary departments should conduct patient surveys on menu preferences on a regular basis, develop new menus, especially for therapeutic diets, maintain food temperatures during distribution, provide more choices, conduct meal rounds, and provide nutrition education and counseling. The Hospital Foodservice Quality Model was a useful tool for identifying causes of the foodservice quality problems and improvement strategies from a holistic point of view.

• Journal of The Korean Association For Science Education
• /
• v.26 no.4
• /
• pp.502-509
• /
• 2006

The purpose of this study was to analyze physics problem solving processes according to students' cognitive style in the area of 'Force and Motion' at high school level. Students who have already learned t e area of 'Force and Motion' during the first semester of the 10th grade have taken physics test and cognitive style test to choose students who have basic knowledge of physics and reflective or impulsive style. Four students who got over 19 points in the cognitive style test were selected as reflective students, and another four students who got below 12 points were selected as impulsive students. After explaining the purpose and procedure of this study, think-aloud method was introduced to the students, and the students practiced it. After that, the students solved three quantitative and qualitative problems each. Then, the questionnaire on the belief system on physics and physics problem solving and prerequisite knowledge test were also administered. By recording the students' problem solving processes, protocol was made and analyzed. After solving the problems, the students expressed their confidence, intimacy, and preference on each problem by the five point Likert scale. Impulsive students tended to succeed in solving more problems, less intimate, and more spontaneous and positive in seeking alternative solution when confronted with unacquainted problems. On the other hand, reflective students used more time in executing the problems even without planning, and used more time in solving problems and verification. Whether making effective plan or not was important rather than how much time they used in the planning step. In addition, repeating steps were more likely shown to impulsive students; they tended to be attached to their first idea.