• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.93-98
• /
• 2011

A photovoltaic/thermal(PVT)collector produces both thermal energy and electricity simultaneously. The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. A PVT module is a combination of PV module with a solar thermal collector which forms one device that converts solar radiation into electricity and heat. In general, there are two different types of PVT module: glazed PVT module and unglazed PVT module. On the other hand, two types of the PVT module can be distinguished according to absorber on PV module rear side: the sheet-and-tube absorber PVT module and the fully wetted absorber PVT module. The absorber collector plays an important function in PVT system. It cools down the PV module, while collecting the thermal energy produced in the form of hot water. The aim of this study is to compare the electrical and thermal performance of two different PVT collectors, one with the rectangular tube and the other with fully wetted absorber PVT collectors. For this paper, the PVT collectors with two different types of thermal absorber were made, and both the thermal and electrical performance of them were measured in outdoor, and the results were compared. The experimental results were analyzed that the thermal efficiency of the fully wetted absorber PVT collector is about 8.7% higher than the sheet-and-tube absorber PVT collector, and for the electrical efficiency, the fully wetted absorber PVT collector had about 7% higher than the rectangular tube absorber.

• Journal of the Korean housing association
• /
• v.25 no.4
• /
• pp.39-46
• /
• 2014

This research was for the investigation and analysis of the illustration of modular construction application which is different use by each school facility since modular construction related examples are rare in domestic situation, and it has a limitation because of its being basic research material for generating the basic form of modular construction. The research results are as followings. First, in case of school facility from illustration investigation results, module measurement of class modulation is as similar as $3m{\times}10m$, but in resident facility the planning of more flexible plane shape can be possible since modules of 6 cases are free and various, and facade form of various types can be appeared by combination of module unit. Second, as a result of the generated characteristics in compared analysis of representative examples, school facilities were highly indicated for movability and duration reduction areas, and the flexibility, economic efficiency, and environment-friendliness was indicated low relatively. Third, the basic planning types of modular construction can be largely divided into layered type, horizontal (straightway) type, and compound type. The layered type has a short traffic line and facility system and is appropriate for the low-rise form unless separate construction method is used since it is susceptible to load. The horizontal type is advantageous for securing an opening since it has wide extent in light but has a long traffic line and facility system. Finally, the compound type can be possible for planning of various forms but needs the combination of various unit modules and traffic line and facility plan for it can be difficult.

• Journal of the Korean Society of Costume
• /
• v.60 no.9
• /
• pp.95-105
• /
• 2010

The purpose of this study is in allowing thinking about the design development process which is more towards the visual and perceptional aspects related to the form structure by more diverse methods by typology of idea generation. To accomplish such goal, researches in the psychology, pedagogy, engineering, and consilient studies as well as related precedent researches and reference data in architecture, promotion, industrial design, and other art fields and fashion designs are collected and analyzed to see the study trend. In addition, in the content analysis method based on such, the idea generation was classified into types in consideration of relevancy, usefulness, and suitability with fashion. First, a concentrated thinking of a limited space is a method of leading an optimal design by focusing on solving the cause of a problem within a space which generates the problem. Second, plan thinking per section of structure decomposition is a method of dismantling the design problems per organization, thinking type, factor, and characteristic into sub-modules to re-interpret and re-organize the problems in various aspects. Third, an associated thinking through interpreting relationships among vocabularies is a method of selecting the marginal languages that allow a person to come up with concrete forms and the key words related to fashion to import the characteristics and attributes of the marginal languages and thematic relationship between the two terms to search the relevancy. Lastly, the free integrated thinking of language extension is a method of groping integration between other fields and fashion by free integration among the extended terms by extending the vocabularies through inferring metaphorical expressions founded upon individual's memories or knowledge concepts regarding theme words that do not allow concrete forms to come up.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.71-78
• /
• 2021

Purpose: It is important to plan the ward module at a time when the size of beds, the floor area, and the construction budget are all set prior to the hospital design. In this context this study aims (1) to derive various factors affecting the ward module, and (2) to analyze the appropriate room module according to the type. Methods: Design factors related to hospital modules are derived through precedential studies, and the types of ward elevation are classified by reviewing the drawings of 18 case hospitals. And the detailed dimensions and area of the derived elements are analyzed. Results: The X-axis modules of the ward are switched to long span structural columns of 9.9 m, 12.6 m and 13.2 m, but the ward modules still represent 6.6 m. The Y-axis module of the ward shows a dimension of 9 to 9.9m in the process of changing a multi-person room into a four-person room. Type A of curtain wall with columns located on the wall of the room and type B of curtain wall located in the center of the room are analyzed due to their variations. The square window type, which forms the elevation of the square window by exposing the columns to the elevation, and the outframe type, which protrudes from the structural columns and beams, have elevation designs limited. There are, however, no obstacles to the interior space of the hospital room, so the wall composition and furniture arrangement are expected to be free. The ward area of Curtain Wall Type A, which can secure an effective area of 5.9m*5.0m, are 52.1m². The Curtain Wall Type A, Square window type, and the outframe type are 49.8m². Implications: As part of the hospital standard module plan for economical and reasonable hospital building planning, a type was proposed in this study in conjunction with the external design. It is hoped that it be a base for standard module research linked together to the Central Treatment department, Outpatient department and underground parking lot.

• Journal of Korean Philosophical Society
• /
• v.131
• /
• pp.353-381
• /
• 2014

"The four types of temperament" (hereinafter "Sa-Sang Constitutional Medicine") is applied to not only medicine, but also various fields like management, politics, education, etc. Despite that "Sa-Sang Constitutional Medicine" is "Mind-Body Medicine" which is fundamentally based on "Controling Mind and Body", though, it was rarely used for psychotherapy in practical. Practical treatment on clinical medicine is limited to only medicine-treatment or acupuncture-therapy. However treatment on illness and pathological phenomenon suggested by "Sa-Sang Constitutional Medicine" keeps individual's nature in control, and it governs environmental facts: age, region, and socio-cultural factors: alcohol, debauchery, riches, authority(酒 色 財 權). Especially, "Moral Cultivation" in "Sa-Sang Constitutional Medicine" emphasizes the importance of properly understanding vice(邪心) and laziness(怠行) concealed in natural temperament of human being, and pursuing "Understanding Each Other(博通)" and "Upright Conduct by Oneself(獨行)". Furthermore, because "Sa-Sang Constitutional Medicine" is developing medical theory based on "Understanding Others(知人)" and "Straighten Oneself(正己)" doing try integral approach, it has great implications for the present generation that forms much of social connection. Similarly, Ken Wilber who is one of representatives of "World Philosophy" and "Integral Psychology" is suggesting "Integral Life Practice" (hereinafter ILP) - applies practical and heuristic "Integral Approach" to individual experiences. ILP is the only practical discipline for development of viable whole-area. ILP says that there are four core modules: body, mind, shadow, spirit(靈), and five auxiliary modules: morals(倫理), gender(性), work(일), emotion(情緖), relationships(關係性). These nine modules could apply mind-body treatment of "Sa-Sang Constitutional Medicine", and thereby more developed mind-body treatment would be found.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.179-200
• /
• 2015

Recent national policies National Competency Standards(NCS) to develop teaching-oriented education in the field of industry and learning is taking place. Plan to take advantage of the Internet and multimedia classes, information and communication technology (ICT) for ways to leverage the integration appearing in various forms. The purpose of this study is causal influence on the ARCS motivation theory can determine the basic psychology of human motivation factors and the desires of a typical human nature theory dealing with the psychological needs of interactivity and immersion is learning achievement and learning transfer and to validate the demonstration. By applying information and communication technology sector in the development of learning in information and communication equipment training program modules from a field study conducted at the NCS with a clear empirical and empirical research through the synchronization to the learner and to explore the possibility of generalization.

• Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.157-175
• /
• 2007

The membrane biofilm reactor (MBfR) creates a natural partnership of a membrane and biofilm, because a gas-transfer membrane delivers a gaseous substrate to the biofilm that grows on the membrane's outer wall. $O_2$-based MBfRs (called membrane aerated biofilm reactors, or MABRs) have existed for much longer than $H_2$-based MBfRs, but the $O_2$-based MBfR is a versatile platform for reducing oxidized contaminants in many water-treatment settings: drinking water, ground water, wastewater, and agricultural drainage. Extensive bench-scale experimentation has proven that the $H_2$-based MBfR can reduce many oxidized contaminant to harmless or easily removed forms: e.g., ${NO_3}^-$ to $N_2$, ${ClO_4}^-$ to $H_2O$ and $Cl^-$, ${SeO_4}^{2-}$ to $Se^0$, and trichloroethene (TCE) to ethene and $Cl^-$. The MBfR has been tested at the pilot scale for ${NO_3}^-$ and ${ClO_4}^-$ and is now entering field-testing for many of the oxidized contaminants alone or in mixtures. For the MBfR to attain its full promise, several issues must be addressed by bench and field research: understanding interactions with mixtures of oxidized contaminants, treating waters with a high TDS concentration, developing modules that can be used in situ to augment pre-denitrification of wastewater, and keeping the capital costs low.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.204-214
• /
• 1998

The existing tutoring estimation systems using the authoring tools or HTML forms on the Web environment don't have been improved inconvenient factors of uni-directional interactive systems. In this paper, we design and implement the interactive tutoring estimation system which is conveniently considered to user on the internet environment. The proposed system is divided into teacher and student modules, which have the functions of the new problem insertion and deletion in database, regular examination marking for the former and lecture/test selection, scoring look, etc for the letter. The environment of server system in this thesis is implemented using the IDC file and SQL database for internet access based on Windows NT, client systems are composed to Windows 95 environment based on Explorer or Netscape to access for interactive tutoring systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.7
• /
• pp.961-969
• /
• 2004

Most manufacturing companies are trying to develop a competitive product by increasing the quality, shortening time to market and reducing the cost of a product. Collaborators related to the development of a new product want to confirm geometric forms and dimensions during the design process, as well as to verify dimensional errors of a product during the fabrication process. Objective of this paper is the development of a collaborative design and dimension verification system on the Internet. STEP files obtained from the design process are used for the design and dimension verification. Functions of the design and dimension verification modules are constructed over the ActiveX control using the visual C/sup ++/ and OpenGL. By using mark up functions over the Internet, collaborators check geometries, interferences, dimensional errors, human factors and form errors, as well as share their design ideas and opinions with XML rapidly and remotely. The usefulness of the developed system is confirmed through case studies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.19-19
• /
• 2011

The appraisals of hydrology model behavior for flow and water quality are generally performed through comparison of simulated data with observed ones. To perform appraisal of hydrology model, some criteria are often used, such as coefficient of determination ($R^2$), Nash and Sutcliffe model efficiency coefficient (NSE), index of agreement (d), modified forms of NSE and d, and relative efficiency criteria NSE and d. These criteria are used not only for hydrology model estimations also for various comparisons of two data sets; This NSE has been often used for SWAT calibration. However, it has been known that the NSE value has some limitations in evaluating hydrology at watersheds under monsoon climate because this statistic is largely affected by higher values in the data set. To overcome these limitations, the SWAT auto-calibration module was enhanced with K-means clustering and direct runoff/baseflow modules. However the NSE is still being used in this module to evaluate model performance. Therefore, the SWAT Auto-calibration module was modified to incorporate alternative efficiency criteria into the SWAT K-means/direct runoff-baseflow auto-calibration module. It is expected that this enhanced SWAT auto-calibration module will provide better calibration capability of SWAT model for all flow regime.