• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.661-668
• /
• 2008

This study was conducted to provide the policy information on implementing forestry mechanization through analyzing the project results and policy effectiveness. Study method adopted LISREL (Linear Structural Relationships) model which is the covariance structural equation model. Data was collected by questionnaires on the executors who are actually executing the forestry mechanization project. The analysis results on project outcome, policy satisfaction, and education and training showed the average. But the policy consistency, the consolidation of law and system and the spreading of forest machines showed bellow the average. Therefore, it is necessary to implement the consistent policy through the consolidation of law and system, and to increase the spreading ratio of forest machines in the forestry mechanization. In forestry mechanization project, the policy basis, the spreading of forest machines, and the education and training showed the positive affect on the policy outcome, respectively. The policy outcome had the positive affect on policy satisfaction. Accordingly, although the forestry mechanization policy system is important, it is necessary to spread the forest machines and to increase the training and education of operators for the successful forestry mechanization in the future.

• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.127-134
• /
• 2016

This study is conducted to get current state of data collection and utilization of the trees damaged by pine wilt disease, and to efficiently collect and utilize of the trees damaged by the pine wilt disease and abandoned fumigation-treated trees at forecasts. The method to control pine wilt disease damaged area is mostly fumigation treatment system, and there is no collection and utilization of damaged trees because of absence of efficient collection system, lack of collection cost, and absence of policy, etc. A survey is conducted that asked about the satisfaction degree for the trees damaged by pine wilt disease collection and use divided into 6 topics. It was positively recognized that the need and problem of the trees damaged by pine wilt disease, and results and satisfaction of forestry mechanization while it was mostly negatively recognized that the policy satisfaction for prevention and collection, satisfaction of collection and use, collection and forestry mechanization, and satisfaction of foundation equipment for forestry mechanization, etc. As a result of path analysis, it is necessary to promote a high-tech forestry mechanization to improve satisfaction level of results and satisfaction of forestry mechanization for the trees damaged by pine wilt disease collection and utilization, it is also need to make an effort in various ways for improve satisfaction level of satisfaction of collection and utilization.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.607-614
• /
• 2015

This study aims to analyze the current status of timber production operation and the effects of the forestry mechanization projects on timber production. In order to increase the domestic timber production, it is necessary to propel forestry mechanization project, improve policy and institution, broaden forest-road network, enlarge the number of forest workers, enhance timber production and supply system, provide forestry machines, establish forest operation system, and train forest workers. In addition, the reestablishment of policy goals, the consistency of policy, and the rearrangement of laws and institution are considered more important. To improve the results and effects of forestry mechanization project, it is necessary to drive of forestry mechanization project, the spread of forestry machines, the cultivation of trainer ability, the development of training materials, and the teaching of field skill. In order to meet timber buyersí preference, timber needs to be produced through whole tree logging operation system. Expanding the proportion of domestic timber among total timber demand in Korea requires price competitiveness, and the supply ability of high quality product from the perspective of length and width.

• Journal of Forest and Environmental Science
• /
• v.23 no.2
• /
• pp.109-118
• /
• 2007

This study was conducted to provide the fundamental data of the policy plan for the security of forestry labour and the revitalization of forestry mechanization by analysing the status of forestry labor and the training plan. In forestry, the total number of employer and the labour cost have slightly increased annually, but the number of employer for timber harvesting has decreased. Therefore, the organization of expert forestry mechanization unit and the training of operator will be necessary. The number and person of forest management unit, the working days of the year and income have increased in Korea. However, the working days per month of forest management unit were only 15 days, which are only 180 days per year. In the results of the calculated number and person of forest management unit for the Korean forest tending volumes, about 349 forest management units are required. In case of adjusting 12 persons per 1 unit, 4,185 persons are required. In calculated results of the optimum forestry mechanization unit and member's number by the adjusting of tower yarder harvesting system for annual timber harvesting production volume, it was known to necessary the 250 forestry mechanization unit and the 1,250 members which are calculated at 5 persons per 1 group.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.139-147
• /
• 1993

The rapid industrial growth, the consequent shortage of farm labour and increase in their wage level have facilitated more capitalized agricultural mechanization pattern in Korea. The efficiency of capital intensive machine is highly dependent on farm land structure. This paper describes a model explaining the relationship between farmland structure and required inputs for machine operation and to estimate required inputs for machine operation on the national basis for Korea for its paddy production system. The machine cost is closely related to operation area, but the required labour-hours are more related to machine type adopted . From the technology introduction point of view, if capital intensive machine is introduced, less labour-hours are required but machine kW-hours increase rapidly. From the plot geometry point of view, on good geometry plots, machine kW-hour and labour-hour required are less than that on the poor geometry plots. The kW-jhour per hectare of mechani al energy input id better indicator of mechanization level than kW per hectare or number of machine. If the adopted technology is more capital intensive and plot geometry is good, the cost reduction effect is highly significant.

• Journal of Environmental Science International
• /
• v.29 no.2
• /
• pp.155-166
• /
• 2020

This study was conducted to analyze the current situation of the logging operation system and to suggest an effective policy plan to secure important raw materials for the use of forest biomass. The dissemination of forestry mechanization and the establishment of the logging operation are important tasks to establish a system and reduce costs of timber production by increasing the use of forest biomass; this includes increasing the supply of timber for domestic products and increasing the production of wood chips and wood pellets. In particular, the efficiency of steep-slopes catenary system machinery for yarding such as tower-yarder and swing-yarder should be urgently supplied to cope with forest production and supply of forest biomass energy resources. In addition, it is necessary to continuously promote the dissemination of high-performance forestry machinery as is being done in Japan. At the same time, instead of distributing or retaining the spread of forestry machinery to the state and local governments, it is necessary to distribute timber production work centered on forest cooperatives or private timber producers to be carried out by wood producers, forest cooperatives and individuals.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.93-97
• /
• 2016

Purpose: Grain slurry diet are described as food obtained from ground grain paste. They serve as highly nutritious food for both adults and infants in Nigeria because of their immense nutritive and economical value. However, the production of these grain slurry diets is confronted with challenges that have hampered their commercialization. This study examines the trends and constraints of grain slurry food processing in Kaduna State. Methods: A survey was conducted using a structured questionnaire to elicit information from 192 selected processors, including both men and women. The survey was structured in line with the study objectives. The information was collated and synopsized into frequency distribution. Results: These findings revealed that 80% of the respondents processed between 1.0 tons and 13.0 tons of grain slurry per month. More than 90% of the processors processed grain slurry into koko, kunu, agidi, and pito. Accordingly, 80% of the interviewed processors indicated that sieving is one of the major constraints. Furthermore, inadequate modern machinery required to perform this operation makes it highly discouraging. One of the major challenges faced by the grain slurry producers in Nigeria is the lack of processing machinery for most operations (39.1%), followed by the tedious processing nature (27.1%), high labor cost (18.1%), and lack of market (9.4%). The traditional method of grain slurry processing was more popular than using modern equipment, except milling (96.5%), which is the only mechanized unit operation in grain slurry processing. Conclusion: Grain slurry processing and marketing were found to be profitable. However, these limitations could extremely reduce the level of grain slurry production, processing, and economic returns, thereby affecting the general wellbeing of the processors. The study also raised concerns about the safety and hygiene associated with traditionally processed grain slurry diets in the investigated areas.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.450-458
• /
• 1997

It is inadequate to compare operating costs between some logging machines with a low rate of utilization of them except the effect of operating time. The operating volume to maximize the utilization of the logging machines is different from each other, thus it is important to choose the proper logging machines and operating system according to the size of logging management. This study presents one of the methods to choose the economical optimum logging machines according to the operating volume to promote the economical efficiency of the machines. In order to go ahead with the Korean forestry mechanization plan, it should be considered which machine or operating system has the economical priority and if it can be suitable to the effect of wage increment.

• Journal of Korean Society of Forest Science
• /
• v.94 no.3 s.160
• /
• pp.153-160
• /
• 2005

This study was analyze the performance of Forest Work Team from 1999 to 2003. Following recommendations were come up by reviewing the performance of Forest Work Team. The volume of forest works should be increased in order to supply the constant daily work. This would provide the increase of their salary and maintain their salary and maintain their livelihood. The Forest Work Teams should be the members of registered business with highly trained manpower. Qualified Work Team should have extra financial incentive by comparing with general forest workers who did not have adequate skills. The percentage of the certified forest workers should be increased by providing the technical training. To increase the efficiency of forest work, the forest mechanization should be accomplished and the training of forest mechanization had to be offered regularly for the forest workers, and provided them with an education allowance.