• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.301-304
• /
• 1999

In general, printed antennas have a narrow bandwidth characteristic and many people want to find out the method of bandwidth improvement through complicated procedure. So we want to reform the conventional printed antenna characteristic by using the folded dipole's superiority to unit dipole. But it is hard to feed thr printed folded dipole antenna, we use the CPW, which is widely used in microwave IC or MMIC applications and have many advantage to the conventional microstrip line, to feed the folded slot antenna. It is confirmed that the improvement in the bandwidth characteristic of CPW fed folded slot antenna, as much as 20%, through the measurment of designed and implemented antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.9 s.112
• /
• pp.845-851
• /
• 2006

Folded lines are applied to design a compact microstrip ring hybrid. Using the proposed structure we achieve both significant size reduction and good harmonic suppression with the same results of conventional ring hybrid at 2.41 GHz. Including the third harmonic frequency, up to 11 GHz band harmonics are suppressed to -20 dB. The size of the proposed ring-hybrid is reduced to one forth of the conventional ring hybrid. The measured frequency responses agree well with simulated ones.

• The Research Journal of the Costume Culture
• /
• v.8 no.6
• /
• pp.915-929
• /
• 2000

As a result of research, the character of the general dress-costumes from the late 17th century to the early 18th century in Genre Paintings of DuSeo Yun and YoungSeok Cho is as follows. Firstly young women wore braided hair at the back of head and married women wore hair in the style of Unjeun-mori with Gache. The length of Jeogori (Korean traditional jacket) covered waistor shortened to waist length. The width of Jeongori was suitable, because side-seam line was straight or oblique as it comes into inner line. The width of Git was enough and Mokpan-git (shape of board) and Kal-kit (shape of knife) appeared, and sometimes used other color fabric. Sleeve was narrow and ostly folded up. Chima (Korean traditional skirt) used darker color fabric than Jeogori and the width of Chima was narrow and its length was short. Sokbaji (Korean traditional underpants) shown below were narrow and its end narrower. They were barefoot or they wore Hye (Korean traditional shoes) after putting on Beoseon (Korean traditional socks). Secondly general man's hair tie a topknot (sangtu) and put on headdres, 'Bang-lip', 'Mang-geon', hairband, 'Tang-geon' on head. The length of Jeogori became shorter from the line which covered hip to the line which covered waist. The width of Jeogori was suitable and sometimes it had a slit of side-seam line. The width of Git (neckand) was wide and the length of Git was long. 'Kal-git'appeared and it used other color fabric. The shape of sleeve was straight and narrow. They folded up their sleeves. They folded up their sleeves. They folded up their slack that look like 'Jam-bang-i'and the width of slacks was not suitable, and it was narrow. Baji (Korean traditional pants) were with or without knot, worn 'Hangjeon'(ankle band). They were barefoot and wore 'Hye'or 'Jipsin'(Korean traditional straw shoes). Thirdly a person of high birth or a low-ranked official put 'Yu-geon', 'Mang-geon', 'Gat', 'Tang-geon', 'Bok-du', 'Bok-geon', 'Whi-hang'on their head on a topknot. They wore 'Po (Shim-ui, Jick-ryeong'Jung-chi-mak, Do-po, etc)'on Baji and Jeogori. 'Po'was long and wide, it knot with 'Se-jo-dae'(string belt) or 'Po-baek-dae'(band belt). It had a slit of sideline and 'Mu'which had or had not or which were hard to confirm. The shape of sleeve was straight or very wide and its length was long. The width of Baji was wide and knotted with 'Hangjeon'and wore'Beoseon'and 'Hye'. Fourthly child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line and its width was wide. It had a 'Jeogori'which had s slit of sideline. The shape of sleeve was 'Tong-su'(straight), and the length of sleeve was diverse. They put 'Baeja'on 'Jeogori'. The width of Baji was not wide. They wore them straight without or with knot, 'Hangjeon'. They were barefoot or put on 'Jipsin'.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2013

The open bit line is vulnerable to noise compared to the folded bit line when read/write for the DRAM. According to the increasing DRAM densities, the core circuit operating conditions is exacerbated by the noise when it comes to the open bit line 6F2(F : Feature Size) structure. In this paper, the interference effects were analyzed by the data patterns between the bit line by experiments. It was beyond the scope of existing research. 68nm Tech. 1Gb DDR2, Advan Tester used in the experiments. The noise effects appears the degrade of internal operation margin of DRAM. This paper investigates sense amplifier power line splits by experiments. The noise can be improved by 0.2ns(1.3%)~1.9ns(12.7%), when the sense amplifier power lines split. It was simulated by 68nm Technology 1Gb DDR2 modeling.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.67-72
• /
• 2010

A new type of monopole antenna whit broadband characteristics is presented in this article. To reduce the size of the antenna, its upper part is folded. By separating the current flow, the resonance in the shorter part is in the higher band; and the longer part resonates in the lower band. This gives the broadband characteristics of the antenna. Slots on the corner using an oblique line improve the impedance matching and bandwidth. The measurement results show that the bandwidth operates from 0.848~0.992 GHz and 1.744~2.528 GHz, and the radiation patterns are in an omni-directional shape.

• International Journal of Contents
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.144-151
• /
• 2006

A rectangular loop antenna for S-band radar is proposed. The proposed loop antenna is the modified type of folded monopole antenna. The feeding line is coplanar stripline with $180^{\circ}$ phase difference for operating in odd mode. The proposed antenna showed return loss of -15.57dB at the center frequency and bandwidth of about 790MHz (> 25%) under the condition of VSWR < 2. The gains of single, 1x2, and 1x4 array loop antennas are 4.3, 7.0, and 10.2dBi, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.69-75
• /
• 2007

In this paper, a single plane wide band microstrip antenna for integrated circuit is designed and fabricated. A new configuration for a wide bandwidth is proposed. This antenna consists of two folded microstrip monopoles, which are fed by a coplanar waveguide (CPW). Therefore In this paper is folded terminal part of dual microstrip line for variable reactance value. As a result compared the proposed folded dual microstrip monopole antenna with established dual microstrip monopole antennas, the proposed antenna can widen bandwidth more then about over 1[GHz. The characteristics of the proposed antenna were analyzed by using an FDTD methods. The proposed antenna has $1.98{\sim}4.05GHz$ bandwidth for using ISM, Wibro and DMB band.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.19-24
• /
• 2024

In this paper, in order to realize lower cut-off frequency of the waveguide, the folded Ridge waveguide (FRWG) is suggested by alternating T-shape structure in the conventional folded waveguide with Y-shape structure. Suggested FRWG can be equivalent by the reverse Ridge waveguide. As the height of side of the FRWG is lower, the width of side is increased. Therefore, the cut-off frequency of the FRWG can be decreased more than half compared with conventional waveguide. The FRWG is designed with the length, height, and width of Y-shape structure of 40mm, 20mm, and 2mm, respectively. Designed FRWG has the cut-off frequency of the 1.996GHz. Also, the transition between the FRWG and SMA connector is designed. The transition is optimized by the capacitance of the signal line of the connector. Its result shows the VSWR under 2:1 in the band of 2.064 ~ 3.050 GHz. Suggested FRWG can be applied with miniaturization of various waveguide devices.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.363-368
• /
• 2008

This paper presents a miniaturization design technique of radio frequency identification (RFID) tag antenna operated in 910 MHz band. Miniaturization structure design for a tag antenna is performed by structure application of the folded dipole and meander line. In order to realize the maximum power transmission, imaginary part of a chip impedance and a tag antenna impedance is matched by complex conjugate number. The optimized tag antenna size is $50\;nm\;{\times}\;40\;nm\;{\times}\;1.6\;nm$ and its size is reduced about 62 % comparison with antenna size of reference [4]. The measured results of fabricated tag antenna are confirmed the reasonable agreement with prediction. The read range of the tag antenna with chip observed about 5 m.