• 제목/요약/키워드: fog nozzle

검색결과 18건 처리시간 0.025초

쿨링 포그 시스템의 저압 안개 노즐 분무특성에 대한 실험적 연구 (Experimental Study on the Spray Characteristics of Low Pressure Fog Nozzles in Cooling Fog System)

  • 김지엽;정철;강원중;김정웅;홍정구
    • 한국분무공학회지
    • /
    • 제27권4호
    • /
    • pp.173-180
    • /
    • 2022
  • Cooling fog is being used in various parts of society such as fine dust reduction, cleanliness, and temperature drop. Cooling fog has the advantage of low flow rate and ease of use compared to other spray systems. In the case of cooling fog, it was confirmed that the injection angle increased as the pressure increased and the nozzle diameter increased. In this study, the minimum injection angle was 33.61 degrees and the maximum injection angle was 107.38 degrees. It was confirmed that the larger the nozzle diameter and the smaller the pressure, the larger the droplet size. In addition, it was confirmed that the Sauter Mean Diameter (SMD) increased along the X and Y axis directions. It was confirmed that the size of the droplet decreases as it approaches the nozzle tip due to the characteristics of the nozzle design factor.

포그노즐을 이용한 온실냉방시스템 분석 (Fog Nozzle-Greenhouse Cooling System Analysis)

  • 김영중;유영선;윤진하;오권영;김승희
    • 생물환경조절학회지
    • /
    • 제6권1호
    • /
    • pp.48-54
    • /
    • 1997
  • 하절기 고온으로 인한 작물의 열악한 생육 환경개선을 위하여 미포그노즐을 이용하여 패트온실에서 증발 냉각 시험을 수행하였다. 본 연구에 사용된 미포그노즐의 분무특성을 말븐입자분석기로 분석한 결과 분무압 70kg/$\textrm{cm}^2$에서 분무입자의 크기는 평균 27$\mu\textrm{m}$로 나타났고, 이때의 분무량은 분당 100$m\ell$였다. 또한 평균 분무 입자의 크기가 27$\mu\textrm{m}$인 경우에 분무낙하량을 조사한 결과 낙하거리 150cm에서 총분무량의 88%가 공중에 부유하는 것으로 나타났다. 냉방시스템의 주요 구성 부분은 고압노즐, 양수펌프, 필터 및 미포그노즐 32개로 이루어졌고, 1분 분무-1분 환기로 이루어진 연속 분무 시험 결과 외기온 3$0^{\circ}C$의 조건에서 온실내 기온을 4$0^{\circ}C$에서 32$^{\circ}C$로 강하시킬 수 있었다 또한 분무시험시 측정한 온실내의 온습도 값을 psychrometric equation에 대입하여 온실내의 수분변화량을 분석할 수 있었으며, 이와 같은 분석을 통하여 온도강하정도와 온실내 공기의 절대습도비 변화량을 예측할 수 있는 실험식을 정립할 수 있었다. 이 실험식을 이용하여 우리 나라 표준형 온실 1-2W, 3-2G-3S에서 실내온도를 4$0^{\circ}C$에서 3$0^{\circ}C$로 강제 냉각시킬 때 필요한 분무수량을 분석한 결과 분무입자 27$\mu\textrm{m}$에서의 분무수량은 각각 80.7, 99.9$\ell$였으며, 포그시스템에 필요한 노즐의 수는 분당분무량 100$m\ell$의 경우 3분 분무기준으로 각각 270, 333개가 소요될 것으로 계산되었다. 앞으로 포그시스템을 활성화하기 위해서는 온실의 기상조건에 따른 증발율과 분무입자에 대한 심층적 연구가 요망된다.

  • PDF

증발냉각시스템의 활용실태 및 냉방효과 (Actual State of Practical Use and Cooling Effect of Evaporative Cooling Systems)

  • 김문기;유인호;김기성
    • 생물환경조절학회지
    • /
    • 제8권4호
    • /
    • pp.281-287
    • /
    • 1999
  • 현장조사 결과 패드-팬 시스템의 경우 6개 농가 모두 사용하고 있었으며, 온실 내기온은 외부기온보다 2~5$^{\circ}C$ 낮았다. 이시스템의 냉방효율은 평균 77.4% 이었으며, 외부의 상대습도가 60%이하 일 경우 냉방 효율이 높았다. 포그 시스템의 경우 현장조사에서 9농가 중 6농가가 사용을 못할 정도로 많은 문제점이 발견되었다. 포그입경, 분무수량, 운영 방법등 개선해야 할 사항이 많았다. 실험온실의 경우도 노즐의 설치 위치와 제어방법에서 문제점이 발견되었다. 포그입자가 커 증발하지 못하고 대부분이 바닥과 차광망으로 낙하하였고, 지역 기상조건을 고려하지 못한 제어방법으로 냉방효과를 떨어뜨리고 있었다. 냉방효과를 높이가 위하여 노즐의 위치 선정, 제어방법에 대한 연구가 수행되어야 하며, 지역적 기상특성을 고려한 연구와 내부 습도를 낮게 유지하는 연구도 수행되어야 할 것이다.

  • PDF

옥외 애자용 재료의 표면 전기전도 특성 (Electrical Conduction Properties of Surface in Materials for Outdoor Insulator)

  • 박영국;이운석;정수현;장동욱;임기조
    • 한국전기전자재료학회논문지
    • /
    • 제11권10호
    • /
    • pp.758-762
    • /
    • 1998
  • Electrical conduction property of insulator surface is most important factor to assess the insulation performances of outdoor insulating materials. In this paper, contamination performance of the materials to be used for outdoor insulator such as porcelain, EPDM, silicone rubber was discussed by measuring properties of average leakage current and scintillation discharge pulses under salt fog conditions. The fog was applied by nozzle in chamber and fogging fluids were deionized distilled water, 0.5wt% NaCI solution and 2wt% NaCl solution. The average leakage current showed linearly with applied voltage at dry and clean surface condition. The magnitude of leakage current was almost same at different kinds of samples. In case of deionized distilled water fog, the characteristics of leakage current and applied voltage were much different to those in case of dry and clean condition with 2wt% salt fog. In case of slat fog pollution condition, the leakage current was increased above critical voltage. the scintillation discharges were also activated at the level. The leakage current and scintillation discharges were increased with increasing pollution degree. The resistance to pollution properties of silicone rubber appeared excellent among them.

  • PDF

관창의 유동특성에 관한 연구 (A Study on the Flow Characteristics of the Spray Nozzle)

  • 이동명
    • 한국화재소방학회논문지
    • /
    • 제17권3호
    • /
    • pp.55-60
    • /
    • 2003
  • 본 연구에서는 관창의 유동특성예측을 위한 해석이론을 정립하고 수치해석으로부터 방수량과 방수형태를 예측하였다. 예측 데이터로부터 관창의 방수형태가 노즐과 니들의 위치에 따라 결정됨을 알 수 있었고, 관창의 유동특성은 노즐과 니들의 형상에 따라 그 특성이 결정됨을 알 수 있었다. 관창의 유동특성과 예측 데이터로부터 화재진압의 효율성을 극대화할 수 있는 새로운 관창의 모델이 제시되었다. 본 연구의 결과가 새로운 모델의 관창을 개발하는데 필요한 자료로 활용할 수 있을 것으로 보며, 또한 관창의 원천기술 확보, 동종업계의 기술력 파급효과 증대 및 소방분야의 기술개발 활성화 등에 이바지하고 자 한다.

상업용 토마토온실 냉방을 위한 저압분무식 포그시스템의 적용 (Application of Low Pressure Fogging System for Commercial Tomato Greenhouse Cooling)

  • 이현우;김영식
    • 생물환경조절학회지
    • /
    • 제20권1호
    • /
    • pp.1-7
    • /
    • 2011
  • 토마토 재배용 상엽용 온실의 여름철 냉방에 최근 국내에서 개발된 저압분무식 포그냉방시스템을 사용하기 위한 시스템 설치 및 관리기술을 규명하기 위하여 저압 포그시스템을 온실에 설치하여 실험을 통하여 그 적용 가능성을 분석하였으며 결과를 요약하면 다음과 같다. 포그를 분사한 온실이 분사하지 않은 온실보다 온도가 더 낮은 값을 보여 포그분사에 의한 냉방효과가 있음을 확인할 수 있었다. 그러나 전체적으로 상대습도가 비교적 낮게 나타나 냉각효과를 충분히 얻지 못한 것으로 판단되며, 포그노즐의 설치간격을 더 줄이거나 포그분사 시간을 더 늘리는 등의 조정을 통해서 충분한 냉방효과를 얻을 수 있을 것으로 판단되었다. 온실 전체의 시간에 따른 온도분포는 짧은 시간 동안에는 온도분포의 큰 변화는 없었으나 하루의 긴 시간 동안에는 온도분포의 변화가 다소 크게 나타났다. 이는 포그분사에 따른 온도편차의 발생은 크지 않으나 일사, 공기유동 등 다른 환경요인들에 의해 발생된 편차가 큰 것으로 판단된다. 특히 본 자료에는 나타내지 않았지만 온실 하부에서의 수평방향의 온도편차는 더 크게 나타나는 경향이 있었기 때문에 온도편차를 줄일 수 있는 포그시스템 관리방안에 대한 연구가 필요할 것으로 판단되었다. 앞으로 추가 실험을 통해 자연환기 토마토재배온실의 냉방을 위한 저압포그시스템 설치 및 관리기술을 제시하고자 한다.

자율형 소화모니터 노즐의 분사 성능에 대한 실험 연구 (Experimental Study on Spray Performance of Nozzles for Autonomous Fire Fighting Monitor)

  • 유성선;김형태;서정화
    • 대한조선학회논문집
    • /
    • 제59권2호
    • /
    • pp.80-88
    • /
    • 2022
  • A systematic experimental study is carried out for the fire fighting monitor nozzle of 65A diameter to design and manufacture a new nozzle with better water spray performance than available domestic nozzles. The nozzle inlet pressure, flow rate and reach for the discharged water from the nozzle are measured by utilizing the experimental facility consisting of two pumps and piping system with a flow meter and pressure gauges. It was found that the baffle position and baffle head chamfering were the most sensitive design factors to be remarkably changed in the flow rate of the discharged water. Also, It was confirmed that the baffle position and the water exit area had the significant effect on the change in reach distance. The results obtained from this study are expected to be used effectively to design new nozzles with excellent spray performances and also to validate numerical analysis results for evaluating the water spray performance of fire fighting monitor nozzles.

초음파적용 상온연무기의 분무특성에 관한 연구 (A Study on the Spray Characteristics of the Cold-Fog Spray with Ultrasonic Forcing)

  • 송민근;이경렬;손승우;나우정;주은선
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.299-302
    • /
    • 2002
  • Characteristics of the twin fluid spray with ultrasonic forcing are examined in order to obtain the high efficiency of cold fog spray of the automatic pest control machine which has been widely used for the equipment cultivation recently. An electrostrictive vibrator of PZT BLT and a magnetostrictive vibrator of ${\pi}type$ with 28 kHz are applied as the ultrasonic transducer. All experiments are made and observed in 4 methods of spray ; a conventional spray method without ultrasonic forcing, an indirect vibration method with ultrasonic forcing, an improving duality method by ultrasonic forced within liquid, and a combined use method with both of the indirect vibration method and the improving quality method. In results, It was clarified that the ultrasonic effects the atomization of spray droplets and its efficiency is about $10{\%}$ and especially much more in the case of the combined use method.

  • PDF

포그노즐을 이용한 온실냉시스템 분석 (Fog nozzle - Greenhouse Cooling System Analysis)

  • 김영중;유영선;윤진하;오권영;김승희
    • 한국생물환경조절학회:학술대회논문집
    • /
    • 한국생물환경조절학회 1997년도 봄 심포지움 및 학술논문발표요지
    • /
    • pp.104-111
    • /
    • 1997
  • 하절기 우리 나라의 온실내 온도는 4$0^{\circ}C$ 또는 그 이상으로 육박하고 있어서 작물 재배에 적합하지가 않다고 말한다. 채소류중에서 비교적 고온에서도 견딜 수 있는 가지과와 박과의 경우 생육 적기온은 20 ~ 28 $^{\circ}C$ 범위에 있으며 최고 한계 온도는 35$^{\circ}C$ 정도이므로 여름철 온실내의 환경은 대체로 작물 재배에 적합하지가 않다고 할 수 있다$^{2)}$ . 또한, 고온으로 인한 재배작물의 품질저하도 고온기 작물생산에 심각한 문제점으로 지적되고 있다. (중략)

  • PDF