• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.68-74
• /
• 2014

As the number of ECUs (Electronic control units) are increasing, reliability and functional stability of a software in an ECU is getting more important. Therefore the application of functional safety standards ISO 26262 is making the software more reliable. Software fault injection test (SFIT) is required as a verification technique for the application of ISO 26262. In case of applying SFIT, an artificial error is injected to inspect the vulnerability of the system which is not easily detected during normal operation. In this paper, the basic concept of SFIT will be examined and the application of SIFT based on ISO26262 will be described.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.509-514
• /
• 2002

This paper studies on the noise reduction for a small automobile DC Motor (a window motor) using the 6 sigma process. The application of 6 sigma process suggested reliable and valuable statistical data for the quality of the DC motor at the production line. In the measurement step in 6 sigma process, the FMEA(Failure Mode Effect Analysis) were used for the detection of noise sources. The application of 6 sigma process gave not only the improving method for the quality of the DC motor but also the confidence of improvement itself since it was done on the basis of the test results for a number of DC motors at the production line. Consequently the 6 sigma process was proved very effective for the noise reduction at the production line.

• Journal of Korean Society for Quality Management
• /
• v.33 no.1
• /
• pp.88-98
• /
• 2005

This paper considers a six sigma project for improving the TIP life time in a spot welding process. The project follows a disciplined process of five phases: define, measure, analyze, improve, and control. A process map is used to identify process input and output variables. Nine key process input variables are selected by using C&E matrix and FMEA, and finally four vital few input variables are selected from analyze phase. The optimum process conditions of the vital few input variables are jointly obtained by maximizing TIP life time using DOE and alternative selection method.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.487-494
• /
• 2013

Purpose: In this study, we propose the precision guided munitions verification methodology using the statistical analysis method has been proposed. and it can be applied to the precision guided munitions quality assurance work. Methods: This modeling is based on Failure Mode and Effects Analysis, Statistical Process Control, Defense Quality Managerment System, Production Readiness Review, Manufacturing Readiness Assesment and so on. Results: The Process Control Modeling that has the following procedures ; searching the critical to quality, statistical analysis by process, verify process. Moreover, the effectiveness of the methodology is verified by applying to the precision guided munitions. Conclusion: To achieve a analysis methods of statistical process control and verify process for precision guided munitions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.109-112
• /
• 2007

As buildings become higher, larger, and more complex, safety issues for construction workers working at such environments become more important. We analyzed 140 critical accident cases reported to the KOSHA(Korea Occupational Safety & Health Agency) for construction cranes and lifts by types of cranes and by patterns of accidents and causes. By finding out the accident's types and causes, we expect to develop an efficient measure for preventing similar accidents in the near future. The cases will be studied further and reexamined using the FMEA(Failure Mode and Effect Analysis) as a quantitative analysis method.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.1
• /
• pp.90-100
• /
• 2013

Deck-plates are widely used on construction sites, and have the advantage of enabling contractors to achieve a relatively uniform quality. But nevertheless, quality deviation in deck-plate construction can occur as the result of differences in site conditions and the experience of crew workers. In this study, the authors present a site quality evaluation prototype for building deck-plate construction. Through analyses of case studies and interviews with experts, standard quality check sheets and a quality management index were developed by estimating the importance of quality check items based on a Failure Mode and Effects Analysis (FMEA) method. The applicability and effectiveness of the prototype was evaluated through a case study and interviews with case participants. It was found that the prototype promoted an active quality management as a way of continuously improving quality management in deck-plate construction instead of passive quality inspection practice.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.163-169
• /
• 2015

In this paper, the evaluating test methods of the fire and the electric shock on the led lamp supply using the house is proposed. We analyzed FMEA in order to analyze the mechanism of the fire and the electric shock of the led lamp supply and designed durability tests on the environment ($85^{\circ}C$, 85% R.H.) and obtained through the two-step QFD and tested. We verified the evaluating test methods of the fire and the electric shock on the led lamp supply using the house through the analysis of the test results.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.149-153
• /
• 2015

One common roadblock to innovation is the inability to define the problem that needs to be solved. Main contributors to this situation are the complexity of real field and the psychological inertia. 9-Windows can help break the complexity and the psychological inertia. In this article, we attempt to propose how to link resources to space and time framework through 9-Windows. Also, we propose how to use the 9-Windows to find multiple perspectives and explore solutions to a problem. This research is expected to be a vehicle to make an effective use of 9-Windows along with TRIZ, SIT, CT, FMEA and QFD.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2006

Basis frame-work's base in a semiconductor industry have gas, chemical, electricity and various facilities in bring to it. That it is a foundation by fire, power failure, blast, spill of toxicant huge by large size accident human and physical loss and damage because it can bring this efficient, connect with each kind mechanical, physical thing to prevent usefully need that control finding achievement factor of human factor of human action. Large size accident in a semiconductor industry to machine and human and it is involved that present, in system by safety interlock defect of machine is conclusion for error of behaviour. What is not construing in this study, do safety in a semiconductor industry to do improvement. Control human error analyzes in human control with and considers mechanical element and several elements. Also, apply achievement factor using O'conner Model by control method of human error. In analyze by failure mode effect using actuality example.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.55-68
• /
• 2007

Recently, all kind of 21C-typed electronic goods show the tendency of hightechnology and digital convergence rapidly. Also, failure mechanism which differs from original goods concept presents. Today, failure mechanism which differs from one that was happened by restricted harmful environment material before adapted the raw of environment material is changing the paradigm of reliability engineering. Thus, when applied the environment matter of original and secondary material at the electronic goods were removed, reliability assessment method and prediction stay into low level. This study suggests as solution to overcome these phenomenon. The study on the management method of environmental restriction substances which is recognized as important element in the reliability assessment about environment material of electronic goods and the study on reliability assessment method of PWB without environment material are progressed.