Journal of the Korea Safety Management & Science (대한안전경영과학회지)

Korea Safety Management & Science (대한안전경영과학회)
권호 표지

Reliability Assessment Methods for Electronic Component Removed Environmental Materials

환경물질을 제외한 전자부품의 신뢰성 평가 방법 연구

  • 이종범 (한국표준협회 신뢰성기술경영센터) ;
  • 조재립 (경희대학교 테크노공학대학)
  • Published : 2007.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, all kind of 21C-typed electronic goods show the tendency of hightechnology and digital convergence rapidly. Also, failure mechanism which differs from original goods concept presents. Today, failure mechanism which differs from one that was happened by restricted harmful environment material before adapted the raw of environment material is changing the paradigm of reliability engineering. Thus, when applied the environment matter of original and secondary material at the electronic goods were removed, reliability assessment method and prediction stay into low level. This study suggests as solution to overcome these phenomenon. The study on the management method of environmental restriction substances which is recognized as important element in the reliability assessment about environment material of electronic goods and the study on reliability assessment method of PWB without environment material are progressed.

Keywords

References

  1. 박성현. 박영현 (1997), '통계적 품질관리', 민영사, pp. 514-526
  2. 박성현 (2003), '현대실험계획법', pp. 521-564
  3. 이근철 (1992), FTA안전공학, 기전연구사
  4. 이종범 (1995), '전자기기용 Plastic Film Capacitor에 대한 가속시험기법 연구', 한국신뢰성연구회(한국표준협회,공업진흥청), 신뢰성. 보전성 심포지엄
  5. 이종범. 조재립 (2003), '환경물질에 대한 사용 신뢰성평가 방법에 관한 연구', 대한 품질경영학회지, Vol. 31, No. 4 pp.226-238
  6. 이종범. 조재립 (2000), '자동차 전장부품의 초 가속신뢰성 수명시험방법에 관한 연구', 대한품질경영학회지, Vol. 28, No. 4 pp.16 -28
  7. 이치우. 김선진. 이성우. 정상영 (1993), '신뢰성공학', 원창출판사, pp. 21-79
  8. 윤호규. 김환건(2001), 고분자 전자 재료, 문운당
  9. 윤창인 (2000), 'OECD의 권고이행평가 및 향후과제", 내외경제연구원
  10. 조재립 (1995), '선형비용모델을 이용한 계수선별형 검사방식의 최적설계', 대한품질 경영학회지, 제23권, 제4호, pp. 74-89
  11. 조재립 (2001), 품질경영, 청문각
  12. 표면실장기술 (1996), Vol.6 No.1
  13. 환경부(2003), 환경 백서
  14. BRYAN DODSON & DENNIS NOLAN(1998), "The Complete Guide to the CRE", Quality Publishing, pp. 291-369
  15. BRYAN DODSON & DENNIS NOLAN(1999),"Reliability Engineering Handbook', Quality Publishing, pp. 320-403
  16. D.H, Stamatis(1995), "Failure Mode and Effect Analysis" ASQC Quality Press, pp. 25-247
  17. E.E. LEWIS(1994), "Introduction to Reliability Engineering", WILEY, pp. 142-244
  18. Elsayed A. Elsayed(1996), "Reliability Engineering", ADDISON_WESLEY pp. 378-409
  19. GERALD SMITH(1995). "Statistial Process Control and Quality Improvement" Prentice Hall, pp. 137-148
  20. Ning-Cheng Lee. (1999). "lead-free soldering -where the world is going" IEEE
  21. Official Journal of the European Union (2003. 2. 13). "Restriction on the use of Certain Hazardous Substances." RoHS, EU
  22. Wayne Nelson (1990). "Accelerated Testing" Statistical Models, Test plans, am Data Analyses. John Wiley & Sons, pp. 71-94, 99-106
  23. 越川清重(1990), "電子部品の信頼性 試験", 日科技連, pp. 156-169