• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.363-370
• /
• 2011

본 연구에서는 화력발전소에서 발생하는 폐기물인 리젝트 애시를 자원화하기 위하여 시멘트 혼합재로 사용하는 방안을 검토하고자 하였다. 이를 위하여 포졸란 활성도 비교를 통하여 효율적인 리젝트애시의 분말도를 선정하였으며, 현재 널리 사용되고 있는 콘크리트용 혼합재인 플라이애시와 비교하였다. 고분말 리젝트애시와 플라이애시를 슬래그시멘트와 혼합하여 시멘트복합체를 제조하였으며, 제조한 시멘트복합체 및 고분말 리젝트애시의 성능 평가를 위하여 페이스트(응결, 유동성, 기기분석), 모르타르(압축강도) 실험을 실시하였다. 기기분석 결과 고분말 리젝트애시의 수화반응기구는 플라이애시와 유사하지만 미세조직이 치밀해지는 특성을 나타내었다. 물성 측정결과에서는 고분말 리젝트애시가 플라이애시와 비교하여 응결지연이 감소하고, 초기강도 및 장기강도에서 우수한 성능을 나타내었다. 따라서 리젝트애시의 분말도를 $6,000cm^2$/g 수준으로 상향시킨다면 시멘트 복합체에 활용하는 것이 가능하며, 시멘트 물성 향상에도 기여할 수 있을 것으로 예상된다.

• 자원리싸이클링
• /
• 제5권3호
• /
• pp.44-49
• /
• 1996

국내 석탄발전소에서 배출되고 있는 비산회의 재활용에 가장 큰 문제점은 비산화에 혼입되어 있는 미연탄소분이다. 본 연구는 기존 포말부유선광법으로 유연탄비산회의 미연탄소분을 제거할 때 기포제종류 및 첨가량의 영향, 포집제 첨가량의 영향을 실험하고, 여기에서 수율, 회수율, 미연분제거율, 공정효율을 구하였다. 또한 비산회정제 전후의 화학적 성분을 분석하여 성분변화를 확인하였다. 실험결과는 유연탄 비산회 중의 미연탄소분을 92.4%까지 제거할 수 있었으며, 그 결과 비산회의 순도를 99.4%까지 높일 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.31-32
• /
• 2011

Granulated slag from metal industries and fly ash from the combustion of coal are industrial by-products that have been widely used as mineral admixtures in normal and high strength concrete. Due to the reaction between calcium hydroxide and fly ash or slag, the hydration of concrete containing fly ash or slag is much more complex compared with that of Portland cement. In this paper, the production of calcium hydroxide in cement hydration and its consumption in the reaction of mineral admixtures is considered in order to develop a numerical model that simulates the hydration of concrete containing fly ash or slag. The heat evolution rates of fly ash- or slag-blended concrete is determined by the contribution of both cement hydration and the reaction of the mineral admixtures. Furthermore, the temperature distribution and temperature history in hardening blended concrete are evaluated based on the degree of hydration of the cement and the mineral admixtures. The proposed model is verified through experimental data on concrete with different water-to-cement ratios and mineral admixture substitution ratios.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.130-138
• /
• 2004

The primary factors that affecting concrete sulfate resistance are the chemistry of the Portland cement and the chemistryandreplacementlevelofmineraladmixtures. In order to investigate the effect of those on the sulfate attack the testing program involved the testing of several different mortar mixes using the standardized test, ASTM C 1012. four different cements were evaluated including one Type I cement, two Type I-II cements, and one Type V cement. Mortar mixes were also made with mineral admixtures as each cement was combined with three different types of mineral admixtures. One Class F fly ash and one Class C fly ash was added in various percent volumetric replacement levels. The expansion measurements of mortar bars were taken and compared with expansion criteria recommended from past experience to investigate the effect of each factor.

• 시멘트 심포지엄
• /
• 31호
• /
• pp.92-99
• /
• 2004

• Computers and Concrete
• /
• 제10권4호
• /
• pp.349-360
• /
• 2012

In this paper, compressive strength, water permeability and abrasion resistance of concretes containing high volume fine fly ash (FFA) and fine ground palm oil fuel ash (GPA) were studied. Portland cement type I was replaced with FFA and GPA at dosages up to 70% by weight of binder. Ground river sand (GRS) was also used to replace Portland cement in order to indicate the level of filler effect. Results indicated that FFA was slightly more reactive than GPA. The replacement of 40-70% of FFA produced concretes with compressive strength, permeability and abrasion resistance comparable to those of normal concretes. The incorporation of GPA slightly reduced the performances of concretes as compared to those of FFA concretes. The reduction of Portland cement was partly compensated by the increase in pozzolanic activity of the fine fly ash and palm oil fuel ash and thus enabled the large replacement levels.

• 한국결정성장학회지
• /
• 제33권6호
• /
• pp.210-215
• /
• 2023

조합 원료의 소성성은 시멘트 제조 기술에서 매우 중요한 요소이며, 각 원료들의 물리적, 화학적 및 광물학적 특성에 의해 좌우된다. 본 연구에서는 국내산 석탄재와 일본산 석탄재를 시멘트 원료로 사용했을 경우, Lafarge 평가 방법과 Polysius 평가 방법을 이용하여 소성성을 비교하였다. 석탄재의 종류와 투입량에 관계없이 석탄재를 사용하였을 경우가 석탄재를 사용하지 않았을 때 보다 소성성이 향상됨을 알 수 있었다. 모든 종류의 석탄재에서 투입량이 증가할수록 소성성이 향상되었으나, 3 %까지 소성성의 향상이 뚜렷하였고 4 % 첨가 시에는 향상 폭이 상대적으로 크지 않았다. 결론적으로 시멘트의 품질이 허용하는 범위 내에서 석탄재의 투입량이 증가할수록 소성성이 향상되며, 따라서 클링커의 소성에 필요한 연료비의 절감도 기대할 수 있다.

• Nuclear Engineering and Technology
• /
• 제44권3호
• /
• pp.331-342
• /
• 2012

Since the opening of the Shin-Kori #1,2 in 2005, fly ash mixed concrete has been used for NPP concrete structures under construction in Korea with the aim of preventing aging and improving durability. In this paper, the quality suitability of fly ash manufactured in Korea is assessed and the basic physical properties of fly ash mixed concrete and its durability against primary causes of aging are verified through experimental methods. Because of the internal structure filling effect from the pozzolanic reaction of fly ash and the resulting improvements in mechanical performance in such areas as strength and salt damage resistance, the durability of fly ash mixed concrete is shown to be superior. It is judged that this result can be applied in measures not only for improving the safety of NPP structures in operation in Korea but also for implementing effective structure life management should extending the life of structures be needed in the future.

• 한국농공학회지
• /
• 제42권3호
• /
• pp.107-113
• /
• 2000

This study is performed to examine the physical and mechanical properties of concrete with fly ash. Test results show that the unit weights of concrete with fly ash are decreased 1-3% and the highest strength is achieved by 10% filled fly ash concrete with it is increased 7% than that of the normal cement concrete. the ultrasonic pulse velocity is in the range of 3.705~4.204m/s and the dynamic and static modulus of elasticity is in the range of 271$\times$103 ~289$\times$103kgf/cm2 and 208$\times$103 ~262$\times$103kgf/cm2 respectively. The acid-resistance is increased with increase of the content of fly ash. It is 1.2 times of the normal cement concrete by 10% filled fly ash concrete and 1.7 times by 30% filled fly ash concrete respectively.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.105-114
• /
• 2010

The objective of the paper is to experimentally investigate the compressive strength of the concrete incorporating fly ash. Ordinary Portland cement(OPC). Water to binder ratio(W/B) ranging from 30% to 60% and curing temperature ranging from $-10^{\circ}{\sim}65^{\circ}C$ were also adopted for experimental parameters. Fly ash was replaced by 30% of cement contents. According to the results, strength development of concrete contained with fly ash is lower than that of plain concrete in low temperature at early age and maturity. In high curing temperature, the concrete with fly ash has higher strength development than that of low temperature regardless of the elapse of age and maturity. Fly ash can have much effect on the strength development of concrete at the condition of mass concrete, hot weather concreting and the concrete products for the steam curing.