• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.310-310
• /
• 2009

In the two structure of ITO/N,N'-diphenyl-N,N' bis (3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/R-H : R-D/Al device, ITO/Amorphous Fluoropolymers/TPD/R-H : R-D/LiF/Al device. we studied the effect of organic materials defending on the electrical characteristics of red OLEDs. The thickness of TPD and R-H : R-D was manufactured 40 nm, 60 nm, respectively under a base pressure of $5\times10^{-6}$Torr using a thermal evaporation. The AF used for an hole-injection is the thickness of 0.5 [nm] and the LiF used for an electron-injection is the thickness of 0.5 [nm]. Compared to the two from the devices made with the hole injection and without hole injection We found that the luminous efficiency and the external quantum efficiency are improved a fact of one- hundred, two, respectively.

• 대한가정학회지
• /
• 제35권3호
• /
• pp.275-286
• /
• 1997

The effects of water-and oil-repellent finishes on the surface characteristics of polyester fabrics were investigated in this study. Three kinds of fluoropolyment were selected as water=and oil-repellent finishing agents. The effects of water-and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respects to crease resistance, contact angle and wicking time. The results of this study were as follows: 1. The polyester fabrics treated with fluoropolymers showed much higher water repellency and oil repellency than those of untreated polyester fabrics. Water-and oil-repellency of fabrics were increased with the crystallinity and the hydrophobic-hydrophillic components of fluoropolymers. 2. Water repellency of fabrics treated with fluoropolymer with hydrophobic components was the highest. Oil repellency of fabrics treated with fluoropolymer with high crystallinity was the highest. Water-and oil-repellency of fabrics treated with fluoropolymer with hydrophyllic components was low comparatively. 3. The crease resistance of polyester fabrics treated with fluoropolymer nearly approached to that of untreated polyester fabric. 4. The water-and oil-repellent finishes improved contact angle markedly. Especially the contact angle of ployester fabric treated with fluropolymer with hydrophobic component was the biggest. 5. The wicking time of polyester fabric treated with fluropolymer with hydrophobic component was the longest.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.140-143
• /
• 2004

Compatibility of polymeric materials governs their suitability for nearly all potential applications. An aspect of compatibility that is frequently important for fluoropolymers is their ability to isolate fluids by serving as a barrier to mass transport. This property is commonly expressed as permeability. In ideal cases, both solubility and diffusivity are constant at any given temperature and so the permeability is also a constant.(omitted)

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• 폴리머
• /
• 제28권1호
• /
• pp.24-34
• /
• 2004

여러 종류의 불소고분자내로 다양한 유기용매들의 동적 흡수 평형 (혹은 팽윤) 실험을 진행하였다. 불소로 포화된 고분자는 이상적 흡수 거동을 나타내었으나 부분적으로 치환된 불소고분자는 최종 흡수단계에서 가속화되는 비이상적 흡수 거동을 나타내었다. 회귀분석에 의해 픽-확산 거동으로부터 벗어나는 정도를 최소자승법 (즉, ∑ ［측정값-예측값］$^2$)으로 구한 결과 -퍼플루오로알콕시 공중합체, 폴리(에틸렌 테트라플루오로에틸렌) 공중합체, 폴리(비닐리덴 플루오라이드), 폴리(에틸렌 클로로트리플루오로에틸렌) 공중합체에 대해 각각 3.0${\times}$$10^{-4}$, 1.75${\times}$$10^{-3}$, 8.68${\times}$$10^{-3}$, 1.75${\times}$$10^{-2}$의 수치를 나타내었다. 응력-변형 실험 결과 비-픽 확산 거동은 팽윤된 불소고분자의 기계적 성질 (탄성률과 인장 강도) 변화와 상관관계가 있음을 알 수 있었다. 비이상적 흡수 거동의 주요 원인은 치환된 수소 혹은 염소와 불소원자 간의 전기음성도 차이에 기인한 사슬 간극성 결합 구조가 침투성분의 가소화 효과에 의해 비선형적 이완이 진행되면서 비-픽 확산이 진행되기 때문이다. 따라서 부분적으로 치환된 불소고분자를 차단성 혹은 선택적 투과기능이 요구되는 분야에 적용할 때 가소화 성분에 대한 용해 및 확산 거동에 대한 신중한 고찰이 필요하다.

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• 멤브레인
• /
• 제17권2호
• /
• pp.81-92
• /
• 2007

막 분리공정은 기존의 분리공정이 달성하기 쉽지 않은 많은 공정들을 대체할 수 있기 때문에 관련 학계나 산업체에서 많은 관심을 받고 있다. 특히, 고분자막을 이용한 기체분리공정은 해마다 가파른 성장세를 보이는데 이는 주로 기존의 기체분리공정에 비해 설치가 용이하고 분리공정에 필요한 에너지를 절약할 수 있기 때문이다. 고분자막을 이용한 기체분리의 가장 중요한 요소는 물론 뛰어난 선택적 투과성을 가지는 소재의 개발에 있다. 현재 상업적으로 쓰이고 있는 대부분의 기체분리용 고분자막을 폴리술폰, 폴리카보네이트 및 폴리이미드와 같은 탄화수소계열의 고분자소재이며, 이들은 수소분리, 산소부화, 천연가스에서 이산화탄소분리 등 다양한 용도로 사용되고 있다. 이와는 상대적으로 불소고분자막들에 대한 기체분리특성은 탄화수소계열의 고분자막에 비교하여 그다지 많이 알려지지는 않았다. 따라서 본 논문에서는 무정형 불소고분자로부터 제조된 고분자막에 대한 기체 및 증기분리특성에 대해 자세하게 살펴보고자 한다. 이러한 불소고분자들은 종종 기존의 탄화수소계열의 고분자막과는 상이한 기체 투과 및 분리특성을 보이며, 따라서 본 논문에서는 이러한 기체분리거동을 활용한 적용방안에 대해서도 알아보고자 한다.

• 멤브레인
• /
• 제10권3호
• /
• pp.139-147
• /
• 2000

불소고분자(ETFE, ECTFE, PVDF)내로 방향족 유기용매(벤젠, 톨루엔, 클로로벤젠)의 비정상 흡수실험에서 non-Fickian (혹은 비이상적인) 확산이 관측되었다. 본 연구에서는 Fick's 법칙에 바탕을 둔 확산모델식(Crank, Long ＆ Richman, Berens ＆ Hopfenberg, Neogi, Li)을 이용하여 방향족 유기용매의 흡수실험에서 관측된 비이상적 흡수데이터론 분석하였다. 모델식의 매개변수 값은 실험데이터와 모델 예측 값의 차이를 최소화하는 least square 법을 이용하여 결정하였다. Fickian 확산으로부터 약간 벗어나는 ETFE 흡수데이터는 앞에서 언급한 모델식들을 이용하여 모두 만족할 만한 결과를 얻었다. 특히 Neogi 모델식은 ETFE-용매계의 고유확산계수(0.4~0.8$\times$$10^-5{cm}^2$/day) 및 평형 확산계수(0.13~0.31$\times$$10^-4{cm}^2$/day), 고분자구조의 이완 속도상수 값을 예측해주었다. PVDF의 전형적인 sigmoidal 흡수데이터에 대해서는 Crank 모델이 비교적 잘 적용되었으며, 초기 확산계수와 평형 확산계수간의 비($D_{\infty}/D_i$)는 80~200의 값을 나타내주었다. 가속적인 흡수데이터를 나타내주는 ECTFE의 경우에는 모든 모델식들의 예측 결과가 상당히 벗어났다. Fickian 확산으로부터 많이 벗어나는 비이상적인 흡수데이터로부터 확산 이동성질과 고분자구조의 이완현상에 대한 정보를 얻기 위해서는 열역학이나 continuum mechanics에 바탕을 둔 새로운 모델식을 적용해야 할 것으로 사료된다.

• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.231-237
• /
• 2014

최근 자원과 에너지를 절약하고 효과적으로 사용하여 환경 훼손을 줄이고 청정에너지를 이용할 수 있는 기술의 연구가 활발하게 진행되고 있다. 이와 관련 하여, 친환경적이고 경제적이며 독성이 거의 없는 초임계 유체가 물질의 합성과 프로세스에 많이 응용되고 있다. 이산화탄소는 낮은 임계온도와 압력, 가격 경쟁력 그리고 무독성 등의 장점을 가짐으로써 초임계 공정에 많이 사용되고 있는 용매중에 하나이다. 그러나 분자량이 높은 고분자들에게는 낮은 용해력이 단점으로 있어서 사용에 제한적이다. 따라서, 분자량이 높은 고분자를 용해하기 위해선 하이드로카본 계열의 용매를 사용하여야 한다. 본 연구에서는, 초임계 유체를 이용하여 Poly (methyl methacrylate)/클레이 나노 복합체 제조에 관한 연구를 진행 하였다. 또한, 초임계 유체 내에서 분산성을 극대화 할 수 있도록 $Na^+$-MMT 클레이 표면을 플로린 계열의 surfactant로 개질 시키어 복합체 제조에 응용 하였다. 개질된 클레이를 이용하여 제조 된 복합체는 neat Poly (methyl methacrylate)보다 향상된 기계적, 열적 특성을 보였으며, 제조 된 복합체는 X-ray 회절 방법, 열적 안정성 그리고 TEM 으로 나노 클레이의 분산성을 분석 하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 1998

Present silicon dioxide (SiOz) 떠m as intennetal dielectridIMD) layers will result in high parasitic c capacitance and crosstalk interference in 비gh density devices. Low dielectric materials such as f f1uorina뼈 silicon oxide(SiOF) and f1uoropolymer IMD layers have been tried to s이ve this problem. I In the SiOF ftlm, as fluorine concentration increases the dielectric constant of t뼈 film decreases but i it becomes unstable and wa않r absorptivity increases. The dielectric constant above 3.0 is obtain어 i in these ftlms. Fluoropolymers such as polyte$\sigma$따luoroethylene(PTFE) are known as low dielectric c constant (>2.0) materials. However, their $\alpha$)Or thermal stability and low adhesive fa$\pi$e have h hindered 야1리ru뚱 as IMD ma따"ials. 1 The concept of a plasma processing a찌Jaratus with 비gh density plasma at low pressure has r received much attention for deposition because films made in these plasma reactors have many a advantages such as go여 film quality and gap filling profile. High ion flux with low ion energy in m the high density plasma make the low contamination and go어 $\sigma$'Oss피lked ftlm. Especially the h helicon plasma reactor have attractive features for ftlm deposition 야~au똥 of i앙 high density plasma p production compared with other conventional type plasma soun:es. I In this pa야Jr, we present the results on the low dielectric constant fluorocarbonated-SiOF film d밑JOsited on p-Si(loo) 5 inch silicon substrates with 00% of 0dFTES gas mixture and 20% of Ar g gas in a helicon plasma reactor. High density 띠asma is generated in the conventional helicon p plasma soun:e with Nagoya type ill antenna, 5-15 MHz and 1 kW RF power, 700 Gauss of m magnetic field, and 1.5 mTorr of pressure. The electron density and temperature of the 0dFTES d discharge are measUI벼 by Langmuir probe. The relative density of radicals are measured by optic허 e emission spe따'Oscopy(OES). Chemical bonding structure 3I피 atomic concentration 따'C characterized u using fourier transform infrared(FTIR) s야3띠"Oscopy and X -ray photonelectron spl:’따'Oscopy (XPS). D Dielectric constant is measured using a metal insulator semiconductor (MIS;AVO.4 $\mu$ m thick f fIlmlp-SD s$\sigma$ucture. A chemical stoichiome$\sigma$y of 야Ie fluorocarbina$textsc{k}$영-SiOF film 따~si야영 at room temperature, which t the flow rate of Oz and FTES gas is Isccm and 6sccm, res야~tvely, is form려 야Ie SiouFo.36Co.14. A d dielec$\sigma$ic constant of this fIlm is 2.8, but the s$\alpha$'!Cimen at annealed 5OOt: is obtain려 3.24, and the s stepcoverage in the 0.4 $\mu$ m and 0.5 $\mu$ m pattern 킹'C above 92% and 91% without void, res야~tively. res야~tively.