• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.4
• /
• pp.412-418
• /
• 2017

During orthodontic treatment, formation of white spot lesions (WSLs) around brackets has long been recognized as a potential risk. This study performed to investigate effect of preventing enamel demineralization and remineralization by application of fluoride-containing orthodontic primer. Fifty extracted bovine incisors teeth were randomly allocated to 3 groups: (I) Non-preparation specimens, (II) Application of Light Bond$^{TM}$ as fluoride containing orthodontic primer, (III) Application of Transbond$^{TM}$ XT Primer as traditional orthodontic primer without fluoride. Each group is demineralized under artificial carious solution. The demineralization pattern was evaluated using a Q-ray view, Vickers hardness test and polarized light microscope. The remained primer was calculated as 35 - 50%. The highest surface microhardness was shown on Light Bond$^{TM}$ surface. There were statistically significant differences in Vickers microhardness number between adjacent areas of Light Bond$^{TM}$ and non-prepared area. There was almost no demineralization of the enamel surface under the Light Bond$^{TM}$. At the adjacent site of Light Bond$^{TM}$, the shallow caries pattern and remineralization appearance were also observed. These results suggest that the use of fluoride-containing primers may be useful for bracket attachment to reduce enamel demineralization during orthodontic treatment.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.23-38
• /
• 1988

In order to investigate the material formed by application of fluoride on human dentin, exposed dentin of tooth cervix and sound dentin powder was treated by several fluoride solutions. The former was observed by scanning electron microscope and the latter was analysed by x-ray diffractometer and infrared spectrophotometer. The results obtained were as follows: 1. Application with NaF, $SnF_2$ and $Na_2PO_3F$ on exposed dentin of tooth cervix formed mineralized materials covered. 2. The amount of mineralized materials increased with time intervals of applying the fluorides. 3. The density of mineralized materials was highest in $Na_2PO_3F$ treatment group, and NaF treatment group was higher than $SnF_2$ treatment group. 4. $SnF_2$ remained in covering of mineralized materials. 5. Application with NaF and $Na_2PO_3F$ formed mineralized materials characterized apatitic crystals. 6. The crystallinity of mineralized materials was higher prominently in $Na_2PO_3F$ treatment group.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.156-163
• /
• 2022

Background: This study attempted to apply resin infiltrant (RI) as a method to maintain the effect of tooth bleaching treatment and compared it with fluoride varnish (FV) or artificial saliva to evaluate the effect. Methods: Sixty healthy lozenge specimens were classified into five groups. Group 1 was the negative control group, and discoloration was induced after artificial saliva treatment of the tooth specimen (G1_S+C). Group 2 was a positive control group, in which pigmentation was induced after bleaching treatment and artificial saliva treatment (G2 _B+S+C). Coloration was induced in group 3 (experimental group 1) after bleaching treatment and artificial saliva treatment, followed by application of fluorine varnish (G3_B+FV+S+C). Coloration was induced in Group 4 (experimental group 2) after applying RI after bleaching treatment and artificial saliva treatment (G4_B+RI+S+C). Pigmentation was induced in group 5 (experimental group 3) after bleaching treatment and artificial saliva treatment, followed by acid treatment (etching) and treatment with RI (G5_B+E+RI+S+C). Coffee and wine were used to induce discoloration. The lightness value (L^*) of the CIE L^*a^*b^* color system was obtained by image analysis. Kruskal-Wallis H analysis was performed for the mean difference in L^* values by group. Results: When coloration was induced with coffee, there was no significant difference in L^* value between artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups. There was no significant difference in L^* values between the artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups, even in the case of wine induced coloration. Conclusion: It was confirmed that artificial saliva or RI treatment had similar effects to the FV previously used to maintain the effect of tooth bleaching treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2027-2036
• /
• 2013

Comparison of removal performance between reverse osmosis(RO), nanofiltration(NF), electrocoagulation(EC) and electroadsorption(EA) for removal of nitrate and fluoride often exceeded the limits of water quality in small water treatment plants. Removals of nitrate and fluoride were 72-92% and 74-85% in RO, 5-15% and 1% in NF, 99% and 44% in EA equipped with MWCNT coated electrodes, 82% and 77% in EA equipped with Cu-MWCNT electrodes, and 11-46% and 69-99% in EC. Consequently, high removals of both ions were anticipated in RO. Effective removal of both ions are possible for EC, but great production of sludge is a big burden. EA equipped with the MWCNT electrodes showed a great fluctuation in removal efficiency, and electrode stability should be upgraded.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.341-356
• /
• 1993

In the prevention of root surface caries, antimicrobial therapy for the control of subgingival and supragingival plaque is seriously considered as a long term suppression of pathogenic microflora. Recently, varnishes containing antimicrobial agents have been developed to control the supragingival microflora. The purpose of this study was to determine the antimicrobial effects of 20% chlorhexidine varnish and 2.6% silane fluoride varnish with sealant. In clinical experiments, 12 subjects were selected from the periodontally treated patient and divided into 3 groups. After a dental prophylaxis, the subjects were treated with single application of placebo varnish (group I), 20% chlorhexidine varnish (group II), and 2.6% silane fluoride varnish (group III). Root surface plaque samples were taken before (baseline) and one, two, four, and 8 weeks after the treatments. Microbiological examinations of root surface plaque were performed with culture study and indirect immunoflorescence (I.I.F.) study, and immunological examination of gingival crevicular fluid antibody titers was performed with ELISA study. The results were as follows: 1. Pathogenic microflora on the root surface including S. mutans, S. sanguis, S. mitis, A. naeslundii, A. viscosus were 24 - 37% on I.I.F. study. 2. S. mutans, S. sanguis, S. mitis, A. naeslundii, A. viscosus of the root surface plaque was significantly reduced from 1 week to 8 weeks after antimicrobial varnish treatment, but showed generally increasing tendency in control group. 3. Gingival crevicular fluid antibody titers were significantly reduced from 1 or 2 weeks to 4 weeks after antimicrobial varnish treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.201-206
• /
• 2006

A recent laboratory study has demonstrated improved caries lesion resistance with enamel that was exposed to $CO_2$ laser irradiation for very short time period. When topical fluoride treatment was performed before or after laser irradiation, reductions in dental caries. The purpose of this scanning electron microscopic(SEM) study and atomic force microscope study was to characterize surface alterations in tooth enamel after in vitro laser irradiation alone and combined topical fluoride treatment either before or after laser irradiation. The treatment effects of laser irradiation led to the formation of an irregular, mild porosities and fine fissures, also created granular materials. But when laser irradiation was followed by APF, the enamel surface had homogenous architecture. The result led to the caries resistance effects by these granular structures have been considered to represent redeposited mineral phases due to the mobilization of calcium, phosphate, and fluoride from lased enamel.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.321-328
• /
• 2024

The performance of carbon fluoride-based lithium primary batteries (Li/CF_X) is limited due to poor rate capability resulting from the low conductivity of carbon fluoride, which is used as the active material. Therefore, in this study, we applied a carbon coating using pyrolysis fuel oil on carbon fluoride to overcome this limitation and considered its electrochemical performance. An amorphous carbon layer was formed on the surface of the carbon fluoride through carbon coating, and the surface physicochemical properties of the carbon fluoride were meticulously considered based on the heat treatment temperature. The advanced research chemical 1000 heat treated at 450 ℃ (ARC@C450) sample, which was commercial carbon fluoride heat-treated at 450 ℃, showed the largest increase in the concentration of sp² carbon bonds (62%) and the highest formation of semi-ionic C-F bonds. Also, the primary battery using the ARC@C450 sample as a cathode active material exhibited stable discharge capability at the highest rate of 5 C (392 mAh/g), and the R_ct value was reduced by 53% compared to the untreated sample. Therefore, we proposed pyrolysis fuel oil-based carbon coating as a method to overcome the low conductivity of carbon fluoride, and the carbon-coated carbon fluoride showed excellent rate performance, suggesting its potential application in high-power primary batteries.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.257-262
• /
• 2013

The fluorine-containing waste water tends to show a higher removal efficiency through the coagulative precipitation process with calcium. However the tetrafluoroborate produced from the etching process is difficult to remaval due to it's low reactivity with calcium. The objective of this study is improving the efficiency of fluoride ion removal in tetrafluoroborate through decomposing. Research on tetrafluoroborate decomposition depending on reaction pH, temperature, and aluminum dosage were conducted, using a laboratory-scale reactor. The result shows that the reaction of tetrafluoroborate with aluminum is faster with lower pH, higher water temperature, and higher Al/T-F (Aluminum/Total Fluoride) mole ratio. It is found that there was no big change in concentration after over 120 minutes of reaction. This study is to be able to improve the efficiency of tetrafluoroborate and fluoride wastewater treatment by using aluminum.

• Journal of dental hygiene science
• /
• v.11 no.5
• /
• pp.445-453
• /
• 2011

Objectives : The purpose of this study was to determine of fluoride-releasing of orthodontic resin cements containing fluoride and compare decalcification of tooth attached fluoride and non-fluoride resin cements. Methods : Total eighty premolar tooth were used in this study. Forty tooth were used for fluoride releasing measurement and forty tooth were used for decalcification measurement. Each forty tooth were randomly divided into four groups, and brackets were attached on tooth surface with Blugloo, Light Bond, Orthofolw(experimental groups) and Transbond cement(control group). After brackets were attached on tooth surface, forty tooth were immersed in artificial salival and then the quantity of fluoride releasing was measured ever day for 8days and then three-days intervals for 3 weeks. Forty tooth were immersed in decalcification solution for 48hours and then degree of decalcification was measured as lesion area, ${\Delta}F$, and ${\Delta}Q$ using QLF. The data were analysed by one-way ANOVA and Pearson's correlation coefficient using SPSS 12.0 program. Results : Fluoride release of experimental groups was higher than control group(p<0.05). Cumulative fluoride release of experimental groups was also higher than control group(p<0.05). There were the highest release during first day. ${\Delta}F$, and ${\Delta}Q$ was high TB > BG > OF > LB (p<0.05). Change of ${\Delta}F$, and ${\Delta}Q$ was also high TB > BG > OF > LB (p<0.05). As for correlation between fluoride release and lesion area, ${\Delta}F$, and ${\Delta}Q$ showed negative correlation but there was no significant difference. Conclusions : This study shows that orthodontic reins cements containing fluoride release fluoride and prevent initial enamel decalcification caused by orthodontic treatment.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.667-675
• /
• 2020

An Alum-sludge based adsorbent (ASBA) was synthesized by the hydrothermal treatment of alum sludge obtained from settling basin in water treatment plant. ASBA was applied to remove fluoride and arsenic in artificially-contaminated aqueous solutions and mine drainage. The mineralogical crystal structure, composition, and specific surface area of ASBA were identified. The result revealed that ASBA has irregular pores and a specific surface area of 87.25 ㎡ g-1 on its surface, which is advantageous for quick and facile adsorption. The main mineral components of the adsorbent were found to be quartz(SiO2), montmorillonite((Al,Mg)2Si4O10(OH)2·4H2O) and albite(NaAlSi3O8). The effects of pH, reaction time, initial concentration, and temperature on removal of fluoride and arsenic were examined. The results of the experiments showed that, the adsorbed amount of fluoride and arsenic gradually decreased with increasing pH. Based on the results of kinetic and isotherm experiments, the maximum adsorption capacity of fluoride and arsenic were 7.6 and 5.6 mg g-1, respectively. Developed models of fluoride and arsenic were suitable for the Langmuir and Freundlich models. Moreover, As for fluoride and arsenic, the increase rate of adsorption concentration decreased after 8 and 12 hr, respectively, after the start of the reaction. Also, the thermodynamic data showed that the amount of fluoride and arsenic adsorbed onto ASBA increased with increasing temperature from 25℃ to 35℃, indicating that the adsorption was endothermic and non-spontaneous reaction. As a result of regeneration experiments, ASBA can be regenerated by 1N of NaOH. In the actual mine drainage experiment, it was found that it has relatively high removal rates of 77% and 69%. The experimental results show ASBA is effective as an adsorbent for removal fluoride and arsenic from mine drainage, which has a small flow rate and acid/neutral pH environment.