• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.135-143
• /
• 2011

In the Doritaenopsis hybrid, like most of the orchid species and hybrids, temperature is crucial for the vegetative-to-reproductive transition, and low temperature is required for bud differentiation. To understand the molecular mechanism of this process, an orchid GIGANTEA (GI) gene, DhGI1, was isolated and characterized by using the rapid amplification of cDNA ends (RACE) PCR technique. Sequence analysis showed that the full-length cDNA is 4,022 bp with a major open reading frame of 3,483 bp, and the amino acid sequence showed high similarity to GI proteins in Zea mays, Oryza sativa, Arabidopsis thaliana and other plants. Semi-quantitative RT-PCR revealed that DhGI1 was expressed throughout development and could be detected in roots, stems, leaves, peduncles and flower buds. The expression level of DhGI1 was higher when the plants were flowering at low temperature (22/$18^{\circ}C$ day/night) than the other growth stages. Further analysis indicated that the accumulation of DhGI1 transcripts was significantly increased at low temperature, and concomitantly, initiation of the peduncle was observed. However, DhGI1 levels were low under high temperature (30/$25^{\circ}C$) conditions, and flower initiation was inhibited. These results indicate that the expression of DhGI1 is regulated by low temperature and that DhGI1 may play an important role in inflorescence initiation in this Doritaenopsis hybrid at low temperatures.

• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.427-431
• /
• 2006

In vitro high-frequency plant regeneration of Muscari comosum var. plumosum through somatic embryogenesis was obtained via two developmental pathways: direct embryos and multiple shoots regenerated from embryogenic callus. Flower bud with pedicel, receptacle, petal and ovary wall, floral stalk and leaf as explants were cultured in MS medium supplemented with various plant growth regulators. Embryos formed directly from pedicel, receptacle and floral stalk. Depending on explant sources, the optimal medium was MS medium supplemented with 0.2 mg/L IBA and 0.3 mg/L BA, 3.0 mg/L IBA and 3.0 mg/L BA, and MS-free medium for pedicel, receptacle, and floral stalk, respectively. Multiple shoots regenerated from embryogenic cal]i which was initiated from petal, ovary and leaf were observed in MS medium with different concentrations and combinations of hormone. The most suitable medium for each type of explant was 3.0 mg/L IBA and 3.0 mg/L BA(petal and ovary) and 5.0 mg/L IBA and 5.0 mg/L BA (leaf) Furthermore, the combination of 0.1 mg/L 2,4-D and 1.0 mg/L BA was also good for all sources of explants not only for direct embryo formation, but also, for embryogenic callus induction.

• Horticulture, Environment, and Biotechnology : HEB
• /
• v.59 no.6
• /
• pp.815-826
• /
• 2018

The intense drought affecting olive production in Northern Chile underscores the need to research non-traditional irrigation strategies to obtain the best crop performance. Accordingly, this study aimed to obtain preliminary data to guide future research on this topic. Different water replenishment levels on crop evapotranspiration ($ET_c$ ; 13.5, 27.0, 40.5, and 54%) were established in a young orchard, cv. Arbequina, from the end of fruit drop (EFD) to full bloom in the next season. We evaluated the influence of plant water status (${\Psi}_{stem}$ ) and crop load, considered as function of fruit number divided by trunk cross-sectional area, on reproductive and productive variables using multiple linear regressions. Our results show that crop load and ${\Psi}_{stem}$ measured from EFD to harvest affected yield components. Nevertheless, ${\Psi}_{stem}$ had the strongest influence on fruit size, pulp development, oil accumulation, and yield. Oil content and yield were reduced by 54% and 50% for each MPa, respectively, from ${\Psi}_{stem\;EFD-H}$ -1.8 MPa, an effect that intensified as crop load increased. During the period of flower development (September-November), the number of flowers per inflorescence and percentage of perfect flowers were reduced when ${\Psi}_{stem}$ was less than -2.0 MPa. These preliminary results showed that bud differentiation, inflorescence and flower formation are highly sensitive to water deficit.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.5
• /
• pp.319-322
• /
• 1998

Culture conditions for high frequency embryogenesis and plant regeneration in anther cultures of various F$_1$ hybrid and homozygous lines of pepper (Capsicum annuum L.) are described. Anthers pigmented less than halfway from the distal end were dissected from the flower bud in which petals elongated 2 mm higher than the receptacle. They were placed on Dumas medium supplemented with 0.1 mg/L 2,4-D and 0.1 mg/L kinetin. After four weeks of culture, embryos began to appear on anthers. After eight weeks of culture, frequencies of embryo formation reached up to 58.3%. Upon transfer to MS basal medium, greater than 95% of embryos developed into plantlets.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.9-14
• /
• 2010

This study was conducted to examine the effects of IAA and kinetin on induction of gemmae and gametophytes in Hypnum plumaeforme moss during tissue culture. Explants were obtained from sterilized gametophyte tips cultured on solid basal medium containing Knop's major salts and Nitsch and Nitsch's trace elements. After culture, inoculated gametophyte tip produced protonema firstly, changed to new gametophytes after four weeks. Aseptic gametophytes were chopped and inoculated on the same media containing 0.01, 0.1, 1 and $10{\mu}M$ of IAA and kinetin. As a result, secondary protonemata as well as protonemal gemmae were formed from gametophytes. But protonemal gemmae formation was varied according to the concentration of IAA and kinetin. Lower concentration of IAA and kinetin promoted gemma formation and bud induction. Especially, $0.01{\mu}M$ of kinetin showed the highest frequency of bud and gemma production. All the materials, obtained from $0.01{\mu}M$ kinetin medium, were subcultured to media supplemented with 0.01, 0.1, 1 and $10{\mu}M$ of IAA and kinetin again to induce gametophytes. After subculture, protonema and calli were developed from secondary protonema, and induced gametophytes finally. IAA regulated induction and growth of gametophytes, and kinetin influenced gemma formation and gametophyte induction also. All aspects of development of this moss species were governed by the external growth regulators.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.420-428
• /
• 2015

The majority of cultivated varieties of grape have perfect flowers that are clustered in an individual inflorescence. Grape flower has a single pistil, five stamens, a protective flower cap (calyptra), and a calyx. After fertilization, an individual flower develops into a single berry. Although there are a number of reported studies focusing on berry formation, berry enlargement, and sugar accumulation in grape, the morphological studies of flower, including gametophyte morphogenesis and structural change in floral organs, have not yet been studied in detail. In this study, we investigated the flower structure and development characteristics of grape using microscopy and defined the floral development stages 9 to 13 based on microspore or male gametophyte development stage from tetrad to mature pollen. We used seeded diploid table grapes 'Campbell Early' (Vitis labruscana) and 'Tamnara' (V. spp.) as plant materials. At floral development stage 9, pollen mother cells develop to tetrads. During floral development stages 10 to 11, unicellular microspore develop to mid bicellular pollen. At the end of floral stage 12, male gametophyte develops to mature tricelluar pollen. In floral stage 13, the flower cap falls off and flower bud opens. During floral development stages 9 to 12, there were no major changes in calyx length, whereas the length of the flower cap continuously increased. The flower cap-to-calyx length ratio was 2.0, 3.0, 4.5, and 6.5 at floral stages 9, 10, 11, and 12, respectively. The flower cap-to-calyx length ratio was consistent in the two grape cultivars, suggesting that the ratio is a morphological character representing floral development stage. This study provides a reference for determining floral development stage of the two grape cultivars. It will be useful for the determination of optimum time for microspore culture needed to generate doubled haploid lines and appropriate gibberellic acid treatment needed to induce parthenocarpic fruit development in 'Tamnara' grape.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.382-389
• /
• 2005

This study was conducted to establish the system of effective in vitro propagation by various explant sources culture of Bippeastrum hybridum Hort, 'Dazzler'. We tested the effects of optimal explant source, plant growth regulators on bulblet formation and plant regeneration. Callus was readily produced on the different tissues excised from floral buds whereas, bulbs and shoots were formed only on pedicel explants as compared with anthers, styles and ovaries. Pedicel is the best optimal explant for in vitro propagation. Two distinct pathways, organogenesis through callus and direct bulblet formation, could be recognized in pedicel culture. Up to the $80-100\%$ of bulblet formation and shoot organogenesis from the pedicel in fifteen days before anthesis were effectively induced by MS medium supplemented with 0.5 mg/L NAA and 1.0 mg/L BA. Plantlet regeneration was successfully achieved from pedicel-derived callus, via shoot bud induction or direct bulblet formation. The bulblets with blooming flower were produced within 2 years.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.87-96
• /
• 2018

BACKGROUND: The vigorous shoot growth in upper part of apple tree canopy leads to poor fruit quality and flower bud formation in lower part of canopy. So, this study was conducted to develop the proper control method about the shoot growth in upper part of apple tree canopy. METHODS AND RESULTS: Trunks of 'Fuji'/M9 apple trees were cut (back pruned) to 2.5 m in tree height on 11 February (dormant) or 12 April (full bloom). Naphthalene acetic acid (NAA) was applied at 2.0% to cut surface when trunk was pruned. Prohexadione-calcium (Pro-Ca) was sprayed at 250 mg/L above 2.0 m in tree height at 23 April (petal fall). The NAA or Pro-Ca application after trunk was pruned at dormant (TR-2 and TR-3) significantly reduced shoot growth in upper part of canopy compared with the control (tree was only pruned at dormant, TR-1), but the percent of shoots showing the secondary growth of TR-3 was higher over 2 times than that of TR-2. The reduction of shoot growth in upper part of canopy by TR-2 and TR-3 increased the fruit red color from the lower part in the treating year and blooming of the lower part in the following year. CONCLUSION: Applying 2.0% NAA to cut surface of pruned apple trunk at dormant was the most effective way for stabilization of the tree vigor in upper part of the canopy in a high density apple orchard.

• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.337-340
• /
• 2004

In April of 2003, the gray mold disease caused by Botrytis cinerea was occured in zinnia seedlings grown in greenhouse at Gyeongsangnam-do Agricultural Research and Extension Services, and farmer's nursery. The symptoms of infected plants were started with water-soaking lesions in flower bud, leaves and stems. The lesions gradually expanded and infected plants became withered and discolored to gray or dark from the tip. The conidia and mycelia of the pathogen were appeared on flowers, leaves and stem. The conidia were gray, 1-celled, mostly ellipsoid or ovoid in shape and were 5${\sim}$16 ${\times}$ 4${\sim}$8 ${\mu}m$ in size. Conidiophores were 12${\sim}$28 ${\mu}m$ in size. The pathogenic fungi formed sclerotia abundantly on potato dextrose agar. The optimum temperature for sclerotial formation was $20^{\circ}C$. Pathogenicity of the causal organism was proved according to Koch's postulate. The causal organism was identified as Botrytis cinerea Persoon: Fries based on mycological characteristics. This is the first report on gray mold of Zinnia elegans caused by Botrytis cinerea in Korea.