• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.952-964
• /
• 1992

The interaction of natural convection and radiation heat transfer in a two dimensional square enclosure containing absorbing, emitting and linear anisotropically scattering gray medium is numerically analyzed. P-1 and P-3 approximation is introduced to calculate radiation heat transfer. The effects of scattering albedo, wall emissivity, scattering anisotropy, and optical thickness on the characteristics of the flow and temperature field and heat transfer are investigated. Temperature and velocity profiles depend a great deal on the scattering albedo, and the importance of this effect increases with decrease in albelo. Planck number is another important parameter in radiation heat transfer. The increase in scattering albedo increases convection heat transfer and decreases radiation heat transfer at hot wall. However, the increase in scattering albedo decreases both convection and radiation heat transfer at cold wall. The increase in optical thickness decreases radiation heat transfer. The scattering anisotropy has important effects on the radiation heat transfer only. The highly forward scattering leads to an increase of radiation heat transfer whereas the highly backward scattering leads to an decrease of radiation heat transfer. The effect of scattering anisotropy decreases when reducing the wall emissivity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.9
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1062-1073
• /
• 2004

We describe a looper controller design for a hot strip finishing mill in steel plants. The main function of the looper system is to balance the mass flow of the strip by accumulating material in the middle of the stands. Another function is to control the strip tension which influences the width of the strip. To ensure strip quality, it is very important to control the tension of the hot strip finishing mill. However, because there is a mutual interaction between the looper angle and the strip tension, it is difficult to control the looper system. Previous researches examined only the operation of a single stand. But it is not sufficient to examine the operation and effect of whole stands because the operation is wholly interdependent. In this paper, we present a full model of the hot strip finishing mill in order to more effectively control strip tension. We propose several control methods for the full-stand hot strip finishing mill, denoted as conventional PI, PI with cross gain, and coefficient diagram method (CDM) PID control. In the real plants, there are some problems by using higher order controllers such as LQ, LQG and H$\_$$\infty$/. By comparison, the PID controller is very simple and easy to apply to all real plants. To that end, we present our findings on PID controls and their potential use in the hot strip finishing mill.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.27-36
• /
• 2009

PSTN (public switched telephone network) provides voice communication service, whereas IP network provides data oriented service, and we can use IP network for multimedia transport service (e.g. voice over IP service) with economic price. In this paper, we propose RoIP (robot on IP) service scenario, signaling call flow, and implementation to provide home automation and monitoring service for remote site users. In our scheme, we used a extended SIP (session initiation protocol) for signaling protocol between remote site users and home robots. For our bearer transport control, we implemented H.263 video codec over RTP (real-time transport protocol) and additionally DTMF (dual tone multi-frequency) transport for robot actuator control. We implemented our scheme on home robots and experimented with KTF operator network, and it shows good communication quality (average MOS = 9.15) and flexible robot controls.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.494-502
• /
• 2016

The accurate assessment of hull-appendage interaction in the early design stage is important to control the inflow to the propeller plane, which can cause undesirable hydrodynamic effects in terms of cavitation phenomenon. This paper describes a numerical analysis for the flow around a fully appended surface ship model for which KRISO has carried out a model test in the Large Cavitation Tunnel(LCT). This numerical study was performed with the LCT model test in a complementary manner for a good reproduction of the wake distribution of surface ships. A second order accurate finite volume method provided by a commercial computational fluid dynamics(CFD) program was used to solve the governing Reynolds Averaged Navier-Stokes(RANS) equations, where the SST $k-{\omega}$ model was used for turbulence closure. The numerical results were compared to available LCT experimental data for validation. The calculations gave good predictions for the boundary layer profiles on the walls of the empty cavitation tunnel and the wake at the propeller plane of the fully appended hull model in the LCT.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.529-538
• /
• 2021

This study aimed to identify and analyze the attributes of FoMO, and to provide basic data for the intervention of FoMO in cancer patients. In order to confirm conceptual attributes, antecedents, and consequences by applying the conceptual analysis method of Walker & Avant (2010), 82 previous studies published from 2004 to 2021 were analyzed. The conceptual attributes were relative deprivation, social exclusion, lack of sense of belonging, lack of interaction with others, negative emotions, and the antecedents were a sense of alienation when you miss the flow or when excluded from activities and the desire to connect with others. The consequences of this were increased emotional distress, triggering negative emotions such as depression and anxiety, and decreased life satisfaction and self-esteem. The attributes of these FoMO were also confirmed in cancer patients. Based on this, it is necessary to develop an effective intervention program to improve FoMO in cancer patients.

• Journal of Korea Port Economic Association
• /
• v.37 no.2
• /
• pp.1-17
• /
• 2021

Private investment projects have the characteristic of generating profits for a long period of 30 to 40 years, and fluctuations in profits and costs occur over time, so the interaction of variables over time rather than statistical models or discounted cash flows If the system dynamics technique, which enables simulation of the system, is used, it is considered that meaningful simulation results can be derived for internal and external variables. In other words, by establishing a financial feasibility comparison/verification model based on system dynamics for private investment projects in the port sector that have not been attempted before, we compare the differences with the existing cash flow discount method, macroeconomic factors, operating period, social discount rate We will conduct a differentiated study that has not been tried before by simulating how the interrelationships of such variables affect the change in financial performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.699-708
• /
• 2021

In this paper, the aerodynamic and aeroacoustic characteristics that vary depending on the rotation axial distance between the upper and lower rotor, which is one of the design parameters of the coaxial rotor, is analyzed in the hovering condition using the computational fluid dynamics. Aerodynamic analysis using the Reynolds Averaged Navier Stokes equation and the aeroacoustic analysis using the Ffowcs Williams ans Hawkings equation is performed and the results were compared. The upper and lower rotor of the coaxial rotor have different phase angle which changes periodically by rotation and have unsteady characteristics. As the distance between the upper and lower rotors increased, the aerodynamic efficiency of the thrust and the torque was increased as the flow interaction decreased. In the aeroacoustic viewpoint, the noise characteristics radiated in the direction of the rotational plane showed little effect by axis spacing. In the vertical downward direction of the axis increased, the SPL maintains its size as the frequency increases, which affects the increase in the OASPL. As the axial distance of the coaxial rotor increased, the noise characteristics of a coaxial rotor were similar with the single rotor and the SPL decreased significantly.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.50-59
• /
• 2019

Experimental and numerical studies on the fire characteristics according to the distance between the fire source and sidewall under the over-ventilated fire conditions. A 1/3 reduced ISO 9705 room was constructed and spruce wood cribs were used as fuel. Fire Dynamics Simulator (FDS) was used for fire simulations to understand the phenomenon inside the compartment. As a result, the mass loss rate and heat release rate were increased due to the thermal feedback effect of the wall in the compartment fire compared to the open fire. As the distance between the fire source and sidewall was reduced, the major fire characteristics, such as maximum mass loss rate, heat release rate, fire growth rate, temperature, and heat flux, were increased despite the limitations of air entrainment into the flame. In particular, a significant change in these physical quantities was observed for the case of a fire source against the sidewall. In addition, the vertical distribution of temperature was changed considerably due to a change in the flow structure inside the compartment according to the distance between the fire source and sidewall.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.267-274
• /
• 2021

The purpose of this study is to derive design factors to provide inclusive information without encouraging the division of region and ideology, and to present the prospects of election result infographics design through evaluation and interpretation of the based design factors. First, the methods and results of the study identify the characteristics of infographics design through theoretical considerations to confirm the importance of visualizing data, and the case study of infographics design as the main flow is cathogram-style design using various forms of digital interaction. Second, the 21 st National Assembly election of Korea resulted in the response to infographics design and evaluated and analyzed the suitability of design factors through surveys and expert interview for five designs selected (suitable for purpose, convenient, aesthetic, easy of understanding, and public concern). In conclusion, it is predicted that the election results infographics design will evolve to offset regional and ideological division by providing inclusive information tailored to consumer needs by providing different types of infographics designs that meet basic objectives and functions.