• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• 한국가구학회지
• /
• 제17권2호
• /
• pp.49-56
• /
• 2006

This research was carried out to examine the FIR (far-infrared rays) emissivity and emission power of five types of flooring board by the mixing ratio of charcoal and loess, and the physical property of five types of injected flooring board by the amount of mixture. Type D was appeared the most high value of FIR emissivity and emission power. But there was a little difference among the five types of flooring board values. In physical properties, control type flooring board and injected flooring board showed a similar tendency. Among the domestic trees, all of hard wood seems to be used to surface wood for strong hardness flooring board. But a coniferous tree was not.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.213-214
• /
• 2019

Oriented strand board(O.S.B) is used in many areas, such as interior and interior finishes of wooden houses, but no cases and studies have been used as flooring materials for flooring boards. In this study, we will examine the quality and performance of the aromatic strands board, which we believe can be substituted for the plywood, and analyze its suitability as a floorboard.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.171-172
• /
• 2017

There is some recognition that Decoration Wood-based Flooring Board in Korea is a material that inhibits the heat transfer from the substrate to the room. There is a lack of substantial research literature on the surface heat transfer and condition of Decoration Wood-based Flooring Board, which is insufficient to deal with false perceptions. In this study, the purpose of this study is to analyze the surface heat transfer characteristics of Decoration Wood-based Flooring Board and to obtain basic data to cope with recognition.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.23-29
• /
• 2005

대표적인 고부가가치 목질판상 재료인 마루판은 육안 분류 작업에 의한 오차로 마루판 시공 시에 무늬목간의 색상 차가 생기고 있다. 이는 조건등색(metamerism)에 의해 식별 후 혹은 마루판 시공 시에 오차가 큰 것으로 나타났다. 따라서 본 연구에서는 Light와 Dark 두 단계로 육안 식별한 피나무, 자작나무, 단풍나무 3수종의 무늬목을 사용한 마루판을 CIELAB를 이용하여 분류하고, CIERGＢ에서 각각의 문턱 값(threshold)을 조사하고, 인간의 색 인지에 기반을 둔 HSI (hue, saturation, intensity)색상모델을 응용하여 색상, 채도, 명도 값의 범위를 조사하였다. HSI색상모델의 색상과 채도, 명도를 이용하여 마루판의 색상분류에 사용할 경우 명도 값을 이용하는 것이 유리할 것으로 보인다. 그리고 색상의 범위가 3종류 모두 $45{\sim}55^{\circ}$ 사이 범위 값을 가지고 있는 것으로 보이며, RGB성분의 문턱값을 이용한 분류의 경우 특정 색상 성분 값만으로는 마루판 무늬목의 분류가 어려울 것으로 보인다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.397-402
• /
• 2008

In this study, we analyzed the ignitibility of the wooden floorings used as the finishing materials for interior with the flammability tester and the ignition point tester. Also we analyzed the limit oxygen index(LOI) using the oxygen index tester and the flame resistance of the wooden floorings. We confirmed that all of the samples had a excellent flame resistance. The ignitibility of the floorings were ranked as the material lumber>the strengthening flooring>the veneer board(1)>the veneer board(2).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.180-181
• /
• 2022

The higher the addition rate, the less difference in kneading was found. This is because most of the cases are mixed with vinyl gloves by hand when immediately mixed in the field, so there is no problem of mixing dough according to the amount of addition. The mean increase temperature for 20 minutes was 31.6℃ for Plain, 38.1℃ for Al, 33.7℃ for Cu, and 5~7℃ for Al 20% added sample, 38.1℃ for Al 20% added sample, but 36.6℃ for Al 5% added sample. This suggests that it is possible to improve its own heat transferability by adding metal powder to epoxy adhesives.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.205-206
• /
• 2021

A comparative analysis of wear resistance and shock resistance tests shows that wear resistance is up to 6 times and at least 2 times higher wear resistance than current products, even considering the limited number of turns due to too much rotation. In the case of shock resistance, there was no problem except 7.5T, but this is only a result of KS test method, so it is deemed that additional fall impact tests by various objects in daily life are needed for practical comparison.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.178-179
• /
• 2021

Comparing the absorption volume of test pieces immersed over time in room temperature moisture with weight, WF absorbed about 40% more than PLAIN, and PLAIN stopped absorbing after 10 minutes, but WF continued to absorb. It is thought that the woven fabric layer of the core material continued to absorb moisture. In the heat transfer test, the test piece to which only WF was applied had a temperature difference of about 2℃ compared to PLAIN, and when the insulating liquid was sprayed, there was a difference in heat transfer properties of up to 5℃. This is judged to have low heat transfer properties of the basic woven fabric, but the heat insulating liquid also further reduces heat transfer properties.

• Journal of the Korean Wood Science and Technology
• /
• 제28권1호
• /
• pp.28-35
• /
• 2000

본 연구는 재면이 약한 낙엽송재의 재질개량의 일환으로 경도와 내마모성 등 표면성능의 개선을 도모하기 위한 표면 강화처리기술을 개발하기 위하여 수행되었다. 본 연구에서는 2가지의 도장법을 적용하였다. 첫째, UV경화형 에폭시아크릴에트수지도료에 관능성 모노머와 내마모제를 첨가하였으며, 둘째, 불포화폴리에스테르수지도료를 밑칠용으로 그리고 내마모제가 첨가된 아크릴수지도료를 마감칠로 사용하였다. 제 1도장법에 의해 표면경도가 2H에서 3H로 개선되었으며, 제 2도장법에 의해 4H로 크게 개선되었으며 내마모성도 향상되었다. 이들 처리에 의해 충격에 의한 도막의 갈라짐은 거의 발생하지 않았다. 제 2도장법에 의한 표면강화처리 마루판은 케루잉재의 대체재로서 중보행용의 실내 마루판으로 이용 가능한 것으로 시사된다.