• Journal of Korea Water Resources Association
• /
• v.51 no.5
• /
• pp.405-415
• /
• 2018

Hydraulic variables such as discharge coefficient, gate opening, and upstream water depth are required to calculate the discharge of vertical lift gate. It is very important for a precise gate design, because it may affect the rest, to predict the behavior of gate opening during operation. In this study, an equation by which gate opening could be predicted with any upstream water depths was derived from the relation between the calculated value from buoyancy theory and measured one from experiment for a floating gate model. Downpull force was the reason for the differences between the calculated and the measured and it was verified using pressure coefficient. Also, the relation of discharge coefficient with gate opening ratios was derived. The derived relations were used for flood routing and it was realized that downpull force effect should be fully taken into account during gate design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.96-96
• /
• 2022

가상현실 (Virtual Reality, VR) 기술은 3차원 가상공간 내에서의 높은 몰입감에 기반한 체험을 바탕으로 다양한 분야에서 활용되고 있다. 소방훈련이나 태풍, 지진 등 재해 대응훈련과 같이 인명피해의 위험이 있는 재해에 대한 VR 기술을 활용한 방재교육은 위험성을 동반하지 않으면서도 현장감에 기반한 높은 교육적 효과를 창출할 수 있다. 한국전자통신연구원에서는 VR 기술을 이용하여 소방훈련을 위한 실감 소방훈련 시뮬레이터를 개발한 바 있으며 목동재난체험관에서는 홍수, 태풍, 지진 등 다양한 재해에 대한 안전교육을 위한 자연재해 가상현실체험을 운영하고 있다. 이외에도 전국 지자체 및 교육청에서는 방재교육을 목적으로 VR 기술을 활용하고 있다. 그러나 기존의 VR을 활용한 수재해 방재교육은 범람의 수리학적 특성과 함께 수해지의 지형적 특성을 적절히 반영하지 못하는 단점을 가지고 있다. 이는 방재교육이나 경각심을 부각하는 데엔 효과적이나 실질적인 방재 가이드라인을 제시하는 데엔 한계가 있다. 본 연구는 몰입형 파랑해석모형인 Celeris Base를 기반으로 3차원 가상현실 시각화를 활용한 수리학적 홍수추적 모형을 개발하였다. 3차원 가상현실 시각화는 Unity3D를 이용하여 모의환경 내에 구현되었다. 강우-유출 과정의 수리학적 해석을 위해 동수역학 수치모형의 연속방정식 내에 강우와 침투에 대한 항을 추가하였다. 침투모형으로는 Horton 모형, Green-Ampt 모형과 함께 사면의 기울기를 고려한 Green-Ampt 모형을 적용하였다. 실제 유역에서의 홍수추적 모의결과는 관측값과 비교적 잘 일치함을 확인하였다. 개발된 모형은 VR 방재교육을 통해 일반인의 수재해 대응능력 향상에 기여함과 동시에 정확성 높은 홍수추적 모의결과에 기반한 홍수대책 마련에도 활용 가능할 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.385-398
• /
• 2003

The concept of the effective storage ratio has been suggested to determine the size of detention pond by the previous researchers. The 11 pump - pond facilities in Dongdu-chun city were selected to analyze the critical duration for design rainfall and the storage ratio for each rainfall duration in this study It has been then found that the criteria of the maximum storage ratio is not reasonable for determining the size of detention pond because the difference of storage ratio with respect to each rainfall duration is too small. Moreover, since the size of pond compared with the pump capacity is not always big enough, the pump should be frequently operated, which may result in pump failure. Thus, the pond should be sufficiently sized to prevent the possibility of the pump failure due to frequent operation. According to the analyses for changing pump capacity, it has been found that if the function of the pond compared with the pump is concentrated, determining the size of pond based on the storage ratio is operationally feasible for even small basin. Thus, an improved procedure based on the storage ratio for determining the size of detention pond in small basin has been suggested. The results by the proposed procedure considering pump switching frequency may lead to reasonable pump operation. A simple linear programming model has been also adopted to figure out the relationship between pump capacity and pond size. It has been shown that the determination lot the size of detention pond based on conventional hydrologic flood routing in pond is feasible for only urban districts not rural areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.404-411
• /
• 2019

In this study, the HEC-HMS was applied to determine rainfall-runoff processes for the Gokgyuchun basin. Several sub-basins have large-scale reservoirs for agricultural needs and they store large amounts of initial runoff. Three infiltration methods were implemented to reflect the effect of initial loss by reservoirs: 'SCS-CN'(Scheme I), 'SCS-CN' with simple surface method(Scheme II), and 'Initial and Constant rate'(Scheme III). Modeling processes include incorporating three different methods for loss due to infiltration, Clark's UH model for transformation, exponential recession model for baseflow, and Muskingum model for channel routing. The parameters were calibrated using an optimization technique with trial and error method. Performance measures, such as NSE, RAR, and PBIAS, were adopted to aid in the calibration processes. The model performance for those methods was evaluated at Gangcheong station, which is the outlet of study site. Good accuracy in predicting runoff volume and peak flow, and peak time was obtained using the Scheme II and III, considering the initial loss, whereas Scheme I showed low reliability for storms. Scheme III did not show good matches between observed and simulated values for storms with multi peaks. Conclusively, Scheme II provided better results for both single and multi-peak storms. The results of this study can provide a useful tool for decision makers to determine master plans for regional flood control management.

• Explosives and Blasting
• /
• v.21 no.3
• /
• pp.23-35
• /
• 2003

An analytical diffusion model for flood routing with backwater effects and lateral flows is developed. The basic diffusion equation is linearized about an average depth of (H + h), and is solved using the boundary conditons which take into account the effects of backwater and lateral flows. Scouring phenomenon around pier which affects on the support function of pier and the stabilization if river bed is a complex problem depending on flow properties and river bed state as well as pier geometry. therefore, there is no uniting theory at present which would enable the designer to estimate, with confidence, the depth of scour at bridge piers. The various methods used in erosion control are collectively called upstream engineering, HEC-RAS Model, underwater blasting. They consist of reforestation, check-dam construction, planting of burned-over areas, contour plowing and regulation of crop and grazing practices. Also included are measures for proper treatment of high embankments and cuts and stabilization of streambanks by planting or by revetment construction. One phase of reforestation that may be applied near a reservoir is planting of vegetation screens. Such screens, planted on the flats adjacent to the normal stream channel at the head of a reservoir, reduce the velocity of silt-laden storm inflows that inundate these areas. This stilling action causes extensive deposition to occur before the silt reaches the main cavity of the reservoir.

• Journal of Korea Water Resources Association
• /
• v.41 no.1
• /
• pp.65-74
• /
• 2008

The small and medium sized dams have the fill dam type of a lot of occasions, which are often weak in cases of major floods. For this reason, although a countermeasure is in great need, due to the importance of the facilities and financial situations, no direct safety measures have been taken. In this study, in order to minimize construction expenditure for practical safety measures in cases of major floods, the overflow section of spillway has been analyzed focusing on how the overflow capacity will increase in the case of partially rebuilding a part of the overflow section of spillway favorable for hydraulic conditions. The Labyrinth weir and movable weir was chosen for reconstruction models of the overflow section. Moreover, for analyzing the after-effects of the reconstruction, a small scale dam was temporarily chosen for various experiments such as the hydraulic model testing and the three dimension numerical evaluation through the use of Flow-3D.