• 소성∙가공
• /
• 제12권2호
• /
• pp.116-122
• /
• 2003

In the Prestressed die design for cold working, many constraining conditions should be considered to insure the die safety and to improve the dimension accountancy products. Among the constraining conditions, yielding conditions, diameter ratios and interferences between rings are very important. . In this paper, therefore, flexible tolerance method was used in order to search the optimum values of design variables. The maximum inner pressure is used as objective function in this numerical analysis. In the design Process, it was also involved the safety factor to the yield strength of each ring by considering the allowable tensile or compressive hoop stress in each ring. The proposed technique has been applied to the die design of backward extrusion process, and it's analytical results have been compared with that of the conventional design method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.1003-1019
• /
• 2019

Threshold ring signature scheme enables any t entities from N ring members to spontaneously generate a publicly verifiable t-out-of-N signature anonymously. The verifier is convinced that the signature is indeed generated by at least t users from the claimed group, but he cannot tell them apart. Threshold ring signatures are significant for ad-hoc groups such as mobile ad-hoc networks. Based on the lattice-based ring signature proposed by Melchor et al. at AFRICRYPT'13, this work presents a lattice-based threshold ring signature scheme, employing the technique of message block sharing proposed by Choi and Kim. Besides, in order to avoid the system parameter setup problems, we proposed a message processing technique called "pad-then-permute", to pre-process the message before blocking the message, thus making the threshold ring signature scheme more flexible. Our threshold ring signature scheme has several advantages: inherits the quantum immunity from the lattice structure; has considerably short signature and almost no signature size increase with the threshold value; provable to be correct, efficient, indistinguishable source hiding, and unforgeable.

• Journal of Chest Surgery
• /
• 제43권5호
• /
• pp.475-481
• /
• 2010

배경: 퇴행성 승모판막역류증으로 승모판막성형술을 받은 환자들 중에서 partial flexible band를 이용한 경우와 complete rigid ring을 이용한 경우의 중기 성적을 비교해 보고자 하였다. 대상 및 방법: 2004년 1월부터 2008년 9월 사이에 단독 승모판막역류증으로 승모판막수술을 받은 112명의 환자 중 퇴행성 질환으로 확진되고, 승모판막성형술 및 승모판막륜 링 삽입술을 시행 받은 71명의 환자(남:여=36:35, $55{\pm}13$세)를 대상으로 하였다. 환자들을 승모판막륜성형술에 partial flexible band를 이용한 I군(43명)과 Complete rigid ring을 이용한 II군(28명)으로 나누어 단기 및 중기 성적을 비교하였다. 두 군 간의 수술 전 특성에는 유의한 차이가 없었다. 추적관찰 기간의 중앙값은 36개월(2~69개월)이었다. 결과: 수술관련 사망은 없었으며, 심방세동(n=7), 저심박출 증후군(n=5)과 같은 수술 관련 합병증의 발생은 두 군 간 발생률의 차이가 없었고, II군에서 만기 사망이 1예 있었다. 4년 승모판막역류재발 자유 생존률은 I군과 II군에서 각각 94.5%와 91.8%였다(p=0.695). 좌심실 구출율은 수술 후 조기($7{\pm}2$일)에는 저하 되었고, 최종 추적관찰 시점($25{\pm}16$개월)에서 회복되었다(p=0.002). 이런 변화 추세는 양군에 차이가 없었다(p=0.905). 재수술은 3명의 환자(I군에서 1예, II군에서 2예, p=0.905)에서 시행되었다. 4년 판막 관련 사건 자유 생존률은 두 군 간에 차이가 없었다(I군 95.2% vs II군 92.6%, p=0.646). 결론: 승모판막륜 성형술에 사용되는 판막륜 링의 종류는 퇴행성 승모판막 역류증에 대한 승모판막 성형술의 중기 임상성적 및 기능결과에는 영향을 주지 않았다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.19-22
• /
• 2003

In this study, the design of prestressed die for spur gear forging have been investigated. The stress concentration at notch of the die insert is very important in the design of die for the forging of spur gear such as non-axisymmetric geometry. In the previous study, the flexible tolerance method was used in order to search the optimal value of design variables considering the constrain conditions. In the design process, it was also involved the safety factor to the yield strength of each ring by considering allowable tensile or compressive hoop stress in each ring. Using this technique, the die deign for spur gear forging has been successfully performed without yielding of the die after shrink fitting and during forging.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.99-106
• /
• 2001

The design for cold extrusion dies is very important, because the die insert is subjected to very high radial and hoop stresses. The design of cold extrusion dies has many constrained conditions. In this paper, the used assumptions are such that the yield strength of each ring is selected according to the allowable tensile or compressive hoop stress in each ring and the maximum allowable inner pressure, when yielding occurs in one ring of the dies, is obtained by the proposed equation. In order to obtain design variables, such as diameter ratios and interferences, using the maximum inner pressure, the flexible tolerance method was used for shrink-fitted thick-walled cylinders. ANSYS APDL was used to perform the repeated analysis of deformation of the dies due to the variation of the design variables. The response surface methodology is utilized to analyze the relationship between the design variables and the maximum radial displacement of the die insert during extrusion. From the results, it is found that outer diameter of the die Insert has the largest effect on the minimization of maximum radial displacement at the inner surface of the dies.

• 상하수도학회지
• /
• 제26권6호
• /
• pp.907-914
• /
• 2012

Flexible pipes take advantage of their ability to move, or deflect, under loads without structural damage. Common types of flexible pipes are manufactured from polyethylene (PE), polyvinyl chloride (PVC), steel, glass fiber reinforced thermosetting polymer plastic (GFRP), and aluminum. In this paper, we present the result of an investigation pertaining to the short-term behavior of buried polyethylene pipe. The mechanical properties of the polyethylene pipe produced in the domestic manufacturer are determined and the results are reported in this paper. In addition, vertical ring deflection is measured by the laboratory model test and the finite element analysis (FEA) is also conducted to simulate the short-term behavior of polyethylene pipe buried underground. Based on results from soil-pipe interaction finite element analyses of polyethylene pipe is used to predict the vertical ring deflection and maximum bending strain of polyethylene pipe.

• Journal of Information Display
• /
• 제12권1호
• /
• pp.1-4
• /
• 2011

A complementary inverter was fabricated using pentacene and N-N -dioctyl-3,4,9,10-perylene tetracarboxylic diimide-C (PTCDI-C8) for p- and n-type transistors on a poly(ether sulfone) substrate, respectively. The mobilities of the p- and n-type transistors were 0.056 and 0.013 $cm^2$/Vs, respectively. The inverter, which was composed of p- and n-type transistors, showed a gain of 48.6 when $V_{DD}$ = -40V and at the maximum noise margin of $V_{DD}$/2. A ring oscillator was also fabricated by cascading five inverters. The five-stage ring oscillator showed the maximum output frequency of 10 kHz when $V_{DD}$ = -170 V.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.643-649
• /
• 2011

LNG 선박에 사용되는 초저온용 버터플라이 밸브의 개발에 있어, 누설검증은 가장 중요한 설계공정 중 하나이다. 초저온에서 누설방지가 가능한 실로서 인코넬 스프링과 같은 탄성지지체가 포함된 O-링 형태의 메탈실이 널리 사용되고 있으나, 제작비가 고가인 단점을 갖고 있다. 이에 대한 대안으로 부가적인 탄성지지체 없이도 누설조건을 만족시키며, 제작비가 저렴한 탄성 메탈실의 개발이 요구되고 있다. 본 연구에서는 탄성 메탈실의 누설방지를 위한 설계조건을 정립하여, 초저온 및 고압환경에서 누설방지가 가능한 탄성 메탈실의 형상을 수치해석을 통해 고찰하였다. 아울러 이를 기반으로 시제품을 개발하고, 상온 및 초저온 상태에서 BS6755 및 BS6364 에 준하는 누설시험을 실시하여 누설여부를 확인하였다.

• 센서학회지
• /
• 제25권1호
• /
• pp.57-64
• /
• 2016

To understand a two-phase flow, a liquid film thickness is one of the important factors. A lot of researches have been performed to measure liquid film thickness with various approaches. Recently, an electrical conductance method which uses the conductivity of the liquid film has been widely applied on measuring the liquid film thickness. Though the electrical method has an advantage in high spatial resolution, as the conductivity of liquid can be affected by its temperature variation, the conventional electrical conductance methods have a limitation in being applied on varying temperature conditions where a heat transfer is involved. The purpose of this study is to develop a three-ring liquid film sensor that overcomes the limitation of the conventional method. The three-ring conductance method can measure the film thickness regardless of temperature variation by compensating the change of liquid conductivity. Considering its application on a wide range of conditions such as high temperature or curved surfaces, the sensor was fabricated on flexible printed circuit board (FPCB) in this study. This paper presents the concept of the measurement method, design procedure, prototype sensor fabrication and calibration results.

• 복합신소재구조학회 논문집
• /
• 제4권3호
• /
• pp.38-44
• /
• 2013

Glass fiber reinforced plastic (GRP) pipes buried underground are attractive for use in harsh environments, such as for the collection and transmission of liquids which are abrasive and/or corrosive. In this paper, we present the result of investigation pertaining to the structural behavior of GRP flexible pipes buried underground. In the investigation of structural behavior such as a ring deflection, experimental and analytical studies are conducted. In addition, vertical ring deflection is measured by the field test and finite element analysis (FEA) is also conducted to simulate behavior of GRP pipe buried underground. Based on the results from the finite element analyses considering soil-pipe interaction the vertical ring deflection behavior of buried GRP pipe is predicted. In addition, analytical and experimental results are compared and discussed.