• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.969-972
• /
• 2005

This paper presents a GA-fuzzy $P^2ID$ control system for the flexible-joint robot arm. This controller is designed based on the parameter adjustment using fuzzy logic and genetic algorithms. According to the simulations, the better performance has been achieved acquired that the robot moved smoothly and met its required objectives. The results of comparison between 8 parameters and 10 parameters can be conclusion that the 10 parameters have setting time little than 8 parameters. In usability can be use 8 or 10 parameters these one.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1256-1263
• /
• 2004

Output feedback passivation problem is studied when the given system is not minimum-phase or does not have relative degree one. Using a parallel connection with an additional dynamics, the authors provide a dynamic output feedback control law which renders the composite system passive. Sufficient conditions are presented under which the composite system is output feedback passive. As an application of the dynamic passivation scheme, a point-to-point control law for a flexible joint robot is presented when only the position measurements are available. This provides an alternative way of replacing the role of the velocity measurements for the proportional-derivative (PD) feedback law. The performance of the proposed control law is illustrated in the simulation studies of a manipulator with three revolute elastic joints.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.643-650
• /
• 2017

최근에 유연관절로봇의 제어는 로봇시스템에 있어서 다양한 적용가능성이 증가하고 있기 때문에 점점 그 중요성이 커지고 있다. 본 논문에서는 유연관절로봇의 제어에 있어서 적분슬라이딩모드제어기와 백스테핑제어기법을 도입하여 강인성을 증가시키는 방법을 제안한다. 슬라이딩모드제어기를 사용하여 강인성을 향상시키기 위해서는 제어대상이 정합조건을 만족시켜야 하는데 유연관절로봇은 이 조건을 만족시키지 못한다. 유연관절로봇은 링크측과 모터측으로 나누어 생각할 수 있고 각 측에 외란이 존재하나 실제입력은 모터측에 존재하기 때문에 링크측 외란은 정합조건을 만족시킬 수 없으므로 슬라이딩모드제어기로 제거하기가 어렵다. 이에 본 논문에서는 백스테핑을 도입하여 이러한 비정합 문제를 해결함으로써 링크측 외란의 영향을 제거할 수 있도록 한다. 이와 더불어 임피던스제어 성능을 가질 수 있도록 적분슬라이딩모드제어기를 함께 사용한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1128-1130
• /
• 1996

A canonical form observer design method for nonlinear systems is studied. Through this method, an observer of single link robot system with flexible joint is proposed. It is shown through simulation that the system can be stabilized when using the nonlinear feedback linearizing controller and the supposed observer.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.139-145
• /
• 2002

In this paper, we proposed an intelligent digital redesign method for a class of fuzzy-model-based controllers, effective fur stabilization of continuous-time nonlinear systems. The TS fuzzy model is used to expend the results of the digital redesign technique to nonlinear systems. The proposed method utilized the recently developed LMI technique to obtain a digitally redesigned fuzzy-model-based controller. The intelligent digital redesign problem is converted to equivalent problem, and the LMI method is used to find the digitally redesigned fuzzy-model-based controller. The stabilization conditions of TS fuzzy model are derived for stabilization in the sense of Laypunov stability. In order to demonstrates the effectiveness and feasibility of the proposed controller design methodology, we applied this method to the single link flexible-joint robot arm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.666-671
• /
• 1993

A new robust control law is proposed for uncertain rigid robots and two composite robust control laws for flexible-joint manipulators which contain uncertainties. The uncertainty, is nonlinear and (possibly fast) time-varying. Therefore, the uncertain factors such as imperfect modeling, function, payload change, and external disturbances are all addressed. Based only on the possible bound of the uncertainty, a robust controller is constructed for the rigid counterpart of the flexible-joint robot Some feedback control terms are then added to the robust control law to stabilize the elastic vibrations at the joints. To show that the proposed composite robust control laws are indeed applicable to flexible-joint robots, a singular perturbation approach and the stability study based on Lyapunov function are proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.104.4-104
• /
• 2002

$\textbullet$ Contents 1 : PD control of an elastic joint robot $\textbullet$ Contents 2 Dynamic output feedback law without velocity measurements $\textbullet$ Contents 3 : Robust analysis for parameter uncertainties of the robot system $\textbullet$ Contents 4 : Simulation studies with a three joint robot system $\textbullet$ Contents 5 : Performance comparison with an another control law

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1103-1109
• /
• 2008

Since the flexible joint robots with motor dynamics are represented by the fifth-order nonlinear sγstem, it is difficult and complex to design the controller for electrically driven flexible-joint (EDFJ) robots. In this paper, we propose a simple adaptive control method to solve this problem. It is assumed that the model uncertainties of the robots dynamics, joint flexibility, and motor dynamics are unknown. For the simple control design, the dynamic surface design method is applied, and all uncertainties in the robot and motor dynamics are compensated by using the adaptive function approximation technique. It is proved that all signals in the controlled closed-loop system are uniformly ultimately bounded. Simulation results for three-link EDFJ manipulators are provided to validate the effectiveness of the proposed control system.

• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.223-233
• /
• 2008

A new output feedback controller design approach for flexible-joint (FJ) robots via the observer dynamic surface design technique is presented. The proposed approach only requires the feedback of position states. We first design an observer to estimate the link and actuator velocity information. Then, the link position tracking controller using the observer dynamic surface design procedure is developed. Therefore, the proposed controller can be simpler than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop system are uniformly ultimately bounded. Finally, the simulation results of a three-link FJ robot are presented to validate the good position tracking performance of the proposed control system.

• 전자공학회논문지SC
• /
• 제41권4호
• /
• pp.1-12
• /
• 2004

본 논문에서는 적응 퍼지 백스테핑 알고리즘을 이용하여 단일축 유연관절 로봇을 제어하는 새로운 알고리즘을 제안한다. 퍼지시스템은 일반근사기로 사용하여 로봇과 제어기의 비선형성과 불확실성을 상쇄하는 역할을 한다. 제안한 알고리즘은 추가적인 교시 제어기를 필요로 하지 않으며 추적오차를 상시유계시키는 특성이 있다. 끝으로 컴퓨터 모의실험을 통하여 제안한 방식의 성능을 확인한다.