• Korean Journal of Plant Resources
• /
• v.27 no.3
• /
• pp.229-235
• /
• 2014

Flax (Linum usitatissimum L.) has been used for the edible oil in Korea. The evaluate the effect of plant growth retardants on flaxseed yield, oil content, and gibberellin level, chloromequat chloride (CMC), paclobutrazol (PBZ), and prohexadione-Ca (PHC) were used as plant growth retardants in this study. These plant growth retardants were foliar-sprayed to flax plant at 55 days after seeding. The concentrations of each plant growth retardant were as followed: CMC 250, 500, 1000 ppm, PBZ 40, 80, 160 ppm and PHC 500, 1000, 2000 ppm. PHC treatment to forming bolls was more stimulated than CMC and PBZ. The highest ripened seed rate was observed in PHC treatment at 2000ppm. The high see yields were obtained in PHC treatment following PBZ and CMC, in turn. Seed yield that significantly increased in PBZ and PHC was found to be increased 12.4 ~ 23.9% as compared to the control. The PHC showed higher flaxseed production and oil yield than that of CMC and PBZ. The results obtained in the present study suggest that higher concentration of plant growth retardant (PHC) increased flaxseed yield and oil content. The optimal concentration of PHC treatment was observed in 2000 ppm. It concludes that the foliar application of PHC 2000 ppm may be useful for the increasing oil and higher seed production in flax plants.

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.157-168
• /
• 2019

The production of nonwoven fabrics from natural fibers is already expanding at an industrial level for simple curvature semi-structural part in the automotive industry. To develop their use for technical applications, this paper provides an experimental study of the mechanical behavior of flax-fiber nonwoven preforms. A comparison between different sets of carded needle-punched nonwoven has been used to study the influence of manufacturing parameters such as fibers' directions, the area and the needle punching densities. We have found that the anisotropy observed between both directions can be reduced depending on these parameters. Furthermore, this work investigates the possibility to form double curvature parts such as a hemisphere as well as a more complex shape such as a square box which possesses four triple curvature points. We propose a forming process adapted to the features of the nonwoven structure. The purpose is to determine their behavior under high stress during various forming settings. The preforming tests allowed us to observe in real time the manufacturing defects as well as the high deformability potential of flax nonwoven.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.225-228
• /
• 1989

Under the different conditions of planting density, maturation dates, stem length, oil contents, stem yield and seed yield of flax were investigated in 1984. The results were as followed: Wiera and Storment Goss were earlier in the maturation dates with increasing plant density, However Taijungsung #1 was delayed. Though there is a difference between the varieties stem length was getting longer with increasing plant density., Oil contents were getting higher with increasing plant density, stem yield and seed yield were increased with increasing plant density, on the contrary those were decreased by the growth of ciliary flax in the case of 1200 plants per 1.2m$^2$. Therefore optimum planting density of flax culture was 12cm x 6cm.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.2
• /
• pp.124-130
• /
• 2016

In this study, agronomic characteristics and fatty acid composition of 121 flax (Linum usitatissimum L.) germplasms were analyzed. The flax germplasms had a fairly short growth period of 75-95 days. The plant height at maturity varied from 52 to 124 cm. The flower color varied from white to lilac and even purple. Early flowering flax germplasms had white flowers and were resistant to lodging. In early flowering flax germplasms, all agronomic characteristics, including growth period, plant height, branch number per plant, stem diameter, number of capsules per raceme, seed number per capsule, 1000-seed weight, and seed yield, were decreased. The average fatty acid composition of 121 flax germplasms comprised palmitic acid (5.3%), stearic acid (4.3%), oleic acid (29.7%), linoleic acid (13.1%) and linolenic acid (46.4%). The total content of unsaturated fatty acids ranged from 84~94% with an average of 88%. Among the fatty acids, linolenic acid (omega-3) content was the highest with a range of 36~54%. In five selected flax germplasms (Hollandia 1803, Red son, C & F Res Br 1767, Wiera, and Ireland 1657) with high linolenic acid (${\geq}51%$), total lipid and protein contents were 30~36% and 5.4~6.9%, respectively. Overall, flax can practically be adoptable into cropping systems in South Korea and utilized as a scenery crop, since flax has a short cultivation period with diverse flower colors.

• The Korean Journal of Community Living Science
• /
• v.27 no.4
• /
• pp.795-801
• /
• 2016

This study was conducted to suggest the best union fabric to combine with cellulose fiber for summer and in-between seasons. Four types of union fabric, viz. silk/flax, silk/cotton, rayon/flax and rayon/cotton, were used as sample fabrics after weaving them in a local textile factory. The air permeability, moisture regain, water absorption, water vapor permeability and thermal insulation of the samples were tested. The results are as follows. The rayon/flax union fabric is the most suitable for summer clothes due to its having the best comfort property of air and water vapor permeability, and moisture and water absorption. For in-between seasons, it is recommended to use the silk/cotton union fabric because of its good thermal insulation properties.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.283-289
• /
• 1992

In this paper, dyeing properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same liquor-goods ratio, in case of green dyes, colorfastness to light was similar for three fibers but in case of red dyes, cotton had a lower level. For colorfastness to laundering, there fibers were similar and three were no consistent differences. The degree of stain about white cotton fabric was higher in case of red dyes and it showed the difference of dye's properties. The degree of stain about white wool fabric showed the highs resistance or stain and little stain was seen. This result represented that the dyes. used were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was consistently brighter and the shade of ramie was darker than that of cotton and flax. This might mean that optical effects arose from the comparatively large cross-sectional size of the ramie fiber and its highly oriented structure.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.174-182
• /
• 2000

We prepared natural indigo/calcium hydroxide complex powder from tinctoria's leaf, according to the demand of developing new dyeing technique of natural fibre with natural indigo. FT- IR and UV/Visible spectra were operated to find the dyeing properties of synthetic indigo and natural indigo powder. Cotton, flax and silk fabrics were dyed with different pH, dye concentration and dyeing time. The colour yield of indigo dye was quite sensitive to dye bath pH and fabric. In synthetic indigo, the highest K/S value of dyed silk fabric was shown at near pH 9.0, and which of flax and cotton fabric were shown at pH 11.0. In other hand, in the case of natural indigo complex powder, the highest K/S value of dyed silk fabric was shown at near pH 8.0, and which of flax and cotton fabric were shown at pH 9.5∼pH 10. Mercerized cotton fabric dyed with natural indigo powder has a little antimicrobial activity.

• International Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.17-20
• /
• 2016

In this work, a structural design on horizontal axis wind turbine blade using natural flax fiber composite is performed. The structural design results of flax/epoxy composite blade are compared with the design results of glass/epoxy composite blade. In order to evaluate the structural design of the composite blade, the structural analysis was performed by the finite element method. Through the structural analyses, it is confirmed that the designed blade using natural composite is acceptable for structural safety, blade tip deflection, structural stability, resonance possibility, and weight. Finally, structural test of manufactured blade was performed. Through the structural test, it is confirmed that the designed blade is acceptable.

• Korean Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.75-80
• /
• 1998

In this paper, deying properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same dyeing bath ratio, in case of green dyes, colorfastness to light was similar for three fabrics but in case of red dyes, cotton had a lower level. For colorfastness to laundering, three fabrics were similar and there were no consistent differences. The degree of stain about white fabric cotton was highest in case of red dyes. The degree of stain about white fabric wool showed the high resistance of stain and little stain was seen. This result represented that the used dyes were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was cosistently brighter and the shade of ramie was darker than of cotton and flax. This might mean that optical effects arouse from the comparatively large cross-sectional size of the ramie fiber and its highly ordered structure.

• Korean Journal of Plant Resources
• /
• v.24 no.6
• /
• pp.696-701
• /
• 2011

The aim of this field experiment was to investigate the possible effects of mepiquat chloride (TE) and trinexapac-ethyl (MC) on oil composition, seed yield and endogenous gibberellins content of flax cultivar. Foliar application of plant growth retardants mepiquat chloride (0.897, 1.794 and 2.691 kg a.i. $ha^{-1}$) and trinexapac-ethyl (0.756, 1.512 and 2.668 kg a.i. $ha^{-1}$) had significantly increased seeds ripening rate and seed yield. In contrast, plant height was decreased by foliar application of MC and TE. The application of MC significantly increased seed oil yield (730 kg $ha^{-1}$ by 27.0%) compared to the control. Seed and oil yield, and unsaturated fatty acids (oleic acid, linoleic acid and linolenic acid) were increased by foliar application of MC.