• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권5호
• /
• pp.474-481
• /
• 2006

The endoscopic assisted approach for the treatment of condylar fracture is a less invasive alternative treatment modality and is considered to be able to overcome the limited access to the operation field to obtain an accurate reduction and fixation. Six patients with condylar neck and subcondylar fracture underwent the endoscopic assisted open reduction and internal fixation through the transoral approach at the Department of Oral and Maxillofacial Surgery, Seoul National University Dental Hospital. The endoscope was inserted through an intraoral incision and the reduction of fracture fragment was performed via a transbuccal approach with two transcutaneous stab incisions. Five patients showed anatomic reduction without any complications. One patient, whose fracture site was fixed with a single plate, showed displacement of fractured condylar segment during the follow up period. No patient had any facial nerve damage.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.687-694
• /
• 2005

건설 재료와 기술의 발달로 건축물이 장스팬화 ·경량화 되어 가고 있다. 이로 인해 건축물 바닥의 고유진동수(Frequency)와 감쇠비(damping ratio)가 감소함에 따라 거주자들의 바닥판의 수직진동에 대한 문제가 발생하고 있다 그러나 현행 사용성 기준은 바닥판의 최대 정적 처짐에 의해 결정하고 있다. 하지만 선행연구(Han et al., 2003)에서 현행 기준을 만족하는 바닥이 수직진동에 대한 사용성 기준을 만족하지 못하는 것을 볼 수 있다. 따라서 본 연구에서는 거주자들의 뒤꿈치 충격하중에 대한 수직진동 사용성 기준을 만족하는 바닥 두께를 제안하고자 하였다. 슬래브 재료의 특성과 뒤꿈치 충격하중 및 마감 고정하중의 불확실성을 고려하기 위해 Monte Carlo Simulation을 사용하여 확률적으로 접근하였다. 그 결과 4변 단순지지의 경우 두께가 스팬 길이의 $1/14\~1/17$에서, 4변 고정지지의 경우 스팬 길이의 $1/18\~1/25$인 경우에 초과 확률이$0\%$에 도달하였다.

• The Journal of Korean Physical Therapy
• /
• 제25권5호
• /
• pp.232-238
• /
• 2013

Purpose: The aim of this study was to evaluate the effect of lumbar stabilization exercise on an unstable surface on trunk posture and static standing balance ability in patients with scoliosis. Methods: Subjects included 18 patients who showed symptom of scoliosis. Patients were divided into two experimental groups, one using an unstable surface and one using a fixed surface, and the patients were required to perform a lumbar stabilization exercise a total of 12 times for 60 minutes per session, three times per week for a period of four weeks, with a six-months follow-up period. Results: A significant reduction was observed in the group that performed the lumbar stabilization exercise on an unstable surface (p<0.05). A significant decrease in both the condition of closed eyes or open eyes in the left and right directions was observed in the group that performed the lumbar stabilization exercise on an unstable surface (p<0.05). After six months, results of comparison of the length of both sides of the trunk showed a significantl decrease in the group performing lumbar stabilization exercises on an unstable surface. Conclusion: Lumbar stabilization exercise on an unstable surface improved the trunk posture of patients with scoliosis symmetrically, and static balance ability in a standing posture showed improvement. In the future, lumbar stabilization exercise on an unstable surface may be used as an exercise for posture correction and balance increase for patients with scoliosis.

• 한국정밀공학회지
• /
• 제3권3호
• /
• pp.30-39
• /
• 1986

The burr worsens the accuracy of a workpiece and decreases a lot of pro- ductivity because it takes so much time and efforts to remove it. In this paper, the height, thickness and size of a drilling burr were derived from the drilling variables of drill diameter, chisel edge angle, web rate =($\Frac{2{\times}\;web\;thickness}{drill\;dia}$) and yielding stress of the workpiece as wel as feed, point angle and helix angle. The theoretical and experimental values of drilling thrust, torque and burr size of the testpiece were analyzed with the method of numerical analysis in a standard drilling condition. The order of choosing the drilling variables for the purpose of controlling the burr size was dealt in this paper with burr forming ratio. The results are as follows: (1) The drill diameter forms 42 percents feed 25 percents point angle 23 percents and web rate, chisel edge angle and gelix angle 5 percents of the partial differential slope of drilling thrust within the usual available ranges of drilling variables. (2) The drill diameter forms 55 percents feed 26 percents web rate 9 percents and chisel edge angle, point angle and helix angle 10 percents of the par- tial differential slope of drilling torque in the usual available ranges of drilling variables. (3) About 70 percents of the burr size can be controlled by feed, 29 percents by web rate in the case of a fixed diameter. It is recommended drilling10 variables to be chosen in the order of feed, web rate, drill diameter, point angle, chisel edge angle and helix angle so as to control the burr size effectively.

• 대한물리의학회지
• /
• 제7권1호
• /
• pp.59-67
• /
• 2012

Purpose : This study was somatosensory less in patients with idiopathic scoliosis somatosensory input to the lumbar stabilization exercises carried out to determine the most effective treatment method to be stable and unstable in terms of supporting the lumbar stabilization exercises the patient's torso length and postural sway by comparing the distance from a standing position and looked for differences in effect on the balance. Methods : The subjects of the study were 18 patients who showed the symptom of scoliosis. The study classified the patients into two experimental groups, one using an unstable surface and one a fixed surface, and the patients were required to do a lumbar stabilization exercise a total of 12 times for 60 minutes per session, three times a week for four weeks. The study carried out a paired comparison t-test so as to compare differences between measurement values in each experimental group before and after the exercise. Results : Superior iliac spine on the left, there was a significant reduction in the group doing the lumbar stabilization exercise on an unstable surface (p<0.05). Regarding change in sway distance to the left and right directions in the group doing the lumbar stabilization exercise on the unstable surface, there was a significant decrease in both the condition of closed eyes or open eyes (p<0.05). As for change in sway distance in forward-and-backward direction, there was a significant reduction in the condition of either closed eyes or open eyes (p<0.05). Conclusion : The lumbar stabilization exercise on an unstable surface improved the trunk posture of patients with scoliosis symmetrically, and the static balance ability in a standing posture was discovered to be improved. In the future, the lumbar stabilization exercise on an unstable surface may be used as a posture correction and balance increase exercise for patients with scoliosis.

• Tribology and Lubricants
• /
• 제24권4호
• /
• pp.190-195
• /
• 2008

Many researchers have tried to improve the tribological characteristics of lubricant by adding various nano particles in the base lubricant. But the reliability evaluation of the lubricants are rarely performed in its real operation condition. In this study, the physical property and the tribological characteristics of the graphite nano lubricant were evaluated and compared with raw lubricant after thermal degrading. In order to evaluate the tirbological characteristics, the disk-on-disk tribotester was adopted to measure the friction coefficient of the graphite nano lubricants. Also the temperature variations of friction surfaces were measured by the thermocouple installed on the fixed plate in the test chamber of the tribotester. The kinematic viscosity was measured using a capillary viscometer on the temperatures of 40, 60 and $80^{\circ}C$. The results showed that the graphite nano lubricant had lower friction coefficient and less wear on the friction surfaces than raw lubricant. After thermally degrading, the friction coefficients of graphite nano lubricant increased, but the friction coefficients after thermal degradation were still maintained lower than those of raw lubricant.

• 한국해안해양공학회지
• /
• 제18권3호
• /
• pp.225-240
• /
• 2006

판에 작용하는 등분포하중과 등변분포하중에 의한 휨 모멘트를 계산하기 위해 무차원 방정식에 대한 유한 차분법으로 제시하고 변장비와 격자수에 따른 수치해의 수렴을 분석하였다. 유한 차분법의 수치해는 격자점을 최대 11,520개까지 사용하여 해를 구하였고 변장비에 따른 최적 격자수를 제시하였다. 본 수치해는 Levy형 해석 해와 달리 자유단의 모멘트 경계조건을 만족하며 자유단과 고정단의 교점부근에서는 특이한 모멘트 분포를 보인다. 등분포하중과 등변분포하중에 의한 Levy형 해석해의 무차원 휨 모멘트 값과 본 결과를 비교하였으며 특이한 분포를 보이는 자유단과 그 부근을 제외하면 두 값은 동일한 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제49권1호
• /
• pp.95-110
• /
• 2014

The study deals with physical modeling of space frame-pile foundation and soil system using finite element models. The superstructure frame is analyzed using complete three-dimensional finite element method where the component of the frame such as slab, beam and columns are descretized using 20 node isoparametric continuum elements. Initially, the frame is analyzed assuming the fixed column bases. Later the pile foundation is worked out separately wherein the simplified models of finite elements such as beam and plate element are used for pile and pile cap, respectively. The non-linear behaviour of soil mass is incorporated by idealizing the soil as non-linear springs using p-y curve along the lines similar to that by Georgiadis et al. (1992). For analysis of pile foundation, the non-linearity of soil via p-y curve approach is incorporated using the incremental approach. The interaction analysis is conducted for the parametric study. The non-linearity of soil is further incorporated using iterative approach, i.e., secant modulus approach, in the interaction analysis. The effect the various parameters of the pile foundation such as spacing in a group and configuration of the pile group is evaluated on the response of superstructure owing to non-linearity of the soil. The response included the displacement at the top of the frame and bending moment in columns. The non-linearity of soil increases the top displacement in the range of 7.8%-16.7%. However, its effect is found very marginal on the absolute maximum moment in columns. The hogging moment decreases by 0.005% while sagging moment increases by 0.02%.

• Journal of Korean Neurosurgical Society
• /
• 제40권5호
• /
• pp.351-356
• /
• 2006

Objective : Spondylodiscitis has been diagnosed by clinical, radiological and laboratory methods. MR imaging is well known as an excellent diagnostic tool for spondylodiscitis. However, the changes in MR images throughout the treatment process has not been studied. Thus we have analyzed the serial changes of MR images throughout the stages of infection. Methods : Ten patients were selected for retrospective reviewed who had been treated at our institute for infectious spondylodiscitis between 2000 and 2005. These patients had been followed-up at least six months and had taken more than a couple of series of MR scans. We classified the MR images into four groups according to the stages of treatment for the infection and compared them to the clinical and laboratory findings. Results : MR image signals changed minimally or appeared to be normal in the early stages. The progression of spondylodiscitis was characterized by a low T1 WI signal and a high T2 WI signal in disc and vertebral body. The signal changes of the MR images were then propagated and the end plate was destructed. During the treatment, the destructed endplate became stabilized and the signal intensity of both T1 and T2 WI were fixed to low-or iso-intensity. Conclusion : We can determine the serial signal changes based on MR images according to the treatment of spondylodiscitis. We can therefore determine the status of the infection and the stage of treatment, as well as the diagnosis of spondylodiscitis using serial MR images.

• 한국수산과학회지
• /
• 제3권4호
• /
• pp.207-212
• /
• 1970

멸치절임의 숙성 및 저장 중의 효소 활성 VBN, 세균수, 식염 함유량, 산도, amino-N pH 그리고 지방의 산가에 다음과 같은 결과를 얻었다. 1) Protease 활성은 염수 염장 중에는 증가하고 절임 중에는 식초산의 영향으로 감소하고 이후 차차 거의 일정하게 변화하며 이에 따라 amino-N는 대개 증가하여 숙성한다. 2) Lipase 활성은 염수 염장 중에는 감소하며 vinegar의 첨가로 일단 증가하였다가 절임중에는 증감의 일정한 경향을 볼 수 없다. 그리고산도는 대개 증가하고 있다. 3) VBN와 NaCl 농도는 염수 염장 중에는 급격히 증가하고 절임중에서는 VBN는 완만한 증가를 하며 NaCl 농도는 기의 변화가 없었다. 4) 세균수는 염수 염장함으로써 줄었다가 다시 증가하며 절임함으로써 급격한 감소를 보이고 그 이후에는 일정한 수를 유지 하였다. 5) 절임 제품의 저장성을 유지하기 위해서는 육질의 산도가 $2\%$ 이상이 되도록 vinegar의 산도를 높혀 주어야한다. 6) 염수 염장하는 기간은 8일이 적합하였으며 VBN, 산도, amino-N, lipase 활성 및 관능 검사 성적을 보아서 절임한 후 47일까지 보장할 수 있고 32일 때가 가장 맛이 좋았다.