• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.272-273
• /
• 2014

Existing the free-form concrete segments (FCS) mold is produced by state of solid such as steel, wood, Styrofoam that can not be recycled. Using FCS mold result in delay on schedule and decrease of productivity because it consists of irregular curved variety and it requires more time than fixed mold. Thus, FCS mold should be developed which can reduce the costs and also it can be used as semipermanent. The aim of this study is to suggest of flexible mold production process for using the phase change materials(PCM). PCM is maintain that its solid state at low temperature but it changes phase to liquid state by heating. PCM is suitable material for flexible mold due to change of phase in relatively high temperature compare to other phase change materials such as water. Flexible mold is possible that reuse semi-permanently made by PCM. Thus, this study is proposed the process of flexible mold production for using the PCM. The study results will be used as the basic theory for studies on production and installation of FCS.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.329-336
• /
• 1990

In this investigation, bar-shaped specimens which consisted of three layers are prepared to study the effects of residual compressive stress on the mechanical properties in ZTA. The outer layers contained Al2O3 and unstabilized ZrO2 and the central layer contained Al2O3 and stabilized ZrO2(with 5.10wt% Y2O3). When cooled from the sintering temperature, some of zirconia in the outer layers transformed to the monoclinic form while zirconia in the central layer was retained in the tetragonal form. The transformation which induces to dilatational expansion led to the estabilishmenet of compressive stress in the outer layers and balances tensile stress in the central layer. Decrease of outer layer thickness(for a fixed total thickness)increases residual compressive stress. Because of residual compressive stress in the outer layers, the fracture toughness of outer layers of 3-layers composite is 10.21 Mpam1/2, which is increased to 25% above in comparison with 1-layer specimens in ZTA. Also, the 3-layers composite is believed to exhibite greater fracture resistance in contact damage environment from thermal shock test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12A
• /
• pp.1136-1146
• /
• 2005

In this paper, the radiative electric field intensity due to the communication signal and conductive noise is calculated in overhead medium voltage power lines for power line communication. The input impedance is calculated by means of 2 port equivalent model of medium voltage power line network and basic transmission line theory. And then, currents is calculated by calculated input impedance and finally, the emissive electric field is calculated. The input impedance appears like a standing wave form with a fixed cycle because high reflection at the input terminal due to the characteristic impedance of medium voltage power line is very large. A calculated current and radiative electric field also appears like this form. From the measurement results, the measured results are very similar to the calculated results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.6-11
• /
• 2014

Repetitive control is a specialized control scheme to track and/or attenuate a periodic reference trajectory and/or disturbance. Most researches about repetitive control have been performed in the frequency domain. Recently, several approaches to deal with repetitive control systems in the state space are developed by representing a q filter as a state-space equation. This paper presents a design method of a repetitive control system in the state space to satisfy $H_{\infty}$ performance. The overall system is composed of a plant, a repetitive controller, and a state-feedback controller, which can be converted to a standard form used in $H_{\infty}$ control. A LMI (Linear Matrix Inequality)-based stability condition is derived for fixed state-feedback gains. Under a given q filter, another LMI condition is derived to improve $H_{\infty}$ performance and is employed to find state-feedback gains by solving an optimization problem. Finally, to verify the feasibility of the proposed method, a numerical example is demonstrated.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1806-1809
• /
• 2008

Study that form micro pattern by direct ink jet printing method is getting attention recently. Direct ink jet printing spout fine droplet including nano metal particle by force or air pressure. There is reason which ink jet printing method is profitable especially in a various micro-patterning technology. It can embody patterns directly without complex process such as mask manufacture or screen-printing for existent lithography. In this study, research of a technology that ejects fine droplet form of Pico liter and forms metal micro pattern was carried with inkjet head of piezoelectricity drive system. Droplet established pattern while ejecting consecutively and move on the surface at the fixed speed. Patterns formed in ink are mixed with organic solvent and polymer that act as binder. So added thermal hardening process after evaporate organic solvent at isothermal after printing. I executed high frequency special quality estimation of CPW transmission line to confirm electrical property of manufactured circuit board. We tried a large area printing to confirm application possibility of an ink jet technology.

• Restorative Dentistry and Endodontics
• /
• v.11 no.1
• /
• pp.89-95
• /
• 1985

The intact dental pulps which were free of their tooth bud from adult rat incisors, and oral mucosa were transplanted subcutaneously in homologous rats to study the formation of calcified tissue. The rat were sacrificed after 1,2,3 and 4 weeks following transplantation of dental pulp and oral mucosa. The samples which contained the transplanted and surrounding tissue were fixed in 10% NBF, stained with hematoxylin and eosin, alizarin red S, von Kossa, and alcian blue. Microscopic examinstins revealed as follows: 1. The transplanted oral mucosas were not calcified but tended to form the epithelial cysts. 2. At 1 week after transplantation of dental pulp the calcified structures were appeared at the periphery of the transplantation of dental pulp but weakly reacted to alizarin red S, von Kossa, and alcian blue. 3. At 2 weeks after transplantation of dental pulp the calcified structures began to expand from the periphery to the center of the transplanted dental pulp and occupied the large areas comparatively, and strongly reacted to alizarin red S, and von Kossa stains. 4. At 3 weeks after transplantation of pulp tissue the fibrous components were grown at the periphery of the transplanted pulp tissuesand at 4 weeks a large amount of fibrous tissues were observed. The transplanted pulp tissue tended to form foreign bodies gradually.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.200-212
• /
• 2009

Since the late of 20C, contemporary fashion have becoming enlargement between role and function of fashion through the combination and the deconstruction among various different spheres. Because multi-functional and trans-formal fashion transforms and extends original space and role toward any other fields through the morphologic and structural combination, this has been freed form the representational function pursuing more simple morphologic imitation, and becomes to change the space that is able to 'becoming' of Jill Deleuze. This paper intends to make a comparative study between the representation phenomenon about simple morphologic imitation of existing fashion design, and the becoming phenomenon of fashion focused on the change toward any other different object. This studies' conclusion as follows. 1) First representation imitates a lot of nature forms that are able to be restored any fixed form and picture. 2) Second representation is the representation of representation that re-imitates imitated object and art work. 3) Ontalogical becoming is classified with depaysement, self-presentation of fashion, morphing, and becoming the nature as a element.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.810-814
• /
• 1996

The purpose of this exclusive welding-machine process using the welding Torch-rotation form is to develop a mechanism which can solve the problem of twisted welding wires and cables. The technique was developed by revising the torch position and smooth controlling of both the formal and reverse rotation. Some of the advantages of using the Torch-rotation form over the Work-rotation technique are the practical uses of increased work space and link work with the automation system of the plant. Using this welding machine process, It is possible to design a specific tool in order to solve the implemental problem. And I produced a control plate which can manipulate the progress of the entire process at the work place. Even if another kind of axle casing's welding work is used this process can be utilized if the fixed tip and work is produced and changed. The development if this exclusive welding-machine could reduce the manpower of skilled welding labor and after considerable analysis, this machine was found to increase productivity and better quality product in comparison to the handmade product.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.2992-3009
• /
• 2016

The performance of D-MIMO systems is not only affected by multipath fading but also from shadowing fading, as well as path loss. In this paper, we investigate the ergodic capacity of D-MIMO systems operating in non-correlated K fading (Rayleigh/Gamma) channels. With the aid of majorization and Minkowski theory, we derive analytical closed-form expressions of the upper and lower bounds on the ergodic capacity for D-MIMO systems over non-correlated K fading channels, which are quite general and applicable for arbitrary signal-to-noise ratio (SNR) and the number of transceiver antennas. To intuitively reveal the impacts of system and fading parameters on the ergodic capacity, we deduce asymptotic approximations in the high and low SNR regimes. Finally, we pursue the massive MIMO systems analysis for the lower bound and derive closed-form expressions when the number of antennas at BS grows large, and when the number of antennas at transceivers becomes large with a fixed and finite ratio. It is demonstrated that the proposed expressions on the ergodic capacity accurately match with the theoretical analysis.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.1
• /
• pp.33-37
• /
• 2000

One of the methods to increase the solubility of a drug is to use complexation with a cyclodextrin. Due to the hydrophobic nature of the interior cavity of the cyclodextrin, it has been known that undissociated lipophilic drugs can be included within the cyclodextrin by hydrophobic interaction. Recently, inclusion of hydrophilic or dissociated form of a drug has been investigated. In this study, the synergism of pH and complexation with $hydroxypropy-{\beta}-cyclodextrin\;(HP\;{\beta}\;CD)$ to increase the solubility of two oxicam derivatives was investigated. In addition, the effect of partition coefficient of dissociated and undissociated form of the drug on the extent of complexation with HP ${\beta}$ CD was studied. The solubility was measured by equilibrium solubility method. The solubility of tenoxicam and piroxicam increased exponentially with an increase in solution pH above the pKa of the drug in the presence and absence of HP ${\beta}$ CD. The solubility of the drugs increased linearly as a function of HP ${\beta}CD$ concentration at fixed pH. Although the stability constant of ionized species is less than that of the unionized species, the concentration of the ionized drug complex is greater than that of the unionized drug complex due to higher concentration of ionized species at pH 7.3.