• 한국항해학회지
• /
• 제12권2호
• /
• pp.23-32
• /
• 1988

This paper offers a method of magnetic compass adjustment for the vessel alongside the wharf using newly designed magnetic north former, which makes the same magnetic field-change as the turning vessel does. The characteristics of the magnetic north former was examined by observing the deviation curves of the magnetic compass installed on the compass deviascop at laboratory. The magnetic north former consists of A and B arms which hold the permanent bar magnets at the both ends of each arm. The arm is to rotae in the horizontal plane about the vertical axis fixed at the center boss of the magnetic compass and it is to compensate the horizontal plane about the vertical axis fixed at the center boss of the magnetic compass and it is to compensate the horizontal component of the earth's field. The B arm makes the artificial magnetic north around the magnetic compass for every ship's heading. The results of investigation are summarized as follows ; 1. The observation and correction of magnetic compass deviation can be done without swinging the ship, of the effect of D coefficient is negligible. 2. The residual deviation curve of the magnetic compass depends on the accuracy of deduced value of ship's multplier($\lambda$). 3. The errors due to the inaccuracy of deduced value of ship's multiplier change in the same way as the B and C coefficient do.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.297-302
• /
• 1999

Finite element analysis is peformed about the crack propagation in half-space due to sliding contact. The analysis is based on linear elastic fracture mechanics and stress intensity factor concept. The crack location is fixed and the friction coefficient between asperity and half-space is varied to analyze the effect of surface friction on stress Intensity factor for horizontal crack. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factor.

• 대한수학회지
• /
• 제36권2호
• /
• pp.355-367
• /
• 1999

We prove the existence of 2N-1 distinct ordered positive solutions of a class of semilinear elliptic Dirichlet boundary value problems on Rn when the forcing term has N distinct positive stable zeros and the coefficient function decaying to the zero at infinity.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.833-846
• /
• 1988

본 연구에서는 후래시현상과 가열이 동시에 존재하면서 증발을 일으키는 수직 증발관내에서의 유동양식에 대해서, 우선 전기 프로우브를 이용하여 관내의 유동양식 에 따른 전기적 신호를 얻고, 시진실험 방법(photographic experimental method)을 통 하여 이를 확인한다. 또한, 전기 프로우브를 통하여 얻은 신호는 적절한 해석과정을 통해 수직 증발관내의 유동에 따른 기공률을 측정하는데 적용된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.479-481
• /
• 1999

In this paper, We design low-order controller to achieve maximized controller stability margin and controller' Performance. FOPA(Fixed Order Pole Assignment) method is one of the approach to design controller in the parametric uncertain system. But the method to define a Target Polynomial is not explicit1y Known. In this paper, our goal is to find a controller Coefficient, such that performance and $l_2$ stability margin are maximized in the parametric uncertain system. Using Lipatove theorem and CDM(Coefficient Diagram Method), we set target polynomial constraints and design a controller which maximizes $l_2$ stability margin. we show effectiveness of the proposed controller design method by comparing $l_2$ stability many of the desired controller with that of the conventional robust controller.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.85-93
• /
• 2002

본 연구에서는 Cour(1971)가 제안한 변곡점법(Inflection Point Method)을 이용하여 압밀계수를 예측하기 위한 새로운 방법을 소개하였다. 여기서, 변곡점은 압밀도(U)와 시간계수(log T) 관계곡선의 변곡점 중에서 압밀도($U_i$)가 70.03% 일 때의 시간계수 $T_i$=0.405에 상응하는 점이다. 제안된 변곡점법에 의한 신속한 압밀시험 방법에서 각 단계별 하중재하는 변곡점을 확인한 직후에 이루어지므로 압밀시험에 소요되는 시간을 단축시킬 수 있으며, 압밀계수를 빠른 시간 내에 쉽게 구할 수 있다. 이 신속한 압밀시험법에 소요되는 시간은 기존의 압밀시험의 경우 1주 또는, 2주의 기간이 소요되는데 비하여 0.5시간~9시간이 소요되므로 압밀시험을 보다 신속히 완료할 수 있다. 본 연구에서는 보다 정규화된 결과를 얻고자 침강장치를 고안하였으며, 그 결과의 분석에서 비 교란시료의 압밀정수들과 잘 부합하는 것으로 나타났다.

• 대한전자공학회논문지SP
• /
• 제46권3호
• /
• pp.89-95
• /
• 2009

H.264/AVC는 높은 압축 성능을 보이는 현존하는 가장 우수한 비디호 부호화 표준이다. H.264/AVC는 양자화된 변환 계수를 부호화하기 위해 지그재그 탐색 방법을 채택하고 있다. 하지만 이 방법은 모든 블록의 양자화된 변환 계수를 블록의 특성을 고려하지 않고 동일한 순서로 탐색하기 때문에 효과적이지 못하다. 따라서 본 논문에서는 H.264/AVC의 화면 간 예측에서 압축 효율을 증가시키기 위한 적응적인 계수 탐색 방법을 제안한다. 제안하는 방법에서는, 이전 블록들의 정보를 기반으로 각 화면 간 예측 모드의 계수 탐색 순서를 조절한다. 실험 결과는 제안하는 적응적인 계수 탐색 방법은 고화질의 HD 영상에서 2.29%의 압축 효율 향상을 보여준다.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.286-295
• /
• 2021

This study attempts to find optimal conditions of the friction coefficient using a discrete element method (DEM) simulation with various friction coefficient conditions and three different grinding media with various ball sizes in a traditional ball mill (TBM). Using ball motion of the DEM simulation are obtained using the optimal friction coefficient compared with actual motion; photographs are taken by the digital camera and the snapshot images are analyzed. In the simulation, the rotation speed of the mill, the materials and velocity of the grinding media, and the friction coefficient between the balls and the wall of the pot are fixed as the actual experimental conditions. We observe the velocity according to the friction coefficient from the DEM simulation. The friction coefficient is found to increase with the velocity. Milling experiments using a traditional ball mill with the same experimental conditions as those of the DEM simulation are conducted to verify the simulated results. In addition, particle morphology change of copper powder is investigated and analyzed using scanning electron microscopy (SEM) for the milling experiment.

• Wind and Structures
• /
• 제18권6호
• /
• pp.651-668
• /
• 2014

Wind tunnel tests are conducted to investigate the wind loads on vertical fixed-roof cylindrical tanks with a very low aspect ratio of 0.275, which is a typical ratio for practical tanks with a volume of $100,000m^3$. Both the flat-roof tank and the dome-roof tank are investigated in present study. The first four moments of the measured wind pressure, including the mean and normalized deviation pressure, kurtosis and skewness of the pressure signal, are obtained to study the feature of the wind loads. It is shown that the wind loads are closely related to the behavior of flow around the structure. For either tank, the mean wind pressures on the cylinder are positive on the windward area and negative on the sides and the wake area, and the mean wind pressures on the whole roof are negative. The roof configurations have no considerable influence on the mean pressure distributions of cylindrical wall in general. Highly non-Gaussian feature is found in either tank. Conditional sampling technique, envelope method, and the proper orthogonal decomposition (POD) analysis are employed to investigate the characteristics of wind loads on the cylinder in more detail. It is shown that the patterns of wind pressure obtained from conditional sampling are similar to the mean pressure patterns.An instantaneous pressure coefficient can present a wide range from the maximum value to the minimum value. The quasi-steady assumption is not valid for structures considered in this paper according to the POD analysis.

• 소음진동
• /
• 제7권4호
• /
• pp.613-620
• /
• 1997

Steady and unsteady flows between rotating cylinders are of interest on lubrication, convective heat transfer and flow-induced vibration in large rotating machinery. Steady rotating flow is generated by rotating cylinder with constant velocity while the unsteady rotating flow by oscillating cylinder with homogeneoysly oscillating velocity. An analytical method is developed based on the simple radial coordinate transformation for the steady and unsteady rotating flows in concentric annulus. The governing equations are simplified from Navier-Stokes equatins. Considering the skin friction based on the radial variation of circumferential flow velocity, the torques acting on the fixed and the rotating cylinder are evaluated in terms of added-inertia and added-damping torque coefficients. The coefficients are found to be influenced by the oscillatory Reynolds number and the radius ratio of two cylinders; however, the effect of the oscillatory Reynolds number on the coefficients is minor in case of relatively low radius ratio.