• Korean Journal of Environmental Agriculture
• /
• v.38 no.2
• /
• pp.76-82
• /
• 2019

BACKGROUND: For sustainable agriculture, there are various agricultural practices including low input. Over the last few decades high input of chemical fertilizer and compounds results in environmental pollution and deterioration of soil fertility. Soybean (Glycine max L.) is well known eco-friendly crop due to their symbionts. Soybean has a relationship with nitrogen fixation bacteria called rhizobia. In this research work, we investigated effects of soybean cultivation on soil microorganism activities. METHODS AND RESULTS: Experiments were conducted in pots and potato cultivation was used as reference. Soil chemical properties were analyzed considering soil nutrient over cropping period. For the soil microbial community analysis, dehydrogenase activity analysis (DHA) analyzed along with denaturing gradient gel electrophoresis. The results showed that higher soil organic matter in the soybean cultivation soil than in the potato cultivation soil. Available $P_2O_5$ concentration increased gradually in both pots but showed higher value in the potato cultivation soil. DHA value implying microbial activities showed higher value in the soybean cultivation soil over all cropping period. CONCLUSION: The cause of high microbial activity in the soybean cultivation soil was considered to the effects of some specific microorganisms related to soybean cultivation. Therefore, the availability of soybean cultivation for sustainable agriculture should be encouraged in terms of microorganism community activity in soil.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.1
• /
• pp.96-105
• /
• 2019

Objective : The aims in the management of thoracolumbar spinal fractures are not only to restore vertebral column stability, but also to obtain acceptable alignment of the thoracolumbar junction (T-L junction) to prevent complications. However, insufficient surgical correction of the thoracolumbar spine would be likely to cause late progression of abnormal kyphosis. Therefore, we identified the surgical factors that affected unfavorable radiologic outcomes of the thoracolumbar spine after surgery. Methods : This study was conducted in a single institution from January 2007 to December 2013. A total of 98 patients with unstable thoracolumbar spine fracture were included. In these patients, fixation was done through transpedicular screws with rods by three surgical patterns. We reviewed digital radiographs and analyzed the images preoperatively and postoperatively during follow-up visits to compare the change of the thoracolumbar Cobb angle with radiologic parameters and clinical outcomes. The unfavorable radiologic group was defined as the patients who were measured as having greater than 20 degrees of thoracolumbar Cobb angle on the last follow-up, or who underwent kyphotic progression of thoracolumbar Cobb angle greater than 10 degrees from the immediate postoperative state to final follow-up, or who had overt instrument failure with/without additional surgery. We assessed the risk factors that affected the unfavorable radiologic outcomes. Results : We had 43 patients with unfavorable radiologic outcomes, including 35 abnormal thoracolumbar alignments and 14 instrumental failures with/without additional surgery. The multivariate logistic regression test showed that immediate postoperative T-L junction Cobb angle less than 10.5 degrees was a statistically significant risk factor, as well as the presence of osteoporosis (p=0.017 and 0.049, respectively). Conclusion : Insufficient correction of thoracolumbar kyphosis was considered to be a major factor of an unfavorable radiological outcome. The spinal surgeon should consider that having a T-L junction Cobb angle larger than 10.5 degrees immediately after surgery could result in an unfavorable radiological outcome, which is related to a poor clinical outcome.

• Archives of Craniofacial Surgery
• /
• v.20 no.2
• /
• pp.101-108
• /
• 2019

Background: To date, a variety of surgical approaches have been used to reconstruct the medial orbital wall fracture. Still however, there is still a controversy as to their applicability because of postoperative scars, injury of anatomical structures and limited visual fields. The purpose of this study was to introduce a useful additional medial subbrow approach for better reduction and securement more accurate implant pocket of medial orbital wall fracture with the subciliary technique. Methods: We had performed our technique for a total of 14 patients with medial orbital wall fracture at our medical institution between January 2016 and July 2017. All fractures were operated through subciliary technique combined with the additional medial subbrow approach. They underwent subciliary approach accompanied by medial wall dissection using a Louisville elevator through the slit incision of the medial subbrow procedure. This facilitated visualization of the medial wall fracture site and helped to ensure a more accurate pocket for implant insertion. Results: Postoperative outcomes showed sufficient coverage without displacement. Twelve cases of preoperative diplopia improved to two cases of postoperative diplopia. More than 2 mm enophthalmos was 14 cases preoperatively, improving to 0 case postoperatively. Without damage such as major vessels or extraocular muscles, enophthalmos was corrected and there was no restriction of eyeball motion. Conclusion: Our ancillary procedure was useful in dissecting the medial wall, and it was a safe method as to cause no significant complications in our clinical series. Also, there is an only nonvisible postoperative scar. Therefore, it is a recommendable surgical modality for medial orbital wall fracture.

• Journal of Korean Foot and Ankle Society
• /
• v.25 no.3
• /
• pp.111-116
• /
• 2021

Purpose: Variations in the preferred conservative and operative treatment methods for ankle arthritis may be observed in the practice of orthopedic surgeons. This study is based on the Korean Foot and Ankle Society (KFAS) member survey and aims to report the current trend and changes in the management of ankle arthritis over the last few decades. Materials and Methods: A web-based questionnaire containing 24 questions was sent to all KFAS members in July 2021. The questions were mainly related to the preferred techniques and clinical experience in osteotomy, arthrodesis, and total ankle arthroplasty (TAA) for patients with ankle arthritis. Results: Sixty-three out of 550 surgeons (11.5%) responded to the survey. The responses to 6 out of the total of 24 questions (25.0%) achieved the levels needed to reflect a tendency. Answers that showed a tendency were related to the following: a surgical approach for arthrodesis (anterior approach), use of auto-bone graft for arthrodesis (iliac bone), a nonunion rate of more than 10% following arthrodesis, main reason related to unsatisfactory results after arthrodesis (nonunion or delayed union), the main reason to change total ankle prosthesis (unstable supply of prosthesis), the unusualness of revision TAA and conversion of fusion to TAA. Diversity was found in several aspects of treatment (degree of experience and satisfaction in supramalleolar osteotomy, fixation method for arthrodesis, preferred TAA prosthesis and longevity, degree of experinece, annual number of TAA operation. Conclusion: This study proposes updated information with regard to the current trends in the management of ankle arthritis in Korea. Both consensus and variations in the approach to patients with ankle arthritis were identified through this survey. With an increasing preference for TAA, the need for the development of a prosthesis optimized for Koreans and a stable supply of prostheses were the suggestions made by the study.

• Microbiology and Biotechnology Letters
• /
• v.49 no.3
• /
• pp.391-402
• /
• 2021

Earthworms play an important role in soil fertilization, interacting continually with microorganisms. This study aims to demonstrate the existence of beneficial microorganisms living in the earthworm's immune system, the coelomic fluid. To achieve this goal, a molecular identification technique was performed, using cytochrome c oxidase I (COI) barcoding to identify abundant endogenic earthworms inhabiting the temperate zone of Rabat, Morocco. Then, 16S rDNA and ITS sequencing techniques were adopted for bacteria and fungi, respectively. Biochemical analysis, showed the ability of bacteria to produce characteristic enzymes and utilize substrates. Qualitative screening of plant growth-promoting traits, including nitrogen fixation, phosphate and potassium solubilization, and indole acetic acid (IAA) production, was also performed. The result of mitochondrial COI barcoding allowed the identification of the earthworm species Aporrectodea molleri. Phenotypic and genotypic studies of the sixteen isolated bacteria and the two isolated fungi showed that they belong to the Pseudomonas, Aeromonas, Bacillus, Buttiauxella, Enterobacter, Pantoea, and Raoultella, and the Penicillium genera, respectively. Most of the isolated bacteria in the coelomic fluid showed the ability to produce β-glucosidase, β-glucosaminidase, Glutamyl-β-naphthylamidase, and aminopeptidase enzymes, utilizing substrates like aliphatic thiol, sorbitol, and fatty acid ester. Furthermore, three bacteria were able to fix nitrogen, solubilize phosphate and potassium, and produce IAA. This initial study demonstrated that despite the immune property of earthworms' coelomic fluid, it harbors beneficial microorganisms. Thus, the presence of resistant microorganisms in the earthworm's immune system highlights a possible selection process at the coelomic fluid level.

• Journal of Life Science
• /
• v.29 no.11
• /
• pp.1281-1293
• /
• 2019

The rhizosphere is the active zone where plant roots communicate with the soil microbiome, each responding to the other's signals. The soil microbiome within the rhizosphere that is beneficial to plant growth and productivity is known as plant growth-promoting rhizobacteria (PGPR). PGPR take part in many pivotal plant processes, including plant growth, development, immunity, and productivity, by influencing acquisition and utilization of nutrient molecules, regulation of phytohormone biosynthesis, signaling, and response, and resistance to biotic- and abiotic-stresses. PGPR also produce secondary compounds and volatile organic compounds (VOCs) that elicit plant growth. Moreover, plant roots exude attractants that cause PGPR to aggregate in the rhizosphere zone for colonization, improving soil properties and protecting plants against pathogenic factors. The interactions between PGPR and plant roots in rhizosphere are essential and interdependent. Many studies have reported that PGPR function in multiple ways under the same or diverse conditions, directly and indirectly. This review focuses on the roles and strategies of PGPR in enhancing nutrient acquisition by nutrient fixation/solubilization/mineralization, inducing plant growth regulators/phytohormones, and promoting growth and development of root and shoot by affecting cell division, elongation, and differentiation. We also summarize the current knowledge of the effects of PGPR and the soil microbiota on plants.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.576-586
• /
• 2021

The purpose of this study was to evaluate the antifungal activity, plant-growth-promoting activity, and mineral solubilization ability of 10 species of phytopathogenic fungi to select a Bacillus sp. from rhizosphere soils and roots that can be used as a microbial agent. The antifungal activity for phytopathogenic fungi varied based on the Bacillus sp. Among the selected strains, DDP4, DDP16, DDP148, SN56, and SN95 exhibited antifungal activity for nine or more species of phytopathogenic fungi. Regarding nitrogen-fixation ability, all Bacillus sp. showed similar levels of activity, and siderophore production ability was relatively high in ANG42 and DDP427. The indole-3-acetic acid production abilities were in the range of 1.83-67.91 ㎍/ml, with variations in activity based on the Bacillus sp. One strain with a high activity was selected from each species, and their mineral solubilization abilities were examined. Most Bacillus sp. could solubilize phosphoric acid and calcium carbonate, and DDP148 and SN56 could solubilize silicon and zinc, respectively. These results suggested that Bacillus sp. can be considered potential multi-purpose microbial agents for plant growth promotion and disease prevention.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.271-278
• /
• 2021

Azolla is a genus of small aquatic ferns native to Asia, Africa, and America. Azolla is potentially significant as a nitrogen source in agriculture, particularly in conjunction with rice (Oryza sativa L.) cultivation. In addition, Azolla may either control weeds or act as a weed depending on management; therefore, we aimed to determine the effect of Azolla incorporation on weed (e.g., Monochoria vaginalis, Rotala indica, Aeschynomene indica, and Cyperus amuricus) control and its other benefits during rice cultivation. The effects of Azolla on weed emergence were evaluated based on plot area coverage by the Azolla mat, which appears as a green sheet over water, and the rate of weed emergence in paddy field. Weed occurrence was investigated 40 days after Azolla inoculation. Soil samples from the experimental plots were collected following harvest in 2014-2015, and analyzed. Moreover, rice growth, yield, and grain quality were measured. Azolla suppressed weed growth by 72%. Azolla mat incorporation in rice fields suppressed weed growth by over 60%. In addition, Azolla promoted nitrogen fixation. Compared with nitrogen management using chemical fertilizers, Azolla incorporation showed the potential for various positive effects, including the improvement of soil fertility by increasing total nitrogen, and organic matter content. Rice grown with Azolla maintained its yield without additional herbicide treatment. Moreover, the palatability of cooked rice was better when grown with Azolla.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.6
• /
• pp.779-789
• /
• 2022

Objective : To analyze the effects of the number and shape of fenestrations on the mechanical strength of pedicle screws and the effects of bone cement augmentation (BCA) on the pull-out strength (POS) of screws used in conventional BCA. Methods : For the control group, a conventional screw was defined as C1, a screw with cannulated end-holes was defined as C2, a C2 screw with six pinholes was defined as C3, and the control group type was set. Among the experimental screws, T1 was designed using symmetrically placed thru-hole type fenestrations with an elliptical shape, while T2 was designed with half-moon (HM)-shaped asymmetrical fenestrations. T3 and T4 were designed with single HM-shaped fenestrations covering three pitches and five pitches, respectively. T5 and T6 were designed with 0.6-mm and 1-mm wider fenestrations than T3. BCA was performed by injecting 3 mL of commercial bone cement in the screw, and mechanical strength and POS tests were performed according to ASTM F1717 and ASTM F543 standards. Synthetic bone (model #1522-505) made of polyurethane foam was used as a model of osteoporotic bone, and radiographic examinations were performed using computed tomography and fluoroscopy. Results : In the fatigue test, at 75% ultimate load, fractures occurred 7781 and 9189 times; at 50%, they occurred 36122 and 82067 times; and at 25%, no fractures occurred. The mean ultimate load for each screw type was 219.1±52.39 N for T1, 234.74±15.9 N for T2, 220.70±59.23 N for T3, 216.45±32.4 N for T4, 181.55±54.78 N for T5, and 216.47±29.25 N for T6. In comparison with C1, T1, T2, T3, T4, and T6 showed significantly different ultimate load values (p<0.05). However, when the values for C2 and the fenestrated screws were evaluated with an unpaired t test, the ultimate load value of C2 significantly differed only from that of T2 (p=0.025). The ultimate load value of C3 differed significantly from those of T1 and T2 (C3 vs. T1 : p=0.048; C3 vs. T2 : p<0.001). Linear correlation analysis revealed a significant correlation between the fenestration area and the volume of bone cement (Pearson's correlation coefficient r=0.288, p=0.036). The bone cement volume and ultimate load significantly correlated with each other in linear correlation analysis (r=0.403, p=0.003). Conclusion : Fenestration yielded a superior ultimate load in comparison with standard BCA using a conventional screw. In T2 screws with asymmetrical two-way fenestrations showed the maximal increase in ultimate load. The fenestrated screws can be expected to show a stable position for the formation of the cement mass.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.5
• /
• pp.303-308
• /
• 2022

Objectives: Selection of treatment methods for mandibular condylar fractures remains controversial. In this study, we investigated treatment methods for condylar fractures to determine the indications for open or closed reduction. Patients and Methods: Patients >12 years of age treated for mandibular condylar fractures with a follow-up period of ≥3 months were included in this study. The medical records of enrolled patients were reviewed for sex, age, fracture site, treatment method (open or closed reconstruction), postoperative intermaxillary fixation period, operation time, and complications. Radiological analysis of fracture fragment displacement and changes in ramal height difference was performed using computed tomography and panoramic radiography. Results: A total of 198 patients was investigated, 48.0% (n=95) of whom underwent closed reduction and 52.0% (n=103) underwent open reduction. There was no significant correlation between reduction method and patient sex, age, or follow-up period. No statistically significant difference between the incidence of complications and treatment method was observed. None of the patients underwent open reduction of condylar head fracture. Binary logistic regression analysis showed that open reduction was significantly more frequent in patients with subcondylar fracture compared to in those with a fracture in the condylar head area. There was no statistically significant correlation between the groups and fracture fragment displacement. However, there was a significant difference between the treatment groups in amount of change in ramal height difference between the fractured and the non-fractured sides during treatment. Conclusion: No significant clinical differences were found between the open and closed reduction methods in patients with mandibular condylar fractures. According to fracture site, closed reduction was preferred for condyle head fractures. There was no significant relationship between fracture fragment displacement and treatment method.