• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.71-74
• /
• 2005

At the neutral sections, There are neutral sections inserted in overhead contact line between the substations to divide different phase current sections of AC electrified lines. except convention line, a large stress occurs in the contact wire near the fittings under passing pantographs. So, in order to raise the train speed over 150km/h, a new type section has been adopted.

• 환경위생공학
• /
• 제14권1호
• /
• pp.1-10
• /
• 1999

This study was carried out to improve management of wasted home appliances and computers. The generation of wasted home appliances and computers in korea was estimated. Disassembling wasted home appliances and computers according to disassembly procedure, investigate fittings weight and disassembly time. To evaluate hazardous contaminants from televisions and computers, measure heavy metals by leaching test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.127-131
• /
• 2003

We have investigated about kinds of the equipment according to use. They have many kinds of equipments, namely conductive cloths, insulated gloves, conductive shoes, insulated sticks, swivel boom, fittings and insulator cradles etc. We have suggested about use of equipments, basic functions and shapes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.263-265
• /
• 2002

This paper presents a design method of database to manage materials having hierarchical structure on Kyungbu high-speed catenary system. Through this method, the automatic management software was developed. The software can get to find out assemblies as well as single fittings used in a section.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.493-496
• /
• 1987

Theoretical analysis was performed to understand the sensing mechanism of pH-ISFET by using the site binding model. The calculated pH-${\varphi}$ relationship showed good fittings with the experimental results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.294-301
• /
• 2008

At the neutral sections, There are neutral sections inserted in overhead contact line between the substations to divide different phase current sections of AC electrified lines. Except convention line, a large stress occurs in the contact wire near the fittings under passing pantographs. So, in order to raise the train speed over 150km/h, a new type section has been adopted.

• 대한설비공학회지:설비저널
• /
• 제27권5호
• /
• pp.461-470
• /
• 1998

"인류가 물 관리를 이렇게 하다가는 2025년경 심각한 문제가 생긴다."라고 유엔이 98년 3월 22일 "세계 물의 날"을 맞아 이렇게 경고했다. 지구상의 물은 97% 이상이 소금물이고 2.5% 정도만 민물, 민물의 1/3은 지하 대수층에서 얻어진다. 나머지는 빙하와 만년설, 강에서 충당된다. 전 세계는 지하수의 60%를 사용중이며 선진국에서 이 가운데 20~40%를 쓴다. 세계기상기구(WMO)는 "지하수는 자연적으로 채워지는 속도보다 훨씬 빠르게 고갈되고 있다"며 세계 58억 인구의 1/5이 먹을 물이 부족하고 절반 이상이 적절한 위생시설이 없다."고 우려하고 있다.반 이상이 적절한 위생시설이 없다."고 우려하고 있다.고 있다.

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.93-98
• /
• 2015

Recently, Stainless steels have been increasingly selected as the fitting or the valve materials of water pipes as the human health issue is getting higher and higher. Therefore, the connectors attached at pipes to deliver water are exposed to more severe environments than the pipes because crevice or galvanic corrosion is apt to occur at the fittings or the valves. Effects of the solid solution annealing, cooling rate after this heat treatment, and passivation on the corrosion properties of the shell mold casted SSC13 (STS304 alloy equivalent) were studied. The heating and quenching treatment more or less reduced hardness but effectively improved corrosion resistance. It was explained by the reduction of delta ferrite contents. Independent of heat treatment, the chemical passivation treatment also lowered corrosion rate but the improvement of corrosion resistance depended on temperature and time for passivation treatment indicating that the optimum conditions for passivation treatment were the bath temperature of $34^{\circ}C$ and operating time of 10 minutes. Therefore it is suggested that the corrosion resistance of SSC13 can be effectively improved with the heat treatment, where SSC13 is heated for 10 minutes at $1120^{\circ}C$ and quenched and passivation treatment, where SSC13 is passivated for at least 10 seconds at $34^{\circ}C$ nitric acid solution.

• 한국주조공학회지
• /
• 제35권5호
• /
• pp.109-113
• /
• 2015

In this study, the measurement of FN (ferrite volume fraction) and the solution annealing ratio at a temperature of $1130^{\circ}C$ were determined with 15A elbow fittings of shell cast SSC13, and the corrosion resistance with and without austenitizing solution annealing were investigated in comparison with AISI304. The delta ferrite phase was observed in the material due to the slow cooling effect of the shell mold casting. However, the delta ferrite phase decreased gradually with the solution annealing at a temperature of $1130^{\circ}C$. The hardness generally decreased with a heat treatment; however, its corrosion resistance was improved with the heat treatment. In addition, when a passivation treatment was applied, its corrosion ratio showed the lowest value. The pattern of general corrosion decreased due to the decrease in the delta ferrite phase with the solution annealing treatment. Consequently, it is suggested that the corrosion resistance of SSC13 elbow fittings can be improved by increasing the ratio of any solution annealing treatment used and by decreasing the ferrite phase. The relationship between the ratio of solution annealing and delta ferrite is expressed as follows: SA (solution annealing ratio,%) = 98 - FN (ferrite volume fraction, %).

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.697-703
• /
• 2018

In this paper, we analyzed the operation of the ignition circuit for electronic arm and fire device(EAFD), and investigated the sensitive elements of the circuit system. For reliability analysis, the EAFD ignition circuit was modeled using the PSpice simulation tool, and the output results of the circuit were examined by changing the tolerance of each circuit element. Monte Carlo simulation was used by maintaining the values of the observed sensitive elements at ${\pm}10%$ of the original values and adjusting the values of the other components according to a random distribution. The histogram results of the output peak currents and pulse widths were represented by Weibull and Burr type XII function fittings in three cases(element values are +10 %, 0 %, -10 % of original). For the output peak currents, mean values were 1.0028, 1.0034, and 1.0050, where the variance values were calculated as 0.0398, 0.0396, and 0.0290 using the Weibull function fitting, respectively. For pulse widths, the mean values of 0.9475, 0.9907, and 1.0293 with the variance values of 0.0260, 0.0251, and 0.0238 were obtained using the Burr Type XII function fittings.