• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2232-2240
• /
• 2018

We applied methanesulfonic acid (MSA) as a green catalyst to produce levulinic acid (LA) from monomeric sugars. To optimize reaction factors and assess the effect of reciprocal interactions, a statistical experimental design was applied. Optimized result of 40.7% LA yield was obtained under the following conditions: 60 g/L galactose, 0.4 M MSA at $188^{\circ}C$ for 26.7 min. On the other hand, 66.1% LA yield was achieved under 60 g/L fructose and 0.4 M MSA at $188^{\circ}C$ for 36 min conditions. For the effect of combined severity factor on the LA yield from galactose, the LA yield showed a peaked pattern, which was linearly increased until a CSF 3.2 and then diminished with a high CSF. Moreover, it was closely fitted to a non-linear Gaussian peak pattern with a high regression value of 0.989. These results suggest that MSA and galactose, derived from marine red macro-algae, can potentially be applied for the conversion into platform chemicals.

• Journal of the Korean Home Economics Association
• /
• v.49 no.3
• /
• pp.113-121
• /
• 2011

This study developed a method of calculating dynamic wearing ease (DWE) to make patterns for coverall work clothing. The DWE was measured from 3D body scan data of women in their 20's (n = 10). The body postures adopted for measuring the DWE were sitting and deep bending postures. Three types of experimental patterns (A, B, C) were developed. The DWE was applied at the waist and hip lines of the pattern. The location and size of the DWE varied from one pattern to another. For pattern B, DWE of 8.8cm was applied at the back of the waistline. For pattern C, 5.3cm was applied at the waist for the center back line, and 3.5cm was applied at the under hip level. The comfort of the experimental clothing was evaluated in six body postures. The results showed that patterns B and C were comfortable at the crotch, shoulders, and arm pits. Pattern C was comfortable at the hip and crotch areas in the arms lifting-up posture and the stepping-up posture. The appearance and fit of the experimental clothing were evaluated by the panels. Patterns B and C fitted better than pattern A at the abdomen. The results suggest that DWE should be applied at the waist and hip levels for making coverall work clothing patterns.

• Korean Journal of Human Ecology
• /
• v.9 no.4
• /
• pp.471-482
• /
• 2000

The purpose of this study is to produce slacks pattern for pregnant women in the mid or second half period of their pregnancy according to the development figure of the body shell from a follow-up measurement. We here would like to produce slacks pattern for pregnant women constructed to fit better with their individual property in their figure and to help maintain the shape and beauty of the lower half of body and would compare it with two manufactured slacks pattern. The results of the study were as follows; 1. As the pregnancy proceeds, the height of natural-waist line went up spontaneously due to the projection of abdominal region, therefore, it was given darts at the front zipper part so that they could maintain a nice figure and to avoid possibility of feeling oppressed. To acquire a slimmer outfit, we made of the slacks-bottom narrower than the width at the knee line, and it worked out. 2. Sensory evaluation for appearance: According to the statistical of the result of 19items on the questionaire, all items showed significant difference(a$\leq$0.01) between the new and A(bunka) B(Kim's pattern) method slacks pattern, with the new pattern having higher scores. The new drafting method proved to be better fitted, to fit the shape of bodies properly and to get a visual effect to look slim.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.153-171
• /
• 2016

With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.

• The Research Journal of the Costume Culture
• /
• v.21 no.2
• /
• pp.183-194
• /
• 2013

In recent years, intense cold spells caused by climate change have encouraged an increasing number of people to wear a variety of padded jackets. In this context, this paper aims to address the production of padded jackets in casual brands and to develop basic patterns for well-fitted padded jackets targeted toward women in their 20s. The study centered on the production of padded jackets from 13 apparel companies. In addition, three sample jackets were created with 3oz. fill in the body and 2oz. fill in the sleeves, and they were subjected to a wearing test to determine their movement functionality. The research findings were as follows. Woven jackets constituted 53.4% of the winter jackets produced by casual brands; padded jackets accounted for 25.3%, leather jackets 12.6%, and other jackets 8.7%. Thus, data showed that padded jackets accounted for a considerable proportion of overall winter jacket production. Based on the wearing test results, the basic measurements of a padded jacket for women in their 20s were as follows: bust girth of B/4+3cm front length and B/4+3.5cm back length; waist girth of W/4+3.1 cm front length and W/4+1.9cm back length; and hip girth of H/4+3.3cm front length and H/4+2.8cm back length. The jacket length was set at 62.8cm, with a 63.8cm sleeve length. This study concluded that providing padded jacket manufacturers with basic pattern designs for a well-fitted jacket is expected to boost the efficiency of pattern design processes and the production of padded jackets.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1829-1831
• /
• 2012

Background: The generalized gamma distribution statistics constitute an extensive family that contains nearly all of the most commonly used distributions including the exponential, Weibull and log normal. A saturated version of the model allows covariates having effects through all the parameters of survival time distribution. Accelerated failure-time models assume that only one parameter of the distribution depends on the covariates. Methods: We fitted both the conventional GG model and the saturated form for each of its members including the Weibull and lognormal distribution; and compared them using likelihood ratios. To compare the selected parameter distribution with log logistic distribution which is a famous distribution in survival analysis that is not included in generalized gamma family, we used the Akaike information criterion (AIC; r=l(b)-2p). All models were fitted using data for 369 women age 50 years or more, diagnosed with stage IV breast cancer in BC during 1990-1999 and followed to 2010. Results: In both conventional and saturated parametric models, the lognormal was the best candidate among the GG family members; also, the lognormal fitted better than log-logistic distribution. By the conventional GG model, the variables "surgery", "radiotherapy", "hormone therapy", "erposneg" and interaction between "hormone therapy" and "erposneg" are significant. In the AFT model, we estimated the relative time for these variables. By the saturated GG model, similar significant variables are selected. Estimating the relative times in different percentiles of extended model illustrate the pattern in which the relative survival time change during the time. Conclusions: The advantage of using the generalized gamma distribution is that it facilitates estimating a model with improved fit over the standard Weibull or lognormal distributions. Alternatively, the generalized F family of distributions might be considered, of which the generalized gamma distribution is a member and also includes the commonly used log-logistic distribution.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.5
• /
• pp.1-10
• /
• 2019

Due to the climate change the drought had been occurring more frequently in recent two decades as compared to the previous years. The change in the pattern and frequency of the rainfall have a direct effect on the farming sector; therefore, the quantitative estimation of water supply is necessary for efficient agricultural water reservoir management. In past researches, there had been several studies conducted in estimation and evaluation of water supply based on the irrigational water requirement. However, some researches had shown significant differences between the theoretical and observed data based on this requirement. Thus, this study aims to propose an approach in estimating reservoir rate based on empirical method that utilized observed reservoir rate data. The result of these two methods in comparison with the previous one is seen to be more fitted for both R2 and RMSE with the observed reservoir rate. Among these procedures, the method that considers the drought year data shows more fitted outcomes. In addition, this new method was verified using 15-year (2002 to 2006) linear regression equation and then compare the preceeding 3-year (1999 to 2001) data to the theoretical method. The result using linear regression equation is also perceived to be more closely fitted to the observed reservoir rate data than the one based on theoretical irrigation water requirement. The new method developed in this research can therefore be used to provide more suitable supply data, and can contribute to effectively managing the reservoir operation in the country.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.183-186
• /
• 2007

The type of mixed gel network of $\kappa$-carrageenan/agar was determined by applying rheological principles. Apparent Young's modulus of the mixed gels was mathematically analyzed with (a) simply adding the moduli of two component gels, (b) phase-separated type's upper and lower bound models, (c) interpenetrating type's logarithmic model. The experimental data fitted the estimates from the operation (a). Whereas, as for the models (b), the experimental values in the agar-rich region fitted the estimates of the upper bound model, but in the $\kappa$-carrageenan-rich region slightly deviated from those of the lower bound model. It reflected an evidence of a phase-separated type, although it was not typical, that there must be data good-fit in the agar-rich and $\kappa$-carrageenan-rich regions with the upper and lower bound models, respectively. Experimental values disagreed with estimates of the model (c). Gel time was analyzed to evince the phase-separated type. As agar concentrations increased at a fixed amount of $\kappa$-carrageenan, gel time gradually decreased and then sharply increased and decreased again. The pattern of such change in gel time also represented a typical behavior of phase-separated type's mixed gels.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.1
• /
• pp.55-63
• /
• 1997

A numerical investigation has been made for flows in an axisymmetric circular cylinder with an impulsively rotating cone located at the bottom of the container. The axisymmetric container is completely filled with a viscous fluid. Major parameter for the present research is only the vertex angle of the cone, otherwise Reynolds number and aspect ratio of the vessel are fixed. Main interest concerns on the vortex breakdown of meridional circulation by impulsive rotation of the cone with respect to the longitudinal axis of the cylinder. Numerical method has been used to integrate momentum and continuity equations on a generalized body-fitted grid system. The pattern of vortex breakdown is quite different from that in a right circular cylinder with flat endwall disks. The flow visualization photograph of the preceeding work by Escudier is compared with the present numerical results and the two results are in good agreements. Also flow data are plotted to gain a deep understanding for the present phenomena of the vortex breakdown. The conclusions of this work are clearly explained by the classical theory of the vortex flows in a finite geometry.

• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1191-1204
• /
• 2014

Even though a Han-bok, or traditional Korean costume, should be inherited since it is invaluable part of our culture, research on Han-bok is scarce. Since the development of a Jeogori pattern, the upper garment of Korean traditional clothes, is done mostly based on the chest size, the design does not completely consider on wearer's body shape. Moreover, unless made by an expert, trial and error is almost always necessary to improve the fit of the clothes. In this research, a Jeogori pattern was suggested that improves the fit based on the shape of the upper back(straight or bent) of a female in her late 20s who often wears a Han-bok and is comfortable when moving. Using a 3D virtual clothing system, the optimum pattern was selected based on the body shape. The final selection was made, and each subjects tried the garment on to evaluate the comfort when moving, along with its appearance, based on a seven point Likert scale. As a result, for a straight body shape, the optimum ease for the front bust width was 2.5cm, and that for the back bust width was 2.0cm. The optimum center back dart was 1.0cm. The optimum Geodae width was 7.6cm, and the optimum back Geodae point was 2.0cm. For the bent body shape, the optimum ease for the front and back bust was 2.0cm. The optimum Geodae width was 8.4cm, and the optimum back Geodae point was 1.5cm. Furthermore, if the Hwajang slope was set at half of the vertical distance between the laterals of the neck and shoulder, a fitted silhouette appeared, which is preferred nowadays. In the appearance evaluation, the final pattern designed in this research received higher scores than the original design(straight; p<.001, bent; p<.05). The results of the evaluation of the comfort when moving also showed higher scores for the final pattern that was designed.