• 대한조선학회지
• /
• 제16권3호
• /
• pp.1-8
• /
• 1979

Various approaches to the analysis of stiffened plating in ship structures have been proposed by a number of researchers. Among them, the finite element method is known to be the most powerful method. However, for many parts of ship's structure having simple geometry and boundary conditions, the F.E.M. is often extravagant and unnecessary. In this paper, the authors have attempted to introduce the finite strip method which was proposed by Y.K. Cheung to avoid the difficulties involved in F.E.M. The results of calculations on the displacements and stresses in various plates with or without stiffeners were satisfactory, which shows the F.S.M. is useful for structural analysis of ship's plating.

• Structural Engineering and Mechanics
• /
• 제27권1호
• /
• pp.1-16
• /
• 2007

In the present study, a spline finite strip with higher-order shear deformation is formulated for the stability and free vibration analysis of composite plates. The analysis is conducted based on Reddy's third-order shear deformation theory, Touratier's "Sine" model, Afaq's exponential model and Cho's higher-order zigzag laminate theory. Consequently, the shear correction coefficients are not required in the analysis, and an improved accuracy for thick laminates is achieved. The numerical results, based on different shear deformation theories, are presented in comparison with the three-dimensional elasticity solutions. The effects of length-to-thickness ratio, fibre orientation, and boundary conditions on the critical buckling loads and natural frequencies are investigated through numerical examples.

• 대한토목학회논문집
• /
• 제5권3호
• /
• pp.107-115
• /
• 1985

초기(初期)처짐을 가지는 평판(平板)이 일보면내압축하중(一輔面內壓縮荷重)을 받을 때의 거동을 살피기 위하여 새로운 변위함수(變位凾數)를 도입(導入)한 유한대판법(有限帶板法)을 정식화(正式化)하고, 이 이론(理論)에 따라 컴퓨터 프로그램을 편성(編成)하여 여러 경우에 대한 평판(平板)의 거동을 계산(計算)하고 이미 발표된 결과(結果)와 비교해 보았는데 그 요점은 다음과 같다. 1. Curvature effect를 고려하여 면외변위(面外變位)함수로부터 유도한 식을 참고로 하여 새로운 면내변위(面內變位) 함수를 가정하고 이것을 대판요소(帶板要素)의 변위(變位)함수로 사용한 유한대판법(有限帶板法)을 안식화(定式化)하였다. 2. 위에서 안식화(定式化)한 유한대판법(有限帶板法)에 따라 편성(編成)한 프로그램을 써서 수치해석한 결과 변위증분방식(變位增分方式)이 하중증분방식(荷重增分方式)보다 수렴이 빨랐다. 3. 일축압축(一軸壓縮)을 받는 평판(平板)을 여려 경우에 대해 위의방법으로 해석한 결과는 해석적(解析的) 방법(方法)이나 Crisfield(D)에 의(依)한 유한요소법(有限要素法)으로 얻어진 결과와 잘일치 하였다. 따라서 위의 방법은 평판의 비선형해석을 위한 하나의 유용한 방법으로 생각된다.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.1-8
• /
• 1992

면내거동과 휨거동을 받는 원형구멍을 갖는 유한평판에서 원형구멍 주위의 응력을 모델링하기 위해 p-version 유한요소법이 제시되었으며, 또한 동일한 문제로써 원형구멍으로부터 발생된 균열해석을 위해 균열확장법이 사용되었다. 적분형 르장드르함수에 기초한 p-version 유한요소법이 원형구멍 주위의 응력경사가 심한 기하형상을 모델링하는데 적합함을 보여준다. 한편, 원형 경계조건을 표현하는데 이산화오차를 피하기 위해 초유한사상기법이 사용되었다. 앞에서 제시된 방법을 통한 수치해석 결과는 Nisida, Howland, Newman 등의 실험 및 이론결과와 종래의 유한요소법에 의한 수치해석결과와 비교하여 우수한 값을 보여 주고 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.197-203
• /
• 2004

A full finite element (FE)-based approach is presented for the precision analysis of the strip profile in flat rolling. Basic FE models for the analysis of the mechanical behavior of the strip and of the rolls are described in detail. Also described is an iterative strategy for a rigorous treatment of the mechanical contact occurring at the roll-strip interface and at the roll-roll interface. Then, presented is an integrated FE process model for the coupled analysis of the mechanical behavior of the strip, work roll, and backup roll in four-high mill. A series of process simulation are conducted and the results are compared with the measurements made in hot and cold rolling experiments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.242-251
• /
• 1999

The temperature distribution over the work roll length was estimated by solving a 2-dimensional heat transfer equation based on the rolling conditions and the thermal boundary conditions. In order to solve the governing equation, a finite volume method was employed. In the rolling conditions, the strip temperature, the contact time between roll and strip, the roll speed, the strip thickness, the rolling force and the rolling and idling time were used as input data. In order to verify the accuracy of temperature estimation, roll surface temperatures were measured in the roll shop. The measured temperatures showed a good correlation with the calculated ones.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.224-228
• /
• 2000

The piercing and blanking of thin sheet metal working is specified division in press die design and making. In order to prevent the detects, the optimum design of the production part, strip process layout, die design, die making and try out etc. re necessary the analysis of effective factors. For example, theory and practice of metal shearing process and its phenomena, die structure, machine tool working for die making, die materials and its heat treatment, metal working in industrial and its know how etc. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press. This study regards to the aim of small quantity of production part's press working. Part 1 of this study reveals with production part and strip process layout design.

• 복합신소재구조학회 논문집
• /
• 제4권3호
• /
• pp.1-6
• /
• 2013

In this study, a shape of connector on seismic reinforced strip, which did not cause any physical damage to concrete column and can repair and reinforcement was decided by using nonlinear finite element analysis. Load displacement was applied on the concrete attached by strip. Stress distribution of connector by extension of concrete were checked. Through stress distribution of this analysis results, the most favorable shape was selected as a shape of the connector.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1155-1165
• /
• 1990

본 연구에서는 롤압력과 롤토크를 예측하는 새로운 방법이 제시된다. 이 방 법은 롤 간극에서의 자세한 변형도속도의 분포를 예측할 수 있으며, 특히 롤압력과 롤 토크의 계산에 필요한 유동응력 분포도 계산할 수 있다. 이 방법을 이용하여 압연조 건과 재료성질이 롤압력, 압하력, 롤토그 등에 미치는 영향을 조사하였다. 또한, 이 방법에 의해서 예측된 결과를 참고문헌과 포항제철의 공정 데이터로부터 발췌한 실험 데이터와 비교하였으며, 유한요소 해석결과와도 비교하였다.

• 제어로봇시스템학회논문지
• /
• 제14권3호
• /
• pp.295-300
• /
• 2008

In this paper, a new looper controller is proposed to minimize the tension variation of a strip in the hot strip finishing mill. The proposed control technology is based on a receding horizon control (RHC) to satisfy the constraints on the control input/state variables. The finite terminal weighting matrix is used instead of the terminal equality constraint. The closed loop stability of the RHC for the looper system is analyzed to guarantee the monotonicity of the optimal cost. Furthermore, the RHC is combined with a 4SID(Subspace-based State Space System Identification) model identifier to improve the robustness for the parameter variation and the disturbance of an actuator. As a result, it is shown through a computer simulation that the proposed control scheme satisfies the given constraints on the control inputs and states: roll speed, looper current, unit tension, and looper angle. The control scheme also diminishes the tension variation for the parameter variation and the disturbance as well.