• 지질공학
• /
• 제11권2호
• /
• pp.153-161
• /
• 2001

암반사면의 안정성 평가에 있어서 경험적 평가에 중점을 둔 RMR분류법과 여러 가지 변수들을 이용한 평가방법인 평사투영·한계평형·유한차분·개별요소해석을 실시하였다. 그리고 여러 가지 암반사면의 안정성에 영향을 미치는 변수들의 불확실성을 고려할 수 있는 점추정법에 의한 신뢰성해석과 더불어 퍼지언어를 이용한 퍼지근사추론법의 구조화에 따른 평가방법을 비교·분석 하였다. 그 결과 점추정법의 신뢰성해석을 전 구간의 안정성을 평가 할 수 있으며 퍼지근사추론법에 의한 안정성평가는 다른 기존의 안정성해석 결과와 전반적으로 일치함을 알 수 있다. 이와 같이 RMR분류·평사투영·한계평형·유한차분·개별요소해석과 점추정법의 신뢰성해석, 퍼지근사추론법을 병행하면 암반사면의 특수성을 체계적이고 종합적으로 평가할 수 있다.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.13-17
• /
• 2002

A new system of equations governing the nonlinear thin laminated plates with large deflections using von Karman equations is derived. The effects of transverse shear in the thin interlayer are included as part of the analysis. The finite difference method is used to perform the geometrically nonlinear behavior of the plate. The resultant equations permit the analysis of the effect of transverse shear stress deformation on the overall behavior of the interlayer using the load incremental method. For the purpose of feasibility and validity of this present method, the numerical results are compared with other available solutions for accuracy as well as efficiency. The solution techniques have been implemented and the numerical results of example problem are discussed and evaluated.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2954-2965
• /
• 1996

In this paper, the electromagnetic field characteristics of leaky caxial cable are anlyzed by using the finite difference-time domain(FDTD) technique. Finite difference equations of Maxwell's equations are definedin cylindrical coordinate systems. To simulate the open boundary problem like a free space, the Mur's Absorbing Boundary condition(Mur-ABC) is also used. After modeling the leaky coaxial cable with the three dimensional grid structure, the transient response of the field distribution and the current distribution, the field pattern, the coupling effect are depicted in the time domain.

• 지구물리와물리탐사
• /
• 제6권2호
• /
• pp.77-86
• /
• 2003

자유면 경계조건을 정착하게 묘사할 수 있는 변위근사 유한차분법을 이용하는 시간영역 탄성파 모델링법을 고안하였다. 기존의 변위근사 유한차분법의 경우 변위와 매질의 물성을 격자점에 정의하는 격자군(격자점 기반의 격자군)을 이용하였으나, 이 연구에서 제시하는 새로운 유한차분법에서는 변위는 격자점에 정의하지만 매질의 물성을 격자점으로 둘러싸인 면에 정의하는 격자군(셀 기반의 격자군)을 이용한다. 매질의 물성을 셀에 정의할 경우 자유면에서 응력이 사라진다는 자유면 경계조건을 추가로 적용할 필요가 없으며 매질의 물성 변화만으로 자유면 경계조건을 표현할 수 있다. 수치예를 통한 정확도 분석 결과 셀 기반의 격자군을 이용할 경우 계산된 수치석인 해가 해석적인 해에 매우 근사함을 알 수 있었다.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.50-61
• /
• 1996

The breaking phenomenon of regular periodic waves generated by a numerical wave maker is simulated by finite-difference method which can cope with strong interface motions. The air and water flows are simultaneously solved in the time-marching solution procedure for the Navier-Stokes equation. A density-function technique is devised for the implemenation of the interface conditions. The accuracy is examined and applied to the simulation of two-dimensional breaking phenomena of periodic gravity waves.

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.60-67
• /
• 1997

This paper presents a 3-D finite difference time domain (FDTD) method used for indoor propagation simulations where the electromagnetic wav eis uniformly excited on th eone of the wall in a building and affected by an indoor obstacles. In cases of simulation and measurement, the frequency of 851 MHz is used. The conductivities of walls, floor, ceiling and indoor obstacles are measured and used for simulations. These simulations are carried out using different boundary condition such as mur's absorbing boundary condition (ABC) and perfectly matched layer (PML) technique. The PML technique is found to be well-suited to this analysis because of it's smaller computational domain than mur's ABC. The measured signal strengths are compared to simulated values with good agreement.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1847-1853
• /
• 2000

A computer simulation technique for 2-dimensional laser generated ultrasonic waves was developed for visualization and investigation of ultrasonic propagation in solids. The technique is similar to a finite difference method (FDM) and a mass-particle model method, but uses a new nodal calculation method based on fundamental consideration of an elastic wave equation. By this method, the propagation behavior oflaser generated ultrasonic wave in thermoelastic and ablation mode is visualized and shows good agreement with previous experimental result or the numerical analysis result by Green function.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.9-14
• /
• 1999

본 논문에서는 고속 디지털 회로에서 발생하는 Simultaneous Switching Noise (SSN)를 감소하기 위한 다층 기판 구조를 제안하고 시간 영역 시간 차분법 (Finite Difference Time Domain Method)을 이용하여 그 효과를 확인하였다. 제안된 구조는 전원 평면과 접지 평면사이에 전도성 유전체를 전체 또는 부분적으로 삽입한 구조로 혼신 전압파의 크기를 각각 최대 85%, 55% 까지 줄일 수 있어 고속 고성능 디지털 시스템 구현에 효과적으로 적용될 수 있다.

• 산업기술연구
• /
• 제11권
• /
• pp.85-98
• /
• 1991

A numerical study was performed to investigate characteristics of one-dimensional consolidation of soft clay. Results of consolidation tests with the remolded normally consolidation clay of having a very high initial void ratio were analyzed by using the numerical technique of finite difference method based on the finite strain consolidation theory, to evaluate consolidational characteristics of soft clay under surcharges on the top of clay. On the other hand, a numerical parametric study on soft clay consolidated due to its self-weight was also carried out to find its effect on one-dimensional consolidation. Terzaghi's conventional consolidation theory, finite strain consolidation theories with linear and non-linear interpolation of effective stress - void ratio - permeability relation were used to analyze the test results and their results were compared to each other to figure out the difference between them. Therefore, the validity of theories was assessed.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.1-7
• /
• 2015

Most of chloride diffusion models based on finite difference method (FDM) could not express the diffusion in horizontal direction at each elevation. To overcome these weakness, two dimensional chloride ion penetration model based on finite element method (FEM) to be able to combine various multi-physics simultaneously was suggested by introducing moving mesh technique. To avoid the generation of mesh being able to be distorted depending on the relative movement of water level to static concrete, a rectangular type of mesh was intentionally adopted and the total number of meshes was empirically selected. The simulated results showed that the contents of surface chloride decreased following to the increase of elevation in the top part of low sea level, whereas there were no changes in the bottom part of low level. In the DuraCrete model, the diffusion coefficient of splashed zone is generally smaller than submerged zone, whereas the trend of Life365 model is reverse. Therefore, it could be understood that the developed model using moving mesh technique effectively reflects $DuraCrete^{TM}$ model rather than $Life365^{TM}$ model. In the future, the model will be easily expanded to be combined with various multi-physics models considering water evaporation, heat of hydration, irradiation effect of sun and so on because it is based on FEM.