• 대한수학회보
• /
• 제61권1호
• /
• pp.217-227
• /
• 2024

Let G be an infinite countable group and A be a finite set. If Σ ⊆ A^G is a strongly irreducible subshift of finite type and 𝓖 is the local conjugacy equivalence relation on Σ. We construct a decreasing sequence 𝓡 of unital C^*-subalgebras of C(Σ) and a sequence of faithful conditional expectations E defined on C(Σ), and obtain a Toeplitz algebra 𝓣 (𝓡, 𝓔) and a C^*-algebra C^*(𝓡, 𝓔) for the pair (𝓡, 𝓔). We show that C^*(𝓡, 𝓔) is *-isomorphic to the reduced groupoid C^*-algebra C^*_r(𝓖).

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.275-304
• /
• 2015

The objective of this paper is to investigate the validity of transmitting boundaries in dynamic analysis of soil-structure interaction problems. As a case study, the proposed Baghdad metro line is considered. The information about the dimensions and the material properties of the concrete tunnel and surrounding soil were obtained from a previous study. A parametric study is carried out to investigate the effect of several parameters including the peak value of the horizontal component of earthquake displacement records and the frequency of the dynamic load. The computer program (Mod-MIXDYN) is used for the analysis. The numerical results are analyzed for three conditions; finite boundaries (traditional boundaries), infinite boundaries modelled by infinite elements (5-node mapped infinite element) presented by Selvadurai and Karpurapu, 1988), and infinite boundaries modelled by dashpot elements (viscous boundaries). It was found that the transmitting boundary absorbs most of the incident energy. The distinct reflections observed for the "fixed boundaries" disappear by using "transmitted boundaries". This is true for both cases of using viscous boundaries or mapped infinite elements. The type and location of the dynamic load represent two controlling factors in deciding the importance of using infinite boundaries. It was found that the results present significant differences when earthquake is applied as a base motion or a pressure load is applied at the surface ground. The peak value of the vertical displacement at nodes A, B, E and F (located at the tunnel's crown and side walls, and at the surface above the tunnel and at the surface 6.5 m away from tunnel's centre respectively) increases with the frequency of the surface pressure load for both cases 1 and 2 (traditional boundaries and mapped infinite elements respectively) while it decreases for case 3 (viscous boundaries). The modular ratio Ec/Es (modulus of elasticity of the concrete lining to that of the surrounding soil) has a considerable effect on the peak value of the horizontal displacement at node B (on the side wall of the tunnel lining) increase about (17.5) times, for the three cases (1, 2, and 3).

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.161-169
• /
• 1995

One of the most influential factors on estimating the complex modulus by using longitudinal vibration of a rod-type specimen is the accuracy of the approximate models for describing the dynamic behavior of the specimen. Performance of several approximate models is investigated analytically on the basis of the Pochhammer-Chree theory in case of infinite specimen and numerically on the basis of the finite element analysis in case of finite specimen. The frequency range where each model gives good approximation and its accuracy in that range are determined.

• KSTLE International Journal
• /
• 제2권1호
• /
• pp.46-54
• /
• 2001

The herringbone groove journal bearing (HGJB) has chevron type grooves on stationary or rotating member of the bearing so that they pump the lubricant inward the grooves when journal rotates. As a result, the pressure is generated around the journal so that the radial stiffness and dynamic stability are improved comparing to the plain journal bearing (PJB) when the bearing operates near the concentric condition. The narrow groove theory, conventionally adopted to simulate the concentric operation of HGJB, is limited to the infinite number of grooves. A numerical study of air-lubricated HGJB is presented for the finite number of grooves. The compressible isothermal Reynolds equation is solved by using Finite Element Method together with the Newton-Raphson iterative procedure and perturbation method. The solutions render the static and dynamic performances of HGJB. Comparison of present results with a PJB validates previously published finite difference solution. The HGJB's geometric parameters influence its static and dynamic characteristics. The optimum geometric parameters are presented for the air-lubricated HGJB in particular conditions.

• 한국음향학회지
• /
• 제13권2호
• /
• pp.60-67
• /
• 1994

본 논문은 두 편으로 연결된 논문의 첫 논문으로 무한음향 매질내의 축대칭음향 변환기 음향특성 해석을 위한 유한요소법과 하이브리드형 무한요소법의 결합 알고리즘을 제시하고 이를 이용한 음향변환기의 방사 임피던스, 지향성 및 압전자간의 결합 효과에 대한 수치해석 결과를 제시하였다. 두번째 논문에서는 첫논문의 결과를 기초로 광대역 배역 변환기를 설계하고 설계된 변환가의 음향특성을 해석하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2516-2520
• /
• 2005

In this paper, finite impulse response (FIR) smoothers are proposed for discrete-time systems. The proposed FIR smoother is designed under the constraints of linearity, unbiasedness, FIR structure, and independence of the initial state information. It is also obtained by directly minimizing the performance criterion with unbiased constraints. The approach to the MVF smoother proposed in this paper is logical and systematic, while existing results have heuristic assumption, such as infinite covariance of the initial state. Additionally, the proposed MVF smoother is based on the general system model that may have the singular system matrix and has both system and measurement noises. Thorough simulation studies, it is shown that the proposed MVF smoother is more robust against modeling uncertainties numerical errors than fixed-lag Kalman smoother which is infinite impulse response (IIR) type estimator.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.111-114
• /
• 2001

In this paper, the electromagnetic coupling problems are tackled on slots with nonzero thickness. The analysis is carried out by combination of the thin-wire concept and the Method of Moment(MoM) for the sake of improving computation efficiency. Under the conditions to be presented, slots can be replaced with wires that have effective radii. Also, the infinite summation-type Green's functions are calculated for the parallel-pale structure. A slot in an infinite ground is analyzed and its results are compared with the measurement in a literature. Furthermore, it is examined how the slots couple in parallel plates.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.75-83
• /
• 2004

Ice rubble pieces broken by the bow impact load and side hull of an icebreaking vessel usually pass along the ship's bottom hull and may hit the propeller/rudder or other stern structures causing serious damage to ship's hull . Therefore it is important to estimate the size of broken ice pieces during the icebreaking process. The dynamic interaction process of icebreaker with infinite ice sheet is simplified as a wedge type beam of finite length supported by elastic foundation. The wedge type ice beam is leaded with vertical impact forces due to the inclined bow stem of icebreaking vessels. The numerical model provides locations of maximum dynamic bending moment where extreme tensile stress arises and also possible fracture occurs. The model can predict a failure length of broken ice sheet given design parameters. The results are compared to Nevel(1961)'s analytical solution for static load and observed pattern of ice sheet failure onboard an icebreaker. Also by comparing computed failure length with the characteristic length, the meaning of ice rubble sizes is discussed.

• 대한수학회지
• /
• 제35권4호
• /
• pp.945-960
• /
• 1998

This paper is concerned with investigating the asymptotic behavior of end effects for a generalized heat conduction problem with an added dissipation term defined on a three-dimensional semi-infinite cylinder. With homogeneous Dirichlet conditions on the lateral surface of the cylinder it is shown that solutions either grow exponentially or decay exponentially in the distance from the finite end of the cylinder. In particular, to render decay estimate explicit, we pattern after the analysis of Payne and Song [13, 15]. The continuous dependence effect of perturbing the equations parameters is also investigated.

• 대한수학회보
• /
• 제45권3호
• /
• pp.523-561
• /
• 2008

The purpose of this paper is to survey the use of the important method of scaling in analysis, and particularly in complex analysis. Applications are given to the study of automorophism groups, to canonical kernels, to holomorphic invariants, and to analysis in infinite dimensions. Current research directions are described and future paths indicated.