• 전기화학회지
• /
• 제14권1호
• /
• pp.33-37
• /
• 2011

$Li_4Ti_5O_{12}$는 우수한 안정성으로 고출력 배터리의 음극 물질로 주 목 받고 있다. 그러나 절연체로서 전도도의 개선이 필요한 상황으로 다양한 방법이 시도되고 있다. 본 연구에서는 Cr 도핑을 통해서 $Li_4Ti_5O_{12}$의 전도도 향상을 목표로 하였으며, X-선 흡수 실험 및 FEFF 8.4 코드를 이용한 제일원리 계산을 통해서 도핑에 의한 미세 구조 및 전자 구조의 변화를 분석하였다. Cr 도핑은 페르미 레벨을 Cr d 밴드의 중심에 위치시켜 전도성을향상시켰으며, Ti d 밴드의 전자밀도를 높여 XANES pre-edge및 White line의 변화를 야기했다.

• Journal of Microbiology and Biotechnology
• /
• 제13권2호
• /
• pp.217-224
• /
• 2003

Previously, we developed a CHO cell line (CHO-OTC1-Al9) that expresses the first two enzymes in the urea cycle and exhibits a higher ammonia-removing ability and faster growth rate than a vector-controlled CHO cell line (CHO-neo-5). The current study was undertaken to develop a cell line with an ammonia-removing ability higher than the cell line developed previously. To accomplish this, CHO cell lines expressing the first three, first four, or all five enzymes of the urea cycle were constructed using a stable transfection method. Finally, the CHO-AS-16, CHO-AL-19, and CHO-Arg-11 cell lines expressing the first three, first four, and all five enzymes of the urea cycle, respectively, were selected and found to exhibit higher ammonia-removing ability than the CHO-OTC1-Al9 cell line. Among the three selected cell lines, CHO-AL-19 showed the highest ammonia-removing ability and highest cell viability at a higher cell density, with 40% and 15% lower ammonia concentration in the, culture media than that of CHO-neo-5 and CHO-OTC1-A19 cell lines, respectively. CHO-AL-19 also showed 44% and 10% higher cell viability than the CHO-neo-5 and CHO-OTC-Al9 cell lines, at a higher cell density, respectively. The ammonia concentrations in the culture media were expressed as the ammonia concentration/cell, and the CHO-AL-19 cells revealed 45-60% and 20% lower ammonia concentration/cell than the CHO-neo-5 and CHO-OTC1-Al9 cells, respectively.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.85-92
• /
• 2020

This study adopted soil test and laboratory physical model experiments to simulate the tailings impoundment accumulation process according to the principle of similarity. Relying on the practical engineering, it analyzed the tailings deposition characteristics on dry beach surface during the damming process, as well as the variation rules of dam saturation line. Results suggested that, the tailings particles gradually became finer along the dry beach surface to inside the impoundment. The particle size suddenly changed at the junction between the deposited beach and the water surface, which displayed an obvious coarsening phenomenon. Besides, the deposited beach exhibited the vertical feature of coarse upward and fine downward on the whole. Additionally, in the physical model, the saturation line elevated with the increase in dam height, and its amplitude was relatively obvious within the range of 1.0-4.5 m away from the initial dam. Under flood condition, the saturation line height was higher than that under normal condition on the whole, with the maximum height difference of 4 cm. This study could provide an important theoretical basis for further studies on dam failure experiments and the evolution rules of leaked tailings flow.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.35-39
• /
• 2009

The main objective of this study was to investigate fiber reinforced composite materials (FRCM) with electromagnetic shielding characteristics using aluminum (Al) film and copper (Cu) meshes. This study investigated the electromagnetic interference (EMI) shielding effectiveness (SE) of fiber reinforced composites filled with Al film, Cu meshes, and nano carbon black as hybrid conductive fillers to provide the electromagnetic shielding property of the fiber reinforced composites. The coaxial transmission line method of ASTM D 4935-89 was used to measure the EMI shielding effectiveness of composites in the frequency range of 300 MHz to 1.5 GHz. The variations of SE of FRCM with Al film, fine Cu, and general Cu meshes are described. The results indicate that the FRCM having Al film exhibited up to 75 dB of SE at 1.5 GHz.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.239-246
• /
• 2000

It has been generally much fine contents in West Coast of Korea. When cyclic shear stress causing liquefaction was estimated as using cyclic triaxial tests in these grounds, it didn't appear linear relations between deviator stress and confining stress where σ'₃ was more than 150 kpa. Namely, due to no normalization of cyclic shear stress ratio, the errors of this is increased. Therefore, more confining stress is increased, more increment of deviator stress is decreased. So, using linear relations between tanø'/sub d/ of dynamic internal friction angle and CSR where σ'₃ was less than 150 kpa, liquefaction of these grounds was evaluated. Also, as doing detail evaluation which had carried response analysis of earthquake, this appeared good results which was well compatible with empirical methods using N-value of SPT. It was thought that these result evaluated vulnerable liquefaction area more correct than existing methods. Also, characteristics of liquefaction in West Coast grounds was compared with clean sands, with analysis of behavior of pore pressure ratio and axial strain affected by fine contents, as cyclic loading was applied.

• 복식
• /
• 제56권7호
• /
• pp.68-84
• /
• 2006

The aim of this study is to examine a structure of trousers worn by males in the western world during the 17th and 18th centuries in order to understand the characteristics of evolution in construction. it mainly examined engravings from these era because they provided me fine and detailed portrayals of what it needed to observe. Then, it classified them into models according to each era. it supplemented a flaw of depending on single type of studying material by examining other types of historical materials such as historical paintings and documents for comparative analysis of materials and decorations and previous studies on preserved historical documents to observe the examples of structures of trousers. Secondly, it studied both historical documents and previous studies on the trousers patterns used back in those days, analyzed the characteristics of each designing method by actually draping these patterns, and observed the differences in these completed patterns to understand the characteristics of changes in fashion design skill. As for the changes in length, these patterns show only a slight difference around above and below the knee line. However, the widths of waist, hip, girth and hem were significantly altered over the years to reduce wrinkles and the cutting lines became more refined to make the clothes fit to the body. As a result, a simple but fine patterning technique was born. In particular, new methods in cutting and sewing were invented for detailed parts such as waist, pocket, front and slit.

• 대한수의학회지
• /
• 제33권1호
• /
• pp.23-36
• /
• 1993

To investigate the cycle and relative frequences and the fine structure of seminiferous epithelia in mature Jindo dogs, histologic study was performed. The results obtained were summarized as follows; 1. Type A spermatogonia appeared approximately 1.6 times as many at stage II as compared to stage I while type In spermatogonia appeared small amount in stage III, IV and V. type B spermatogonia were found during the stage VI to VIII, though not detectable during stage I to V. The type B spermatogonia divided at stage VII to produce the preleptotene primary spermatocytes at stage VIII. The number of primary spermatocytes of the leptotene phase markedly increased during stage I to II, and the primary spermatocytes of the pachytene phase were shown the least in number at stage IV. The secondary spermatocytes could be seen only at stage IV. 2. The relative frequencies of each stage from stages I to VIII of the cycle of seminiferous epithelia were 31.6, 11.9, 10.0, 3.2, 8.2, 10.1, 11.7 and 13.2% respectively. 3. On electron microscopic observations, acrosomal vesicle of spermatids appeared larger though the bulk of germ cells were the morphologically same as those of the other animal species. Thread line structures light microscopically observed in the cytoplasm of Sertoli cell were the longitudinal orientation of mitochondria.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.48-50
• /
• 2009

This paper presents an IAQ(Indoor Air Quality) Monitoring System using equipments for measurement of fine Particle($PM1{\sim}PM10$), $CO_2$, VOCs(Volatile Organic Compounds), temperature and humidity for IAQ monitoring of subway station which millions of people use a day. The necessity of IAQ monitoring system is getting increased for more effective subway station monitoring in line with the recent government's regulation for IAQ is reinforcing. Subway Station is an unusual case. The structure of subway station is closed and complicated. Therefore when data of equipments are transferred, transmission error can happen occasionally. To prevent transmission error, an IAQ Monitoring System is needed the appropriate position and selection of equipments or sensor module. In addition IT(Information Technology) can be utilized like "WiBro(Wireless Broadband)" and "GateWay" for facilitate movement of data and construction of IAQ monitoring system of subway station.

• 천문학회보
• /
• 제42권2호
• /
• pp.81.1-81.1
• /
• 2017

L1251B is an excellent example of a small group of pre- and protostellar objects in low-mass star-forming region. Previous interferometer data with a high angular resolution resolved the outflows associated with L1251B into a few components. To understand the physical conditions of the protostellar outflows in L1251B, we mapped this region spectroscopically with Spitzer/IRS and obtained spectral line data from Herschel/PACS. Spitzer/IRS provides the S(0)-S(7) pure rotational lines of H2 as well as fine-structure emissions produced in shocks such as S, [Si II], and [Fe II] and it is a powerful tool for studying shocked interstellar gas. In addition, [O I] lines observed with Herschel/PACS are described well by J-type shock models expected in the outflows from protostars. We will present an analysis of the L1251B protostellar outflow in the H2 pure rotational lines and fine-structure emissions.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.24-31
• /
• 2004

A successful on-line monitoring system for conventional machining operations has the potential to reduce cost, guarantee consistency of product quality, improve productivity and provide a safer environment for the operator. In fine-shape machining, typical signs of tool problems such as vibration, noise, chip flow characteristics and visual signs are almost unnoticeable without the use of special equipment. These characteristics increase the importance of automatic monitoring in fine-shape machining, however, sensing and interpretation of signals ar more complex. In addition, the shafts of the mini-tools break before the typical extensive cutting edge of the tool gets damaged. In this study, the existence of a relationship between the characteristics of the cutting force and tool usage was investigated, and tool breakage detection algorithm by LabVIEW was developed and the following results are obtained. It was possible to use a relative error compare which mainly used in established experiment and investigated tool breakage detection algorithm in time domain which can detect AE and cutting force signals more effective and accurate.