• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.296-299
• /
• 2003

This paper shows a novel and simple IIR/FIR QMF(quadrature mirror filter) filter banks, mixed IIR and FIR structure. Here, FIR filters used for phase compensation. In this paper, we introduced analysis and synthesis filter banks, which used FIR linear phase filters and all pass filters. In result, phase response of analysis and synthesis filter banks become approximately linear characteristic. Simultaneously, a liasing distortion can be completely canceled.

• 한국항해학회지
• /
• 제20권4호
• /
• pp.99-109
• /
• 1996

Though median filter is used for removing noise and smoothing image. But, the result of it has distortion around edge. And then, this paper proposes new noise removing algorithm by recursive morphological processing. Basic operation is same each other, but there is some different processing method between recursive morphology and general morphology theory. This recursive morphological filter can be viewed as the weighted order static filter, and then it has a weighted SE(structuring element). Especially using this algorithm to remove the 10% gaussian noise, this paper confirmed that PSNR is improved about 0.642~1.5757 db reserving edge well better than the results of the traditional median filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.842-846
• /
• 1987

This paper proves that a filter for scramble spectrum is realized by a periodically time-varying digital filter. Further, we propose a design method of this filter by using a bi-frequency map. As an example, we implemented this filter with Digital Signal Processor.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.33-40
• /
• 2005

This study was carried out for effective utilization of recycling resources to investigate the repulping conditions of car air filter waste paper and to evaluate the application into corrugating medium papermaking by blending these repulped pulps. Car air filter waste paper was made of virgin BKP and it was dipped into phenol resin solution. It was well disintegrated by laboratory Valley beater with 10%(basis on oven-dried pulp weight) NaOH addition and defoamer usage. The optimal temperature, beating consistency and treatment time were mainly $40^{\circ}C$, 1% and $30{\sim}40$ minutes, respectively. Handsheets were prepared with various blending ratios between air filter recycled pulp and KOCC. In the case of $10{\sim}20%$ substitution with air filter recycled pulp, physical properties reductions as compressive strength and burst strength of sheets were lower than others. These results showed more favour than the partial substitution of KOCC for corrugating medium even though some strength reduction of paper. It was also observed that the waste water of air filter recycling was not affective to environmental problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.39.3-39
• /
• 2001

Since Kalman filter and wavelet transform techniques are both suitable for a nonstationary process, wavelet-Kalman filter was proposed and applied to various industrial fields. However, the wavelet-Kalman filter subjected to model uncertainty with nonstationary process has not been considered. Thus, the robust wavelet-Kalman filter method is proposed in this paper. The proposed method can prevent the degradation of filter performance when parameter uncertainty exists in both the state and measurement matrices and preserve the merits of the standard Kalman filter in the sense that it produces optimal estimates. A simple example shows that the proposed approach outperforms the standard Kalman filter and the nominal wavelet-Kalman filter.

• 충청수학회지
• /
• 제27권3호
• /
• pp.419-426
• /
• 2014

In this paper, we introduce the notion of a positive implicative filter in BE-algebras. We show that every positive implicative filter is a filter in BE-algebras. We give some examples that a filter may not be a positive implicative filter and also a positive implicative filter may be not an implicative filter in BE-algebras. We also give some equivalent conditions of a positive implicative filter in BE-algebras.

• 전자공학회논문지B
• /
• 제29B권8호
• /
• pp.54-65
• /
• 1992

A huge amount of multiplications is required for 2-D filtering on the image data, making it difficult to implement a real-time quincuncial interpolator. In this paper, efficient design technique and VLSI structures for 2-D multipleierless filter are presented. In the filter design, by introducing an efficient scheme for discretizing the frequency response of the prototype filter, it is shown that a significant amount of the computational burden required in the conventional techniques, such as local search, branch and bound techniques, could be saved. In the case of 5$\times$5 filter, it is found that the design technique described in this paper could save about 80% of the computation time, compared to the conventional methods, while providing a comparable performance. For a hardware implementation, two different VLSI structures for 2-D multiplierless filter are also introduced in the paper : One is for block parallel processing and the other for scan-line parallel processing. In both structure, the AP(area-period) figure improves over Wu's structure[4].

• 분석과학
• /
• 제17권1호
• /
• pp.82-84
• /
• 2004

The quantitative trace analysis of ions could be deteriorated by filter papers because of the effect of adsorption. Generally the adsorption of anions on filter paper did not occurred. Instead, $Cl^-$ and $NO{_3}^-$ ions were extracted from the filter papers. However, most metal ions were adsorbed on the filter papers by the formation of hydroxide in neutral solution. The adsorption of metal ions except $Ag^+$ ion could be avoided depend on the acid concentrations.

• Journal of Power Electronics
• /
• 제12권2호
• /
• pp.326-332
• /
• 2012

This paper proposes a simple active damping algorithm for small-scale wind power systems with an LCL filter. Compared to an L filter or an LC filter, an LCL filter can decrease the harmonics induced by low switching frequencies and produce a satisfactory grid-side current using a comparatively low inductance. Additional active damping of the filter resonance is necessary when an LCL filter is used. This paper introduces an active damping method using a Discrete Fourier Transform (DFT) filter to improve performance without additional sensors or complexity. Experimental results are shown to verify the validity of the proposed algorithm as an active damping method.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (2)
• /
• pp.467-468
• /
• 1998

Impulsive noise appears as black and/or white spots in an image. It is usually caused by errors during the image acquisition or transmission through communication channels. This paper presents a study on the impulsive noise reduction filter of digital image. A much more effective method for removing impulse noise is weighted median filtering. But it loses some information by changing center value with no condition. We propose some new technique to change center value with some conditions. In this paper, the performance of conditional weighted median filter is compared to the commonly used median filter, mean filter, max/min filter, and weighted median filter. A quantitative comparison is performed on MSE (Mean Square Error), RMSE (Root Mean Square Error), and SNR (Signal to Noise Ratio). Proposed conditional weighted median filter can yield better performance than regular filters.