• Journal of applied mathematics & informatics
• /
• 제32권3_4호
• /
• pp.323-330
• /
• 2014

The notion of transitive filters is introduced in lattice implication algebras. A necessary and sufficient condition is derived for every filter to become a transitive filter. Some sufficient conditions are also derived for a filter to become a transitive filter. The concept of absorbent filters is introduced and their properties are studied. A set of equivalent conditions is obtained for a filter to become an absorbent filter.

• 한국연초학회지
• /
• 제28권2호
• /
• pp.136-143
• /
• 2006

This study was conducted to determine the amount of unprotonated nicotine in cigarette mainstream smoke and to investigate its relationship to level of filter ventilation and machine smoking conditions. Unprotonated nicotine from TPM trapped on a Cambridge filter pad(CFP) was adsorbed by Carboxen/PDMS SPME fiber, thermally desorbed and determined by GC/MS. 2R4F reference cigarette, twelve commercial brands from the Korean market and five test cigarette samples, which had the same tobacco blend with different levels of filter ventilation, were analyzed for unprotonated nicotine. In commercial brands, the amount of unprotonated nicotine changed slightly depending on the pH values of smoke, and decreased as the tar level increased. filter ventilation in these commercial cigarettes was $28{\sim}80%$ and the higher filter ventilation increased relative unprotonated nicotine levels, but not significantly. However, in five test cigarettes with different filter ventilation$(0{\sim}70%)$, unprotonated nicotine levels increased almost linearly with the level of filter ventilation. Concentrations of unprotonated nicotine in mainstream smoke generally increased in order $HC\;<\;ISO\;{\leq}\;MDPH$ machine smoking conditions. The ratio of unprotonated nicotine to total nicotine among $cigarettes({\alpha}_{fb})$ increased in order RC < MDPB < ISO conditions. Concentrations of unprotonated nicotine varied with three machine smoking conditions.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.611-612
• /
• 2006

In a manufacturing technique of the sintered filter, pressureless sintering method has good permeability, it is not need the binder and lubricant used on compacting process, so it has little contamination and it is easy to control the pore size and shape but the mechanical strength is low relatively and it is difficult that parts of complicate form are manufactured. In the case of manufacturing the filter by press and sintering method, in order to be satisfactory characteristic of un-pressed filter, in this study sintered metal filter fabricated by using 30-40mesh stainless steel 316L powder and additive agents. Porosity and structure of pores, permeability and mechanical strength of the sintered filter were investigated with the variation sintering conditions. Porosity was nearly constant about $60{\sim}70%$, density, permeability and mechanical strength were changed markedly with quantity of additive materials and sintering conditions.

• 대한수학회보
• /
• 제35권1호
• /
• pp.53-61
• /
• 1998

We introduce the concepts of a positive implicative filter and an associative filter in a lattice implication algebra. We prove that (i) every positive implicative filter is an implicative filter, and (ii) every associative filter is a filter. We provide equivalent conditions for both a positive implicative filter and an associative filter.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.192-195
• /
• 2008

다중 트림 상태에서 헬리콥터용 소형 터보샤프트 엔진에 부착된 센서의 고장을 검출하기 위한 방법을 제시한다. 먼저 헬리곱터의 엔진, 로터, 되먹임(feedback) 제어루프가 포함된 비선형 모델을 구하고 다중 트림 상태에서의 선형 모델을 추출하였다. 고장 검출 방법은 칼만필터에 기반한 방법을 채용하였는데 트림 상태가 변화할 때에 필터의 추정값이 연속적으로 변화하도록 상태변수 초기값을 재구성하였다. 또한 어떠한 센서가 고장이 일어났는지 구분할 수 있도록 어떤 센서의 고장을 검출한 다음 문제가 없는 경우 다음 센서의 고장 검출을 수행하는 단계적인 방법을 사용하였다. 시뮬레이션을 통하여 제시한 방법이 다중 트림 상태에서 각 센서의 고장을 잘 검출함을 보였다.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.105-112
• /
• 2019

On the purpose of conform the more stringent government regulation for turbid stormwater from construction sites, the feasibility and availability of synthetic fiber placing after the conventional protection barrier were tested in this study. Initially, comparative work on the filtering performance of fiber media and conventional gravel filter was carried out, 27% higher filtration capacity was obtained under the similar operational conditions. The filter efficiency was about 20 to 52% with a varying filter depth of 5 to 15cm, presuming at extreme storm flow conditions (800-1500 m/day of filtration rates). Fiber filter was found to have a similar filtration prosperity as grain media; namely, the separation efficiency is directly and inversely proportional to filter depth and rate, respectively. The effects of filter aid (polyaluminium chloride) on filter performance was also investigated, it greatly affected the turbidity reduction at the dosage of 2 mg/L. At the time of breakthrough, a simple filter washing was carried out, herein, the solid recovery achieved over than 88% and greatly determined by operational parameters. Based on the operational data, the empirical models aimed for predicting filtration efficiency were established, which can effectively determine the required filter depth and filtration area in field.

• 충청수학회지
• /
• 제27권3호
• /
• pp.419-426
• /
• 2014

In this paper, we introduce the notion of a positive implicative filter in BE-algebras. We show that every positive implicative filter is a filter in BE-algebras. We give some examples that a filter may not be a positive implicative filter and also a positive implicative filter may be not an implicative filter in BE-algebras. We also give some equivalent conditions of a positive implicative filter in BE-algebras.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제1권1호
• /
• pp.55-64
• /
• 1997

We show that if an even length filter has the same length complementary filter in a generalized linear phase case, the complementary filter is unique, we find sufficient conditions for a unique existence of even length N complementary filter in a quadrature mirror filter bank, and we find all higher degree symmetric filters of length N + 4m which are complementary to a given symmetric filter of even length N.

• 한국산업보건학회지
• /
• 제25권4호
• /
• pp.542-553
• /
• 2015

Objectives: Many types of dust collector are used for industrial ventilation, with the most common types being the cylinder bag filter system, rectangular bag filter system and cylinder type cartridge filter system. The cylinder type cartridge bag filter, which has more filtering area than other types of bag filter, can increase the pulse time and extend the useful life of the filter. This can save operational costs and installation area. Materials: This study used cylinder type cartridge bag filter equipment and tested the impact of vibration level and filter pressure with different pulse jet cleaning conditions. The final, cleaning efficiency was calculated through input dust mass and cleaning dust mass Conclusions: Two optimum cleaning condition groups were found. The first condition group was $3kgf/cm^2$ pulse pressure, 15 cm pulse distance, 0.2 s pulse time with an H-10 type nozzle. The second condition group was $3kgf/cm^2$ pulse pressure, 15 cm pulse distance, 0.3 s pulse time with an H-10 type nozzle.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1554-1561
• /
• 2005

Geotextiles form one of the two largest groups of geosynthetics and it is consisted two major types of synthetic material (Woven, Non-woven). The functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Within these functions, however, there are a large number of applications or use areas. Although the many research scholar and engineer developed and established the design criteria and construction methodology of geosynthetics filter layer, because the lack of suitable design terminology and uncertainty of long term durability, sustainable research still needed for optimum design methodology to the complicate field conditions. Especially, more intensive research needed about under the cyclic flow condition and fine silty sand base material. In this paper, the filter model test performed under cyclic flow with various boundary conditions (period and frequency of cyclic flow, types of geosynthetic filter material, surcharge etc.).