• 한국환경복원기술학회지
• /
• 제7권6호
• /
• pp.49-53
• /
• 2004

This study was aimed to promote evergreen ferns native to Korea as a material for interior landscape by investigate effects of light quality on the growth of Cyrtomium falcatum and Rumohra aristata, in an indoor environment that artificial light was used, especially. Result of experiments are as follows; 1. Wavelengths were measured as control(=570~580nm), red(=600~610nm), yellow(=550~580nm), green(=500~510nm) and blue(=430~440nm) between different color film. The order of photon flux density was red>yellow>control>green>blue decreased. 2. Although there was no difference in the growth of Cyrtomium falcatum depending on light quality, in case of fronds with sori and new fronds, there were highest under red film. Fresh weight was no significant in all treatments, but dry weight was increased with green>control>yellow>blue>red in order. 3. In case of Rumohra aristata, there was no difference in its growth, however, number of total fronds was highest under green film. Although fresh weight was increased with yellow film, dry weight was highest under green film.

• 한국전기전자재료학회논문지
• /
• 제24권2호
• /
• pp.108-111
• /
• 2011

The semiconducting material of ZnO in II-VI group was well known as its good application for photo electronics, chemical sensors and field effect transistors due to the remarkable optical properties with wide energy band gap and great ionic reactivities. Up to now the growth of a good quality of ZnO film has been issued for better performances. Even though there were many deposition methods for making ZnO films, pulse laser deposition methods have been preferred for high crystalline films. In this report, the ZnO film was also created by pulsed laser deposition technique which also showed high crystalinity. By controlling several factors when deposited, it was investigated that the optimal condition for ZnO film formation. Mainly, oxygen partial pressures and growth temperatures were changed when ZnO films were synthesized and followed the characterization by HRXRD and AFM.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.46-46
• /
• 2002

It is well known that thin film growth and surface morphology can be substantially modified by ion-bombardment during the deposition. This is particularly important in case of thin-film deposition at low temperatures where the film growth occurs under highly nonequilibrium conditions. An attractive way to promote crystalline growth and surface morphology is deposition of additional energy in to the surface of the growing film by bombardment with hyperthermal particles. We were deposited crystalline Ti and TiN thin films on Si substrate by magnetron sputtering method with grid. Its thin films were highly smoothed and dense as increasing grid bias. In order explore the benefits of a bombardment of the growing film with high energetic particles. Ti and TiN films were deposited on Si substrates by an unbalanced magnetron sputter source with attached grid assembly for energetic ion extraction. Also, we have studied the variation of the plasma states by Langmuir probe and Optical Emission Spectroscopy (OES). The epitaxial orientation. microstructual characteristics. electrical and surface properties of the films were analyzed by XRD. SEM. Four point probe and AFM.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.419-419
• /
• 2012

We fabricated the Polyamide 4,6 (PA46) thin film using Adipoyl chloride and 1,4-butadiamine. PA46 film was grown at $70^{\circ}C$ by Molecular Layer Deposition (MLD) method. MLD is sequential and self-terminating fabrication method for organic thin film. The growth rate of PA46 is $3.5{\acute{\AA}}$ cycle. The thickness of PA46 film was measured by Ellipsometer. Surface morphology of this film was investigated by Atomic Force Microscopy (AFM) and roughness is directly proportional to number of growing cycles.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.352-359
• /
• 2017

The growth of nanocrystalline diamond films on a p-type poly silicon substrate was studied using microwave plasma chemical vapor deposition method. A 6 mm thick poly silicon plate was mirror polished and scratched in an ultrasonic bath containing slurries made of 30 cc ethanol and 1 gram of diamond powders having different sizes between 5 and 200 nm. Upon diamond deposition, the specimen scratched in a slurry with the smallest size of diamond powder exhibited the highest diamond particle density and, in turn, fastest diamond film growth rate. Diamond deposition was carried out applying different DC bias voltages (0, -50, -100, -150, -200 V) to the substrate. In the early stage of diamond deposition up to 2 h, the effect of voltage bias was not prominent probably because the diamond nucleation was retarded by ion bombardment onto the substrate. After 4 h of deposition, the film growth rate increased with the modest bias of -100 V and -150 V. With a bigger bias condition(-200 V), the growth rate decreased possibly due to the excessive ion bombardment on the substrate. The film grown under -150V bias exhibited the lowest contact angle and the highest surface roughness, which implied the most hydrophilic surface among the prepared samples. The film growth rate increased with the apparent activation energy of 21.04 kJ/mol as the deposition temperature increased in the range of $300{\sim}600^{\circ}C$.

• 한국표면공학회지
• /
• 제21권2호
• /
• pp.68-75
• /
• 1988

To know the growth behavior of Conductive polyaniline file, the anodic oxidation of anilien on a platiunm in aqueous sulfuric acid solution has been studied. Cyclic votammetry and currenttime transisents method used to investigate the anodic oxidation of aniline to polyaniline films on a platinum. The oxidation of aniline is shown to occur in several steps dependent on the potential. it the phase growth resembles the deposition of a metal film.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.796-799
• /
• 2002

BSCCO thin films are fabricated via a co-deposition process at an ultra-low growth rate using ion beam sputtering. The sticking coefficient of Bi element exhibits a characteristic temperature dependence. This temperature dependence of the sticking coefficient was explained consistently on the basis of the evaporation and sublimation processes of Bi$_2$O$_3$.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.59-69
• /
• 1997

이트리움 실리사이드($YSi_2$)는 $400^{\circ}C$ 이상의 진공열처리 중 고상반응에 의하여 (100)Si 기판상에서 $YSi_2$의 (1100)면이 방향성 성장을 하였으며, $YSi_2$ 박막과 (100)Si 기판과의 방위관계는 [0001]$YSi_2$//[011i]Si과 [0001]$YSi_2$//[011]Si이었다. 그러나 방위관계에서도 알 수 있는 바와 같이 $YSi_2$는 [1100]$YSi_2$의 domain이 상호간에 $90^{\circ}$의 방위각을 이루며 성장하는 이른바 double-domain 구조를 나타내었다. 이는(1100)$YSi_2$면과 Si기판과의 계면에서 커다란 격자 불일치의 이방성 때문이라 생각되며, 각각의 domain은 (2201) 비대칭 반사면의 $\omega$-mode rocking curve 측정 결과, 거의 동등한 체적율과 결정성을 나타내었다. 본 연구에서는 이러한 double-domain의 형성기구를 (1100)$YSi_2$면과 (100)Si기판과의 계면에서 정합 모델에 근거한 기하학적 matching 관계로 설명하였다.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.697-702
• /
• 1995

The rough growth surfaces of diamond films fabricated by the hot filament CVD were polished using thermomechanical polishing method. And then, its application to the optical windows was discussed through the measurement of transmittance in the range of infrared radiation and analysis of surfaces structure. The results were compaerd with those of the films polished with conventional mechanicla polishing. The transmittance of the mechanically polished film reached 57~66% over the whole range from 500 to 4000 cm-1. But the transmittance of the film polished with thermomechanical polishing method was reduced below 35%. This decrease in transmittance was due to both the graphitization of diamond on the polished surface and the growth of $\beta$-SiC at diamond/Si interface during polishing. The residual Fe in hte thermomechanically polished surface was confirmed by SIMS analysis. This Fe played the role of the graphitization of near surface region of the diamond film.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.13-13
• /
• 2010

The solar energy conversion will take 10 % global energy need by 2033. A thin film type solar cell has been considered as one of the promising candidates for a large area applicable solar cell fabrication at a low cost. The metal-assisted growth of microcrystalline Si (mc-Si) films has been reported for a quality Si film synthesis at a low temperature. It discusses the spontaneous growth of a Si film above a metal-layer for a thin film solar cell. Quite recently, a substantial demand of nanomaterials has been addressed for cost-effective solar cells. The nanostructure provides a large photoactive surface at a fixed volume, which is an advantage in the effective use of solar power. But the promising of nanostructure active solar cell has not been much fulfilled due mainly to the difficulty in architecture of nanostructures. We present here the Si nanowire (SiNW)-embedded Schottky solar cell. Multiple SiNWs were connected to two different metals to form a Schottky or an ohmic contact according to the metal work function values. It discusses the scheme of rectifying contact between metals and SiNWs and the SiNW-embedded Schottky solar cell performances.