• 한국재료학회지
• /
• 제20권5호
• /
• pp.257-261
• /
• 2010

A non-volatile resistive random access memory (RRAM) device with a Cr-doped $SrZrO_3/SrRuO_3$ bottom electrode heterostructure was fabricated on $SrTiO_3$ substrates using pulsed laser deposition. During the deposition process, the substrate temperature was $650^{\circ}C$ and the variable ambient oxygen pressure had a range of 50-250 mTorr. The sensitive dependences of the film structure on the processing oxygen pressure are important in controlling the bistable resistive switching of the Cr-doped $SrZrO_3$ film. Therefore, oxygen pressure plays a crucial role in determining electrical properties and film growth characteristics such as various microstructural defects and crystallization. Inside, the microstructure and crystallinity of the Cr-doped $SrZrO_3$ film by oxygen pressure were strong effects on the set, reset switching voltage of the Cr-doped $SrZrO_3$. The bistable switching is related to the defects and controls their number and structure. Therefore, the relation of defects generated and resistive switching behavior by oxygen pressure change will be discussed. We found that deposition conditions and ambient oxygen pressure highly affect the switching behavior. It is suggested that the interface between the top electrode and Cr-doped $SrZrO_3$ perovskite plays an important role in the resistive switching behavior. From I-V characteristics, a typical ON state resistance of $100-200\;{\Omega}$ and a typical OFF state resistance of $1-2\;k{\Omega}$, were observed. These transition metal-doped perovskite thin films can be used for memory device applications due to their high ON/OFF ratio, simple device structure, and non-volatility.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.103-109
• /
• 2014

Highly efficient hydrogenated nanocrystalline silicon (nc-Si:H) thin-film solar cells were prepared on flexible stainless steel substrates using plasma-enhanced chemical vapor deposition. To enhance the performance of solar cells, material properties of back reflectors, n-doped seed layers and wide bandgap nc-SiC:H window layers were optimized. The light scattering efficiency of Ag back reflectors was improved by increasing the surface roughness of the films deposited at elevated substrate temperatures. Using the n-doped seed layers with high crystallinity, the initial crystal growth of intrinsic nc-Si:H absorber layers was improved, resulting in the elimination of the defect-dense amorphous regions at the n/i interfaces. The nc-SiC:H window layers with high bandgap over 2.2 eV were deposited under high hydrogen dilution conditions. The vertical current flow of the films was enhanced by the formation of Si nanocrystallites in the amorphous SiC:H matrix. Under optimized conditions, a high conversion efficiency of 9.13% ($V_{oc}=0.52$, $J_{sc}=25.45mA/cm^2$, FF = 0.69) was achieved for the flexible nc-Si:H thin-film solar cells.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.663-668
• /
• 2012

In order to reduce the indium contents in transparent conducting oxide(TCO) thin films of $In_{1.6{\sim}1.8}Zn_{0.2}Sn_{0.2{\sim}0.4}O_3$ (IZTO), $In_{1.6}Zn_{0.2}Sn_{0.2}O_{3-{\delta}}$(IZTO) was prepared by replacing indium with Zn and Sn. The TCO films were deposited via RF-magnetron sputtering of the IZTO target at various deposition temperatures and its film characteristics were investigated. When deposited in an Ar atmosphere at $400^{\circ}C$, the electrical resistivity of the film decreased to $6.34{\times}10^{-4}{\Omega}{\cdot}cm$ and the optical transmittance was 80%. As the deposition temperature increased, the crystallinity of the IZTO film was enhanced. As a result, the electrical conductivity and transmittance properties were improved. This demonstrates the possibility of replacing ITO TCO film with IZTO.

• 한국자기학회지
• /
• 제21권6호
• /
• pp.214-218
• /
• 2011

본 연구에서는 DC 마그네트론 스퍼터링을 이용해 MgO 단결정 기판 위에 성장된 Ag/CoFeB 박막의 스퍼터링 조건에 따른 박막 미세구조의 변화를 연구하였다. Ag 박막의 결정성 및 표면 거칠기는 인가전력(sputtering power) 및 증착온도의 변화에 따라 증착온도가 증가하는 경우 (200) 방향의 결정성이 향상되는 것을 확인하였으며, 인가전력이 증가되는 경우 표면 거칠기가 감소하는 것을 확인하였다. 또한 고분해능 TEM(transmission electron microscopy) 및 XRR(X-ray reflectivity) 측정을 통해 MgO 기판 위 Ag층의 켜쌓기 성장 및 MgO 기판과 Ag층 사이에 산화층에 해당하는 계면층이 존재하는 것을 알 수 있었으며, 증착온도의 증가에 따른 Ag의 섬상구조 형성 및 intermixing 효과에 의한 Ag/CoFeB 계면층의 변화 및 자기적 특성의 변화를 연구하였다.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.567-577
• /
• 2019

Aluminum nitride (AlN) has versatile and intriguing properties, such as wide direct bandgap, high thermal conductivity, good thermal and chemical stability, and various functionalities. Due to these properties, AlN thin films have been applied in various fields. However, AlN thin films are usually deposited by high temperature processes like chemical vapor deposition. To further enlarge the application of AlN films, atomic layer deposition (ALD) has been studied as a method of AlN thin film deposition at low temperature. In this mini review paper, we summarize the results of recent studies on AlN film grown by thermal and plasma enhanced ALD in terms of processing temperature, precursor type, reactant gas, and plasma source. Thermal ALD can grow AlN thin films at a wafer temperature of $150{\sim}550^{\circ}C$ with alkyl/amine or chloride precursors. Due to the low reactivity with $NH_3$ reactant gas, relatively high growth temperature and narrow window are reported. On the other hand, PEALD has an advantage of low temperature process, while crystallinity and defect level in the film are dependent on the plasma source. Lastly, we also introduce examples of application of ALD-grown AlN films in electronics.

• Journal of Ceramic Processing Research
• /
• 제20권5호
• /
• pp.484-489
• /
• 2019

VO2 is an attractive candidate as a transition metal oxide switching material as a selection device for reduction of sneak-path current. We demonstrate deposition of nanoscale VO2 thin films via thermal atomic layer deposition (ALD) with H2O reactant. Using this method, we demonstrate VO2 thin films with high-quality characteristics, including crystallinity, reproducibility using X-ray diffraction, and X-ray photoelectron spectroscopy measurement. We also present a method that can increase uniformity and thin film quality by splitting the pulse cycle into two using scanning electron microscope measurement. We demonstrate an ON / OFF ratio of about 40, which is caused by metal insulator transition (MIT) of VO2 thin film. ALD-deposited VO2 films with high film uniformity can be applied to next-generation nonvolatile memory devices with high density due to their metal-insulator transition characteristic with high current density, fast switching speed, and high ON / OFF ratio.

• 한국재료학회지
• /
• 제15권4호
• /
• pp.271-274
• /
• 2005

We investigated the crystalline and electrical properties of ZnO thin films for transparent electrode as a function of the oxygen pressures during the deposition. The ZnO thin films were deposited on a flexible teflon substrates by the pulsed laser deposition. From the X-ray diffraction, ZnO films showed c axis oriented ZnO(0002) crystal structure. The FWHM (full width at half maximum) values decreased from $0.51^{\circ}\;to\;0.34^{\circ}$ as the oxygen pressure increased from 0.1 mTorr to 10.0 mTorr showing the improvement of crystallinity. The resistivity and hall mobility of ZnO film deposited at the oxgen pressure of 0.1 mTorr at $200^{\circ}C$ was about $5\times10^{-4}\Omega{\cdot}cm\;and\;20cm^2/V{\cdot}s$, respectively. The optical transmittance of the ZnO films on flexible teflon substrate was found to be above $85\%$.

• 센서학회지
• /
• 제15권2호
• /
• pp.120-126
• /
• 2006

Physicochemical and electrical properties for hydrogen gas sensors based on Pd-deposited $WO_3$ thin films were investigated as a function of Pd thickness, annealing temperature, and operating temperature. $WO_3$ thin films were deposited on an insulating material by thermal evaporator. XRD, FE-SEM, AFM, and XPS were used to evaluate the crystal structure, microstructure, surface roughness, and chemical property, respectively. The deposited films were grown $WO_3$ polycrystalline with rhombohedral structure after annealing at $500^{\circ}C$. The addition effect of Pd is not the crystallinity but the suppression of grain growth of $WO_3$. Pd was scattered an isolated small spherical grain on $WO_3$ thin film after annealing at $500^{\circ}C$ and it was agglomerated as an irregular large grain or diffused into $WO_3$ after annealing at $600^{\circ}C$. 2 nm Pd-deposited $WO_3$ thin films operated at $250^{\circ}C$ showed good response and recovery property.

• 한국포장학회지
• /
• 제8권2호
• /
• pp.39-43
• /
• 2002

Increasing use of plastics in food packaging materials has led to the issue of food-plastic packaging materials's mutual interactions. Although the plastic packaging materials are generally considered as inert, migration and sorption of fatty materials are some of the problems associated with their use. So, this work investigated the compatibility of three structurally different polymers, polypropylene (PP), polyethyleneterephthalate (PET) and ethylene vinyl alcohol copolymer (EVOH) with some structurally different food fats. The main goal was to study the sorption of food fats by the plastic films and to see what extent mechanical properties of the plastic films was affected by plasticization effect due to sorption of fatty materials. PP, PET, and EVOH films was immersed in pure triglycerides, and then extracted with hexane and analyzed for the amounts of fat migrated. The sorbed films were also investigated for change in mechanical properties. Result showed that structural factor of the films and fatty materials plays important role in th migration process. The fat with the simplest structure are migrated more easily that the fat with more complex structure. However, structural effect of migration was varied according to degree of crystallinity and density of plastic films. In addition to that, polarity of plastic film was affected migration of fatty materials significantly. Additional research is needed to justify the reason why migration of fatty materials into the films was affected by polarity and structural integrity.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.420-425
• /
• 2012

The new organic semiconductors which are composed of divinylbenzene core unit and alkoxynaphthalene on both sides, 1,4-bis-2-(6-octyloxy)naphthalen-2-ylvinylbenzene (BONVB), 1,4-bis-2-(6-decyloxy)naphthalen-2-ylvinylbenzene (BDNVB) and 1,4-bis-2-(6-dodecyloxy)naphthalen-2-ylvinylbenzene (BDDNVB) were synthesized by Wittig reaction. The structures of obtained BONVB, BDNVB and BDDNVB were confirmed by FT-IR and mass spectroscopy. UV-absorption of thin film showed H-aggregates and J-aggregates due to closely packed structure between adjacent molecules. The characterization of vacuum-evaporated films by Xray diffraction (XRD) and atomic force microscopy (AFM) showed that the chain length of alkoxy group affects the crystallinity and morphology. BONVB with octyloxy group showed the mobility of $0.011cm^2/V{\cdot}s$, on/off ratio of $1.31{\times}10^5$, and a subthreshold slope of 0.93 V.