• 공업화학
• /
• 제18권5호
• /
• pp.407-414
• /
• 2007

Moldflow사의 CAE 해석 프로그램인 MPI (Moldflow Plastics Insight)를 이용하여 PP(polypropylene)에 talc 20%가 들어간 수지를 사용한 자동차 공기 청정기 상부 덮개의 최적 공정을 찾았다. 핀 게이트가 하나인 기존 시스템을 CASE-1, 두 개로 새로운 공정을 CASE-2로 디자인하여 두 공정에 대한 유동 발란스 등을 비교하였다. CASE-2는 충진 시간이 더 짧아 생산성과 공정성의 향상이, 유동성과 부피수축율이 하부 덮개와 유사하게 나타나 조립성과 조립 후의 변형 및 물성발현이 향상되었다. 또한 전단속도와 전단응력의 해석결과, CASE-1의 문제점은 잔류 응력에 의한 것보다는 상 하부 덮개의 크기 차이에 의한 것으로 판단되며, 결국 수지의 배향 문제는 게이트 구조를 최적화 함으로써 파손 문제를 해결할 수 있을 것이라 예상된다.

• International Journal of Vascular Biomedical Engineering
• /
• 제2권2호
• /
• pp.16-26
• /
• 2004

The object of this study is to develop a mathematical model of the hemodialysis system including the mechanism of solute kinetics, water exchange and also cardiovascular dynamics. The cardiovascular system model used in this study simulates the short-term transient and steady-state hemodynamic responses such as hypotension and disequilibrium syndrome (which are main complications to hemodialysis patients) during hemodialysis. It consists of a 12 lumped-parameter representation of the cardiovascular circulation connected to set-point models of the arterial baroreflexes, a kinetic model (hemodialysis system model) with 3 compartmental body fluids and 2 compartmental solutes. We formulate mathematically this model in terms of an electric analog model. All resistors and most capacitors are assumed to be linear. The control mechanisms are mediated by the information detected from arterial pressoreceptors, and they work on systemic arterial resistance, heart rate, and systemic venous unstressed volume. The hemodialysis model includes the dynamics of urea, creatinine, sodium and potassium in the intracellular and extracellular pools as well as fluid balance equations for the intracellular, interstitial, and plasma volumes. Model parameters are largely based on literature values. We have presented the results on the simulations performed by changing some model parameters with respect to their basal values. In each case, the percentage changes of each compartmental pressure, heart rate (HR), total systemic resistance (TSR), ventricular compliance, zero pressure filling volume and solute concentration profiles are represented during hemodialysis.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.147-157
• /
• 2012

This paper aims to examine the fundamental relationship of what principles cause the aesthetic shapes in Korean sarangbang furniture of the $19^{th}$ century. Focusing on the Greimas' isotopic and semantic structure analysis, this research analyzed the traditional Korean men's furniture in four steps; signifier analysis, isotopic analysis, semantic structure analysis, and comprehensive interpretation. The results show that the expressive qualities of sarangbang furniture included visual symmetric aesthetics, and the hues of natural materials with dark tones. The manufacturing process emphasized the characteristics of natural materials; while diversity was respected in decorations, function as restrained form was also important with a concise image. Through these characteristics, sarangbang furniture revealed a balance, a harmony of contrastive elements, and a restrained aesthetics. Within these qualities, it was seen that aesthetic principles, such as "severance and communication," "artifice and nature," "restraint and manifestation," "toughness and softness," "filling and emptying" and "decoration and utility" were in a mutually supplementary relationship. At the basis of this aesthetic thought appears to be Confucianism, which had been the model for seonbi politics and scholarship.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.60-65
• /
• 2001

To simulate the real molding conditions, the effects of phase change and compressibility of the resin were considered in the present investigation. A modified Cross model with either an Arrhenius-type or WLF-type functional form was used for modeling viscosity of the resin. A double-domain Tait equation of state was employed to describe the compressibility of the resin during molding. The energy balance equation including latent-heat dissipation fur semi-crystalline materials was solved in order to predict the solidified layer and temperature profile. Injection molding experiments were carried out using polypropylene(PP) in the present study. Based on the comparison between experiments and simulations, it was found out the predicted pressure distributions and melt front propagations were accurate. Thus it was concluded that the program developed in this study was proved to be useful in simulations of injection molding process.

• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.151-157
• /
• 2021

본 논문은 조기퇴직자들의 퇴직금을 충당하는데 있어 최소의 초기 투자금만으로 최대의 재태크로 인한 수익금으로 충당하는 방법을 다룬다. 이 문제에 대해 Guéret et al.은 Mosel 프로그램을, Edvall은 해를 찾아가는 명확한 규칙없이 단지 CPLEX Branch-and-Cut MIP Solver 프로그램을 구현하여 해를 얻었다. 본 논문에서는 이 문제에 대해 만기도래기간이 긴 채권부터 역으로 채권 수를 결정하는 계산식을 제시하고, 채권 만기도래의 연속적 효과를 고려하여 채권 수 최적화를 수행하여 채권 수를 확정하였으며, 부족액은 역으로 1년만기 적금의 원금과 이자로 충당하는 계산식을 제시하였다.

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.

• 한국지반환경공학회 논문집
• /
• 제10권4호
• /
• pp.33-40
• /
• 2009

성토 시공시, 경제적인 시공을 위해 절 성토량의 균형은 중요하게 고려되어야 할 사항이다. 그러나 실제 완성기면까지 성토시 성토체 자체의 압축침하와 연약지반 성토시 발생하는 제체하부 원지반의 압밀침하, 암 버럭 사이의 간극 메움에 의한 침하와 강우와 유출시 발생하는 토량 손실에 의한 성토량의 부족분이 발생하고 있다. 성토량의 부족분에 대한 지침은 도로공사 시방서에 토량환산계수를 통해 설계하도록 되어 있지만 성토체 자체의 압축침하에 의한 부족분은 고려되고 있지 않다. 따라서 본 연구에서는 이세전(伊勢田)(1972)와 석정(石井)(1976)가 제안하고 있는 성토체의 제체압축침하량 산정기법을 적용하여 국내 여러 현장의 성토체를 대상으로 발생가능한 압축침하량을 산정하였다. 본 연구결과 성토고 및 성토재의 종류에 따라 성토고의 약 3~10%내외의 전침하량이 발생하는 것으로 나타났다. 그러므로 실제 설계시 성토재의 특성 및 성토고를 고려한 성토체의 즉시침하 및 크리프 침하를 반영한 설계가 필요할 것으로 판단된다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E1호
• /
• pp.29-36
• /
• 2002

The selective catalytic reduction (SCR) reaction of promoter catalysts was investigated in this study. A pure anatase type of TiO$_2$ was used as support. Activation measurement of prepared catalysts was practiced on a fixed reactor packing by the glass bead after filling up catalysts in 1/4 inch stainless tube. The reaction temperature was measured by K-type thermocouple and catalyst was heated by electric furnace. The standard compositions of the simulated flue gas mixture in this study were as follows: NO 1,780ppm, NH$_3$1,780ppm, $O_2$1% and $N_2$ as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 45$0^{\circ}C$, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH$_3$/NO ratio and of $O_2$ concentration was practiced at 1,1.5 and 2, respectively. The respective space velocity were as follows . 10,000, 15,000 and 17,000 hr-1. It was found that the maximum conversion temperature range was in a 5$0^{\circ}C$. It was also found toi be very sensitive at space velocity, $O_2$ concentration, and NH$_3$/NO ratio. We also noticed that the maximum conversion temperature of (W, Mo, Sn) -V$_2$O$_{5}$/TiO$_2$ catalysts was broad. Specially WO$_3$-V$_2$O$_{5}$TiO$_2$2 catalyst appeared nearly 100% conversion at not only above 30$0^{\circ}C$ ut also below 25$0^{\circ}C$. At over 30$0^{\circ}C$, NH$_3$ oxidation decreased with decrease of surface excess oxygen. In addition, WO$_3$-V$_2$O$_{5}$TiO$_2$ catalyst did not appear to affect space velocity, $O_2$ concentration, and NH$_3$/NO ratio.ratio.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.216-218
• /
• 1995

A new atrial pressures balancing method for moving actuator total artificial heart(TAH) without an extra compliance chamber is developed. The structural characteristics of the pendulous moving actuator have made it possible to compensate the left and right pump output difference by utilizing the interventricular air space as an internal compliance chamber in a pump housing. Furthermore, the balancing performance is increased through the improvement of the flexibility of part of the polyurathane housing. However, the increase of the flexibility of the housing causes a little loss of the cardiac output due to the reduction of active filling performance. In this paper, a good condition between the balance and pump output performance is evaluated by adjusting the air volume in the interventricular space through a series of in vitro experiment.

• Journal of Chest Surgery
• /
• 제28권6호
• /
• pp.542-548
• /
• 1995

The goal of this study is to develop an effective control system for cardiac output regulation based upon the preload and afterload conditions without any transducers and compliance chambers in the moving actuator type total artificial heart. Motor current waveforms during the actuator movement are used as an input to the automatic control algorithm. While the current waveform analysis is performed, the stroke length and velocity of the actuator are gradually increased up to the maximum pump output level. If the diastolic filling rate of either right or left pump begins to exceed the venous return, atrial collapse will occur. Since the diastolic suction acts as a load to the motor, this critical condition can be detected by analyzing the motor current waveforms. Every time this detection criterion is met, the control algorithm decreases the stroke velocity and length of the actuator step by step just below the critical detection level. Then, they start to increase. In this way the maximum pump output under given venous return can be achieved. Additionally the control algorithm provides some degree of afterload sensitivity. If the aortic pressure is detected to exceed 120 mmHg, the stroke length and velocity decrease in the same way as the response to the preload. Left-right pump output balance is maintained by proper adjustment of the asymmetry of the stroke angle. In the mock circulatory test, this control system worked well and there was a considerable range of stroke volume difference with adjustment of the asymmetry value. Two ovine experiments were performed. It was confirmed that the required cardiac output regulation according to the venous return could be achieved with adequate detection of diastolic function, at least in the in vivo short-term survival cases[2-3 days . We conclude that this control algorithm is a promising method to regulate cardiac output in the moving actuator type total artificial heart.