• Journal of Mushroom
• /
• v.17 no.3
• /
• pp.126-131
• /
• 2019

This study sought to identify the optimum substrate composition for the stable bottle cultivation of Sparassis latifolia. The main substrate was fermented larch sawdust. Six nutrient sources were mixed at a maximum volume ratio of 20%. The fresh weight of fruit body was the highest at 128.5 g for GMSL69033 and 126.6 g for 'Neoul' in the treatments of beet pulp and corn flour in a volume ratio of 15:5. In addition, the total cultivation period was 94 days, which was shorter than that required for other treatments. The selected substrate characteristics were pH 4.7, C:N (carbon to nitrogen) ratio of 106:4, moisture content of 70%, and air filling porosity of 38%. We plan to develop new income items through research on mycelial incubation and fruit body growth conditions.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.143-152
• /
• 2019

Purpose: The aim of this study is to investigate the characteristics of patients and teeth referred to a university dental hospital for endodontic problem. Materials and Methods: From January, 2017 to December, 2018, patients who were referred to a university dental hospital for endodontic problem were collected from clinical records. A total of 1171 patient records were analyzed. The status of the referred teeth was divided into three groups according to whether they were treated endodontically based on radiographs and clinical records at the time of referred visit. Results: 69.9% of the referred teeth were maxillary and mandibular first and second molars. The average time from referral to actual visit is 9.03 days and 65.6% of the case referred with referring letter. The most primary reasons of referral were persistent clinical symptom (pain, swelling, and sinus tract) (37.9%), diagnosis difficulty (16.7%), blockage of canal space (13.8%) and difficult tooth anatomy (11.4%). In the case of referral before endodontic treatment, the most primary reason of referral was failure to make a proper diagnosis. If the teeth were referred in the middle of endodontic treatment, the most primary reason of referral was persistent clinical symptom and blockage of canal space. In the case of referral after root canal filling, the most primary reason of referral was persistent clinical symptom. Conclusion: In the case of molars, the rate of persistent clinical symptom and blockage of canal space were the most primary reason of referral, and the rate of apical surgery and management of trauma was high in the case of anterior teeth.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.2
• /
• pp.87-102
• /
• 2019

Pallancata Ag mine is located at the Ayacucho region 520 km southeast of Lima. The geology of mine area consists of mainly Cenozoic volcanic-intrusive rocks, which are composed of tuff, andesitic lava, andesitic tuff, pyroclastic flow, volcano clasts, rhyolite and quartz monzonite. This mine have about 100 quartz veins in tuff filling regional faults orienting NW, NE and EW directions. The Ag grades in quartz veins are from 40 to 1,000 g/t. Quartz veins vary from 0.1 m to 25 m in thickness and extend to about 3,000 m in strike length. Quartz veins show following textures including zonation, cavity, massive, breccia, crustiform, colloform and comb textures. Wallrock alteration features including silicification, sericitization, pyritization, chloritization and argillitization are obvious. The quartz veins contain calcite, chalcedony, adularia, fluorite, rutile, zircon, apatite, Fe oxide, REE mineral, Cr oxide, Al-Si-O mineral, pyrite, sphalerite, chalcopyrite, galena, electrum, proustite-pyrargyrite, pearceite-polybasite and acanthite. The temperature and sulfur fugacity ($f_{s2}$) of the Ag mineralization estimated from the mineral assemblages and mineral compositions are ranging from 118 to $222^{\circ}C$ and from $10^{-20.8}$ to $10^{-13.2}atm$, respectively. The relatively low temperature and sulfur-oxygen fugacities in the hydrothermal fluids during the Ag mineralization in Pallancata might be due to cooling and/or boiling of Ag-bearing fluids by mixing of meteoric water in the relatively shallow hydrothermal environment. The hydrothermal condition may be corresponding to an intermediate sulfidation epithermal mineralization.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.60-85
• /
• 2014

The study is for tracing the mutational process, considering the transformational process of wooden chamber tombs in Gyoungju region during 2~6 century. In addition, class features and the meaning of tombs were studied. First of all, the wooden chamber tombs were classified into 10 different styles(1A~IVC), based on the filling materials, the ways of structure, and the structure of burial chamber. There were only one or two tombs that belongs to the highest classes 'Ga'~'Da' in each period, which has the numeral features. Furthermore, the styles of the central wooden chamber tombs according to the period and the region have distinctive features and have changed so far. It shows that there are the rank among the tombs in the regions. In other words, regarding the ranks of the class 'Ga'~'Cha', there were strict rules and the limitations on the size of the tombs and the number and the quality of the burial relics. It means that the inner-outer size or the structure of the tombs and the number, quality of the burial goods depended on the buried person's birth or social classes, or achievements. Based on Shila social classes, the class 'Ga' tombs were for the highest classes when considered the size, burial relics, and the quality. The class 'Na' and 'Da' tombs were for the higher classes, 'Ma' for middle classes, 'Ba', 'Sa' for lower classes. In addition, 'Ah', 'Ja' tombs were for higher commoner, 'Cha' for lower commoner. Thus, class 'Ga'~'Sa' is the leading class of Shila.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.71-77
• /
• 2019

Recently, most of the pile foundations have been applied as a method to transfer the heavy load of the structure to the ground with high bearing capacity. In this study, the pile-cap behavior between foundation and hollow-head precast reinforced concrete(HPC) pile reinforced with longitudinal rebar and filling concrete was experimentally evaluated depending on the cyclic load and reinforcement ratio. As the drift ratio increases, it was found that the cracks pattern and fracture behavior of two types of pile-cap specimens according to the reinforcement ratio were evaluated to be similar. As the reinforcement ratio increases by 1.77 times, the BS-H25 specimen increases the maximum load by 1.47 times compared to the BS-H19 specimen. However, the ductility ratio of positive and negative was decreased by 76% and 70% respectively. After the yielding of the pile-cap reinforcing rebars, the positive and negative stiffness of the all specimens were decreased by a range from 66% to 71% and a range from 54% to 57% respectively, and the average stiffness of BS-H25 specimen is 13% higher than that of BS-H19 specimen. The cumulative dissipated energy capacity of BS-H19 and BS-H25 specimen under ultimate load state is 5.5 times and 6.6 times higher than that of service load state.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2019

It is an urgent issue to manage and reduce non-point pollution sources for improving the water quality of stream and lakes in rural areas. In this study, in order to reduce non-point pollution sources in rural area, Gabion mattresses was proposed to provide protection of riverbanks with anaerobic and aerobic area. The utilization of this was assessed by lab scale model test and pilot plant test. After filling the inside of the gabion mattresses with aggregate, the filtration zone under anaerobic and aerobic conditions was formed to treat the contaminants. In addition, vegetation was deposited on the surfae of the gabion to prevent the inflow of soil and to promote purification by the plant. COD and nitrogen content (T-N, $NH_4{^+}$, -N, $NO_3{^-}N$) were monitored in model and field tests. The lab scale model test showed removal efficiency of 17% of TCOD, 35% of SCOD, 14% of TN, 62% of $NH_4{^+}$, -N, and 33% of $NO_3{^-}$ N. Also, pilot plant test showed removal efficiency of 24% of TCOD, 29% of SCOD, 47% of TN, 50% of $NH_4{^+}-N$, 33% of $NO_3{^-}$, N and 29% of TP.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.37-43
• /
• 2019

This research studied production of lightweight filling production for sink hole restoration utilizing various industrial by-products(2kinds of fly ash, petro-cokes CFBC ash, blast furnace slag fine particle). For this purpose, the mixed raw material properties(compressive strength) behaviors according to the blending ratio of industrial by-products were examined by applying the experimental design method and statistical analysis was performed using the commercial program MINITAB. Compressive strengths of industrial by-products were strongly dependent on blast furnace slag powder. Compressive strength(3days aging) was 3~11MPa depending on the amount of blast furnace slag powder used. The use of CFBC fly ash was evaluated to have the least effect on compressive strength. In addition, the compressive strength and the coefficient of permeability were measured by preparing foamed concrete for the experimental batch 1 condition in the mixture experimental design. In this case, the bulk density is 0.9 to 1.0, the apparent porosity is 30 to 50%, the compressive strength(3days old) is 1 to 2MPa, and the permeability coefficient is $10^{-2}$ to $10^{-3}cm/sec$.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.4
• /
• pp.19-26
• /
• 2021

The high-level radioactive waste (HLW) produced from nuclear power plants is disposed in a rock-mass at a depth of hundreds meters below the ground level. Since HLW is very dangerous to human being, it must be disposed of safely by the engineered barrier system (EBS). The EBS consists of a disposal canister, backfill material, buffer material, and so on. When the components of EBS are installed, gaps inevitably exist not only between the rock-mass and buffer material but also between the canister and buffer material. The gap can reduce water-retarding capacity and heat release efficiency of the buffer material, so it is necessary to investigate properties of gap-filling materials and to analyze gap spacing effect. Furthermore, there has been few researches considering domestic disposal system compared to overseas researches. In this reason, this research derived the peak temperature of the bentonite buffer material considering domestic disposal system based on the numerical analysis. The gap between the canister and buffer material had a minor effect on the peak temperature of the bentonite buffer material, but there was 40% difference of the peak temperature of the bentonite buffer material because of the gap existence between the buffer material and rock mass.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.193-203
• /
• 2019

The aim of this study was to analyze the relationship between rice yield and climate elements in Daegu (southern plain area) and Andong (inland mountainous area) regions. Over the past 20 years, rice yield has increased in both regions. The rice yield of middle and mid-late maturing cultivars in the recent 5 years increased by about 10% and 18%, respectively, compared to that produced in the early 2000s in the Daegu region. In the Andong region, the rice yield of mid-late maturing rice cultivars in the recent 5 years was higher by about 7% than that of the early 2000s. The number of panicles per hill and grain ripening rate significantly affected rice yield in mid-late maturing cultivars. In addition, the grain weight and grain ripening rate significantly affected rice production in middle maturing cultivars grown in the Daegu region. With regard to the middle maturing cultivars, the relationship between grain weight and rice yield had a positive significant correlation in both regions. To understand the effect of climate factors on rice yield, the milled rice yield of several rice cultivars produced over the past 20 years (1999-2018) at both locations, Daegu and Andong, were evaluated. The rice yields increased owing to long sunshine duration during the grain filling stage in the Daegu region. In Andong, rising maximum temperature during the vegetative stage increased rice yield of early and mid-late maturing cultivars. Long sunshine hours increased yield of mid-late maturing cultivars in both regions.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.5
• /
• pp.43-50
• /
• 2011

As a result of population growth and economic growth, household and industrial wastes continue to rapidly increase every year. Especially, sewage sludge produced at final stage is increasing with the constant construction and putting in good order of the sewage plant. In addition to the government's prohibition for filling up the sludge, it became more and more difficult to discharge wastes to the sea as London Dumping Convention '96 came into effect. And sewage sludge and the livestock wastes are expected to be thoroughly prohibited from discharging to the sea from 2012. So we need desperately economical and useful alternatives to compact and reuse these wastes. The purpose of this study is to evaluate the utilization of solidified sludge-soil mixture as an enhancement and covering material. To determine the proper mixed ratio of solidified sludge, this study conducted basic physical properties tests, compaction tests, uniaxial compression tests, and permeability test. It was found that the higher the ratio of solidified sludge, the lower the coefficient of permeability. Upon the results of particle size distribution, the mixed ratio of solidified sludge that meet the enhancement material condition was 59% or lower for SP granite soil and 48% or lower for SM granite soil respectively.