• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.153-161
• /
• 2022

Among all industries, the construction industry still remains a traditional one with low productivity due to its labor-intensive and field-dependent production system, its supplier-oriented industrial structure, and the disruption of the information flow between participants. In addition, the construction industry in South Korea has recently been required to transform itself according to social trends such as aging, the reduction of skilled workers, and the shortening of working hours, and the disaster and death rates in the industry, which are more than twice as high as those in other industries, are making it more necessary to solve chronic safety problems. Therefore, the purpose of this study is to grasp the actual condition of safety management on construction sites in South Korea and analyze cases of K-smart technology utilization for preventing safety accidents on construction sites. The study investigated and analyzed the following. First, construction sites in South Korea were analyzed by type of safety accident, by type of construction, and by construction contract amount. Second, the current status of accidents on small-sized construction sites with a high fatal accident rate and cases of safety accidents on construction sites were investigated. The results of the study are expected to contribute to the dissemination and spread of smart safety technology for not only identifying major factors in safety accidents that occur on construction sites but also preventing workers from suffering accidents.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2024

Objectives: The study was performed to investigate characteristics of hazardous factors regarding chemical(liquid lime) tank dredging workers by case survey. Methods: Field data such as working condition, MSDS and respirators applied to chemical tank dredging work were analyzed and the work environmental factors of noise and indoor air quality were measured to compare existing data with actual work situations. Results: No health hazards to workers due to working conditions were confirmed during dredging work inside the chemical storage tank. All air quality measurement data during dredging work satisfied the management standards, and there were no by-products. During dredging work, there was a significant change in noise depending on the type of work, but considering the noise reduction rate(NRR) of the earplugs worn by workers, there was no actual health hazard due to noise exposure. Conclusions: A fit test for respirator and the expiration date of the safety helmet should be observed to ensure an appropriate level of safety and health for dredging workers in the chemical storage tank.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.3
• /
• pp.19-27
• /
• 2024

This study analyzes the impact of occupational health risk assessments on the safety and health levels and the safety behaviors of workers in manufacturing workplaces. An online survey was conducted among 3,172 companies, yielding 637 responses. The statistical analysis on the collected responses revealed three key findings. First, the safety and health levels (safety importance, safety comprehension, safety awareness) positively influence the outcomes of occupational health risk assessments(safety practice, safety management, safety improvement) and safety behaviors (activity change, safety check). Second, the effectiveness of occupational health risk assessments has a positive impact on safety behaviors. Lastly, the effectiveness of occupational health risk assessments partially mediate the relationship between safety and health levels and safety behaviors. These findings are expected to contribute to the promotion of risk assessments in the field of industrial health and to enhancing safety performance by improving workplace safety, health levels, and safety behavior.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.18-24
• /
• 2024

Efficient path planning for mobile crane lifting operations in the construction industry is essential for ensuring smooth machinery operation, worker safety, and the timely completion of projects. The inherently complex construction sites, characterized by dynamic environments, constantly changing conditions, and numerous static and mobile obstacles, underscore the necessity for advanced algorithms capable of generating optimal paths under various constraints. Mobile crane path planning algorithms have been researched extensively and possess the potential to resolve the challenges presented by construction sites. However, the application of these algorithms in actual construction sites is rare, suggesting a need for ongoing research and development in this field. This paper begins by systematically identifying and analyzing relevant research papers using predetermined keywords, providing a comprehensive review of the current state of mobile crane path planning algorithms. Specifically, it categorizes mobile crane path planning algorithms into four main groups: Graph search-based algorithms, Sampling-based algorithms, Nature-inspired algorithms, and Newly developed algorithms. It performs a critical analysis of each category, offering guidance to researchers exploring path planning solutions suitable for the dynamic and complex environments of construction sites. Through this review, we affirm the need for continued interest and attempts at new methodologies in mobile crane path planning, suggesting improvements for further research and practical application of these algorithms.

• Convergence Security Journal
• /
• v.16 no.2
• /
• pp.35-53
• /
• 2016

For the development of national competency standards to successfully perform the duties by systemizing the contents of education and training such as knowledge technology grounding required to perform the duties in the industrial field, the necessity has been raised in that it can solve the time and cost of re-investment through retraining and train high-quality human resources required in the industrial field. For the development of the education and training process with a focus on duty performers for the security sector classifying work and duties into 1:1 among sub-categories based on the NCS classification system, this study enhances the site suitability of security sector education and proposes the development of the practical education and training process required by the industry by using NCS development manual and DACUM technique, the worker-centered job analysis considering 'correlation' with the actual work, 'applicability' of progress and 'efficiency' for costs and time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.141-147
• /
• 2005

Usually, processing whole project or a part of frame work delays due to acceleration, changing orders, management, characters of project. overtime, worker crowding, early occupation in the field of construction. Through a whole project, these factors cause decreasing construction labor-productivity which is the most dependent in business of construction. These kind of decreasing of construction labor-productivity cause many negative effects, just as extension of time, increasing cost in project of construction. Regardless of characters of construction or decreasing labor-productivity, extension of time is a incident which needs acceleration, also it cause a high possibility of claim and dispute. The productivity has just a broad meaning in business of construction. That's why it's difficult to apply in the field of construction. Especially, factors increasing or decreasing labor-productivity is defined by analysis of working as qualitative and outlined evaluation. However, study of the each factor decreasing construction labor-productivity analysis has not researched, because of difficulty of systematic measurement and management. The existed studies about management of productivity are just focused on estimation of productivity, not on evaluation of productivity. It was true that I couldn't examine clearly about the analysis of how much important per each the factor which have influence on labor-productivity because of the characteristic as qualitative that the labor productivity have On this study, i tried to get the factors decreasing of labor- productivity with gathering opinions of panels of expert's studies about the factors decreasing of labor-productivity on project of construction through Delphi method and i evaluated the result factors as quantitatively and subjectively about importance of factors decreasing construction labor-productivity Analysis, using AHP Method by Saaty. Also, using Delphi and AHP method, 1 suggest substantiated method qualitative factors are measured by quantitative criteria.

• Korean Journal of Social Welfare
• /
• v.62 no.4
• /
• pp.5-32
• /
• 2010

Although social work practice skills are one of the important components of social work practice, research on social work practice skills has been very scarce. It seems that the reason might be a lack of standardized instruments used to measure social work practice skills. The purpose of this study is to validate a Korean version of the Practice Skills Inventory(PSI) developed by O'Hare and colleagues. The PSI is the only instrument developed in the field of social work to measure the frequency of social work practice skills that social workers use. A total of 310 social workers working in medical or mental health field were participated in this study. A result of confirmatory factor analysis showed that the Korean version of the PSI is composed of 4 factors like its english version. The Korean version of the PSI was also reliable and valid. Implications for social work research, practice and education are provided.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.81-86
• /
• 2016

The WMSDs are known to occur more in upper extremity than lower extremity, and such a ratio is increasing each year. The motions or repeated work requiring excessive strength beyond worker's maximum grip strength were known as a major cause of the WMSDs in upper extremity. To prevent the WMSDs in upper extremity, research on the grip strength characteristics analysis of field workers that can be used as basic data for work design and manual tool design is needed. The purpose of this study is to identify various variables affecting grip strength and is to find out the impacts of grip strength on WMSDs. This research measured the grip strength of 327 field workers at Heavy Industries, and also conducted a questionnaire survey on individual characteristics and job characteristics. As a result of analyzing grip strength, the grip strength was statistically significant (P<0.1) according to the body surface area (BSA) of the research subjects. The differences between percentile groups of grip strength were statistically significant (P<0.1) according to pain levels of hand/wrist/finger and arm/elbow. The comparison results between the average grip strength of Korean adult males and the average grip strength of the survey-targeted heavy industry workers show that the average grip strength of the heavy industry workers was higher by 9.75 kg. This study analyzed relationship between grip strength and the pain levels of hand/wrist/finger and arm/elbow, and compared the findings in this study with those of existing preceding studies. Also, this research comparatively analyzed the grip strength of Korean adult males and survey-targeted heavy industry workers. The findings of this study can be used as useful data for ergonomic work design and manual tool design to prevent WMSDs at industrial worksites, given that almost no data on the grip strength of workers in the industrial sites are found in Korea.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.166-171
• /
• 2011

We use the electrical energy and it is essential energy in modern life, but we lay cable underground due to the issue for environment and safety. Safety for worker is still insufficient for the development of safety equipment and related research has been focused on the cable lifetime diagnosis at underground cable work. I have to develop live line detector around the magnetic field were investigated at underground cable. In this paper, we were investigated by variation of coil turns and load due to detection of magnetic field at lines around. And detected value of developing products compared with measured value of milli-gauss meter. As a result, the value of the number of coil turns was found to be proportional to the measured value. But turn-numbers increase showed that the weak noise. I could be confirmed that sensor showed the optimum value from 4,000 to 5,0000.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.